Shop our Airplanes Products Drone Products Sales
Thread Tools
Old Apr 11, 2012, 03:51 PM
WiseDuck is offline
Find More Posts by WiseDuck
Mmmmmmm!
WiseDuck's Avatar
Thankfully, I no longer have to worry about this. I found a 2.3mm prop collet at the local rc store and I was able to push it on. The motor is now glued back inside, the fuselage has been glued together and all seams have been taped up with glass-fibre lined tape. Now I just need to grab some sandpaper at work so I can roughen up the CF rods before gluing them to the fuselage and whatnot. Should have this thing up and running in no time!
Sign up now
to remove ads between posts
Old Apr 11, 2012, 08:14 PM
NorCalMatCat is offline
Find More Posts by NorCalMatCat
FPV Electronics For Life!
NorCalMatCat's Avatar
I have had my bix all setup for FPV for 3 days, but the weather has not cooperated at all! It's sunny now but winds are 20+ Hopefully tomorrow.
Old Apr 11, 2012, 11:12 PM
Maddmax is offline
Find More Posts by Maddmax
Registered User
It's been like that here as well. Too windy for FPV. Did manage to get my other planes up yesterday with gusts to 30+mph. Quite challenging. Heading back out in the morning.
Old Apr 11, 2012, 11:13 PM
flyandi is offline
Find More Posts by flyandi
Registered User
The Bixler loves the wind :-) Go on a slope and you don't even have to use any power... can be in the air for hours :-)
Old Apr 11, 2012, 11:16 PM
Maddmax is offline
Find More Posts by Maddmax
Registered User
No slopes around here. You have those nice CALI winds out there.
Old Apr 13, 2012, 06:52 PM
NorCalMatCat is offline
Find More Posts by NorCalMatCat
FPV Electronics For Life!
NorCalMatCat's Avatar
First Post Crash FPV Flight - 4/13/2012 (4 min 44 sec)


First FPV flight since the crash and 1 month absence... My video RX was NOT this bad, my EZCap is messing up on the horizontal sync for some reason which I need to try to see what I can do to fix that. Also 15 to 20mph winds so it was a bit of a bumpy ride
Old Apr 13, 2012, 08:45 PM
Eagle202 is offline
Find More Posts by Eagle202
Registered User
Eagle202's Avatar
Quote:
Originally Posted by NorCalMatCat View Post
http://www.youtube.com/watch?v=lrYow-3IGnM

First FPV flight since the crash and 1 month absence... My video RX was NOT this bad, my EZCap is messing up on the horizontal sync for some reason which I need to try to see what I can do to fix that. Also 15 to 20mph winds so it was a bit of a bumpy ride
Glad you were finally able to get it back up.

That must have been hard to fly with the video breaking up like that.

Unless that's normal for you.
Old Apr 13, 2012, 08:51 PM
NorCalMatCat is offline
Find More Posts by NorCalMatCat
FPV Electronics For Life!
NorCalMatCat's Avatar
Quote:
Originally Posted by Eagle202 View Post
Glad you were finally able to get it back up.

That must have been hard to fly with the video breaking up like that.

Unless that's normal for you.
It was just like that on recording, my live display was very crisp and clear the entire flight.
Old Apr 13, 2012, 11:54 PM
sammyc is offline
Find More Posts by sammyc
I need a bigger shed..
sammyc's Avatar
Quote:
Originally Posted by NorCalMatCat View Post
It was just like that on recording, my live display was very crisp and clear the entire flight.
I posted on your youtube video about horizontal sync, I had a similar issue with my nova osd and easycap. Fix is to install a potentiometer/resistor on video wire between rx and easycap.
Old Apr 14, 2012, 12:19 AM
sammyc is offline
Find More Posts by sammyc
I need a bigger shed..
sammyc's Avatar
Quote:
Originally Posted by NorCalMatCat View Post
It was just like that on recording, my live display was very crisp and clear the entire flight.
Hey mate, potentiometer info as requested. This is the one I used: http://www.jaycar.com.au/productView...SUBCATID=968#1

But I would use a 500ohm pot for more precision: http://www.jaycar.com.au/productView...SUBCATID=968#1

Very simple use a multimeter to find resistance and check wire order to find preferered direction of rotation.
Old Apr 14, 2012, 12:30 AM
sammyc is offline
Find More Posts by sammyc
I need a bigger shed..
sammyc's Avatar
Latest FPV video with bixler some tree dodging fun
FPV fun! Easter 2012 (5 min 10 sec)
Old Apr 14, 2012, 01:13 AM
NorCalMatCat is offline
Find More Posts by NorCalMatCat
FPV Electronics For Life!
NorCalMatCat's Avatar
Quote:
Originally Posted by sammyc View Post
Hey mate, potentiometer info as requested. This is the one I used: http://www.jaycar.com.au/productView...SUBCATID=968#1

But I would use a 500ohm pot for more precision: http://www.jaycar.com.au/productView...SUBCATID=968#1

Very simple use a multimeter to find resistance and check wire order to find preferered direction of rotation.
Awesome!
Old Apr 14, 2012, 01:19 AM
NorCalMatCat is offline
Find More Posts by NorCalMatCat
FPV Electronics For Life!
NorCalMatCat's Avatar
Quote:
Originally Posted by sammyc View Post
Hey mate, potentiometer info as requested. This is the one I used: http://www.jaycar.com.au/productView...SUBCATID=968#1

But I would use a 500ohm pot for more precision: http://www.jaycar.com.au/productView...SUBCATID=968#1

Very simple use a multimeter to find resistance and check wire order to find preferered direction of rotation.
Your only using 2 legs of the pot?
Old Apr 14, 2012, 03:13 AM
Flypoppa is online now
Find More Posts by Flypoppa
Me a long time ago
Flypoppa's Avatar
Quote:
Originally Posted by NorCalMatCat View Post
Your only using 2 legs of the pot?
That's all you need. One wire in and one wire out.
Old Apr 14, 2012, 03:59 AM
NorCalMatCat is offline
Find More Posts by NorCalMatCat
FPV Electronics For Life!
NorCalMatCat's Avatar
I'm going to see if radio Shack has one when I go there in the morning to get an rp-sma-sma connector for my 1 watt 2.4Ghz amp


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Sky Surfer or HK Bixler??? fpsazerbaijan Electric Plane Talk 11 Mar 17, 2012 06:43 AM
Sold 1800kv Motor/prop for Sky Surfer / Bixler / Easy Star tdab Aircraft - Electric - Power Systems (FS/W) 1 Nov 01, 2011 05:46 PM
Sold Bixler Sky Surfer Hawk Sky ARF or complete kit porcia83 Aircraft - Electric - Airplanes (FS/W) 1 Sep 14, 2011 10:24 AM
Discussion Review of my Sky Surfer AKA Bixler , Flew Today for the first time. dllhg Electric Plane Talk 19 Aug 10, 2011 11:41 AM
Discussion Propeller recommendations Bixler/ sky surfer sean11 Power Systems 3 Jun 25, 2011 07:08 AM