Lumenier RB2205C-12 2400KV SKITZO Ceramic Bearing Motor
Thread Tools
Old Jul 05, 2012, 01:40 PM
Bhuwan is offline
Find More Posts by Bhuwan
Registered User
Thanks everyone!
Sign up now
to remove ads between posts
Old Jul 05, 2012, 09:28 PM
Maddmax is offline
Find More Posts by Maddmax
Registered User
For those of you that asked how I reinforce my wings, here are a couple of pics. The additional rods are 2mm thick. The front one goes all the a=way across alost to the bend in the wing. The back rod goes all the way also and runs between the aileron and servo. Gorilla glue is then allowed to flow into each hole and then the rods are inserted and worked back and forth to allow even coverage. In these pics they are hanging out for illustration only. The finished product will be cut flush with the wing. The next step, which is optional, is to cover the wings in 3mil clear laminate.
Old Jul 06, 2012, 12:26 AM
Javatango is offline
Find More Posts by Javatango
Registered User
Quote:
Originally Posted by Eagle202 View Post
I use Velcro and a snap swivel tied to the battery cable inside the plane.

I also have a rubber band as a third connection point.

Vince
My set up is very similar. I use Dual Lock type velcro on the nose of the plane to secure the keychain camera. Only problem is that I get a the "jello effect" whenever the motor is running.
Old Jul 06, 2012, 01:44 AM
sammyc is offline
Find More Posts by sammyc
I need a bigger shed..
sammyc's Avatar
Quote:
Originally Posted by Javatango View Post
My set up is very similar. I use Dual Lock type velcro on the nose of the plane to secure the keychain camera. Only problem is that I get a the "jello effect" whenever the motor is running.
Balance your prop
Old Jul 06, 2012, 02:34 AM
Javatango is offline
Find More Posts by Javatango
Registered User
Quote:
Originally Posted by sammyc View Post
Balance your prop
Already balanced. I think I may need a secondary securing method. Maybe wrapping velcro around the fuselage and camera.
Old Jul 06, 2012, 02:55 AM
sammyc is offline
Find More Posts by sammyc
I need a bigger shed..
sammyc's Avatar
Quote:
Originally Posted by Javatango View Post
Already balanced. I think I may need a secondary securing method. Maybe wrapping velcro around the fuselage and camera.
Balance it better, or maybe even balance your spinner, or check motor shaft isn't bent.
I know the velcro leaves some give, isn't a rigid mount. but, to get wobbly video, there has to be vibes coming from somewhere.
Think about it, if there are no vibes, whats making the camera 'float' about on the 'non rigid mount', causing jello?
Old Jul 06, 2012, 03:17 AM
Eagle-Eye is offline
Find More Posts by Eagle-Eye
Closed Account
Quote:
Originally Posted by Javatango View Post
Already balanced. I think I may need a secondary securing method. Maybe wrapping velcro around the fuselage and camera.
I have had very good success with stuffing the keycam inside a tic tac box, velcro to nose and then wrap #64 rubber band around fuse.
Old Jul 06, 2012, 09:14 AM
Maddmax is offline
Find More Posts by Maddmax
Registered User
Better yet, use better cameras!!!!
Old Jul 06, 2012, 09:57 AM
Eagle-Eye is offline
Find More Posts by Eagle-Eye
Closed Account

Xtreme Keycam flight test


Not bad from a keycam video. But this flight is the hard way

Old Jul 06, 2012, 11:00 AM
Eagle202 is offline
Find More Posts by Eagle202
Registered User
Eagle202's Avatar
Quote:
Originally Posted by Maddmax View Post
Better yet, use better cameras!!!!
Don't get me wrong. I would love to have a GoPro or another high end camera but they are very expensive.

The # 16 808 works great with a class 10 memory disc. It gives really good solid video and is cheap at $38 for the camera and $10 for the memory disc.

The other type is the HK wing camera which is comparable in price to the 808. At those prices you can buy 5 or more for the cost of one GoPro 2.
Old Jul 06, 2012, 11:03 AM
Eagle202 is offline
Find More Posts by Eagle202
Registered User
Eagle202's Avatar
Quote:
Originally Posted by Javatango View Post
My set up is very similar. I use Dual Lock type velcro on the nose of the plane to secure the keychain camera. Only problem is that I get a the "jello effect" whenever the motor is running.
You can try a rubber band but I would say you have some type of vibration. It might be an unbalance prop.

I get no jello effect and it is mostly held on by the Velcro. The yellow plastic wire and snap swivel are there in case the cam gets pulled off. It will come down with the plane instead of where it came loose.
Old Jul 06, 2012, 03:07 PM
Javatango is offline
Find More Posts by Javatango
Registered User
Quote:
Originally Posted by sammyc View Post
Balance it better, or maybe even balance your spinner, or check motor shaft isn't bent.
I know the velcro leaves some give, isn't a rigid mount. but, to get wobbly video, there has to be vibes coming from somewhere.
Think about it, if there are no vibes, whats making the camera 'float' about on the 'non rigid mount', causing jello?
Sound like I have some work to do. Thanks for the tips everyone.
Old Jul 06, 2012, 09:45 PM
Maddmax is offline
Find More Posts by Maddmax
Registered User
For thos eof you that saw my plane crash into the river a few weeks ago, I managed to get it rebuilt with a new set of wings and all new servos today. Took it out about an hour ago for a test flight and she flies better than ever. This plane is so stable and tight. Just love flying this one. Heading out in the morning to try and get some hot air ballon pics from this plane.
Old Jul 06, 2012, 10:29 PM
Eagle202 is offline
Find More Posts by Eagle202
Registered User
Eagle202's Avatar
Quote:
Originally Posted by Maddmax View Post
For thos eof you that saw my plane crash into the river a few weeks ago, I managed to get it rebuilt with a new set of wings and all new servos today. Took it out about an hour ago for a test flight and she flies better than ever. This plane is so stable and tight. Just love flying this one. Heading out in the morning to try and get some hot air ballon pics from this plane.
Have fun. Stay away from the Hudson!!!
Old Jul 07, 2012, 04:15 AM
Wiciman is offline
Find More Posts by Wiciman
Registered User

Swapping faulty Skysurfer servo - help!!!


Proud owner of spanking new SS v1. Have made most of the upgrades suggested in this post.

Now to the sorry bits:
My fuselage elevator servo died on maiden flight after approx. 5 mins of joy. Have ordered replacement.

I supect I have to pry the stock servo out somehow. Are they super glued in?

Can anyone please help with a step-by-step tutorial on how to swap the damaged one for my new one. Pictures would help (I am a ). All the best// Wiciman


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Sky Surfer or HK Bixler??? fpsazerbaijan Electric Plane Talk 11 Mar 17, 2012 06:43 AM
Sold 1800kv Motor/prop for Sky Surfer / Bixler / Easy Star tdab Aircraft - Electric - Power Systems (FS/W) 1 Nov 01, 2011 05:46 PM
Sold Bixler Sky Surfer Hawk Sky ARF or complete kit porcia83 Aircraft - Electric - Airplanes (FS/W) 1 Sep 14, 2011 10:24 AM
Discussion Review of my Sky Surfer AKA Bixler , Flew Today for the first time. dllhg Electric Plane Talk 19 Aug 10, 2011 11:41 AM
Discussion Propeller recommendations Bixler/ sky surfer sean11 Power Systems 3 Jun 25, 2011 07:08 AM