Lumenier RB2205C-12 2400KV SKITZO Ceramic Bearing Motor
Thread Tools
Old Oct 09, 2012, 09:22 PM
SteveT. is online now
Find More Posts by SteveT.
I fly, therefore, I crash!!!
SteveT.'s Avatar
Thanks my friend....can't wait!!

SteveT
RCG Plus Member
Latest blog entry: My hangar...
Sign up now
to remove ads between posts
Old Oct 09, 2012, 09:27 PM
FIXXIN2FLY is offline
Find More Posts by FIXXIN2FLY
FLY ANGRY
FIXXIN2FLY's Avatar
Quote:
Originally Posted by SteveT. View Post
Thanks my friend....can't wait!!

SteveT
I understand....In the last three days I built the 48 SHP, the lil super vyper, and two indoor floaters. Im tired but Im on a roll!!!!
I get almost as excited to maiden the 48ish planes as I do the bigguns.
Old Oct 09, 2012, 09:44 PM
SteveT. is online now
Find More Posts by SteveT.
I fly, therefore, I crash!!!
SteveT.'s Avatar
Yeah, I also have a brand new 70" Velox ready to go too...so "might" maiden both tomorrow...

SteveT
RCG Plus Member
Latest blog entry: My hangar...
Old Oct 09, 2012, 10:00 PM
FIXXIN2FLY is offline
Find More Posts by FIXXIN2FLY
FLY ANGRY
FIXXIN2FLY's Avatar
Quote:
Originally Posted by stevet. View Post
yeah, i also have a brand new 70" velox ready to go too...so "might" maiden both tomorrow... :d

stevet
oh happy day!!!!
Old Oct 09, 2012, 10:01 PM
FIXXIN2FLY is offline
Find More Posts by FIXXIN2FLY
FLY ANGRY
FIXXIN2FLY's Avatar
The Velox is the one I DONT have yet. Gotta gimme a report.

My 70 Fantasy AJ has 3 flights on it now and it is DIALED!!!! Man that thing rocks
Old Oct 09, 2012, 10:18 PM
SteveT. is online now
Find More Posts by SteveT.
I fly, therefore, I crash!!!
SteveT.'s Avatar
Quote:
Originally Posted by FIXXIN2FLY View Post
The Velox is the one I DONT have yet. Gotta gimme a report.

My 70 Fantasy AJ has 3 flights on it now and it is DIALED!!!! Man that thing rocks
Yes they do!! So does the 71".... I loved the look of my red bull one, but I was having a hard time seeing it in some attitudes. The orange 71" is much easier for me to see...

SteveT
RCG Plus Member
Latest blog entry: My hangar...
Old Oct 10, 2012, 08:07 AM
lb.man is offline
Find More Posts by lb.man
KBDD TEAM PILOT
lb.man's Avatar
Quote:
Originally Posted by SteveT. View Post
Finally!!!! My Edge is ready for maiden tomorrow!! Had to buy new batteries as the ones I had (4000mAH packs) had puffed, and, I also needed more weight in the nose, so, went with new 4S 45C 4400mAH Thunder Power packs. And.... I ran up the motor today for the first time. On 8S with a Hacker A60-5S (295KV), I got 2335 watts @ 79.35 amps, using a Xoar 20X10 Carbon fiber wide "gas" prop. Some might think this low on wattage, but this is a 28 pole motor, and you can't compare input watts of a 28 pole motor to those of a 14 pole motor such as an A50-14L or a Motrolfly motor. While I didn't check the thrust with a fish scale or anything, but I can tell you, when I had the stab pulling against the back of my ankles, it hurt, and I haven't even set my ESC yet!!!

SteveT
congratulations steve, with my electric setup motrolfly 5320 on 8s, I ended up using a 2s lipo battery for the rx, and was able to get it to balance from 4.5-5.5 without the 2nd battery i was left with a forward cog of 5 3/8. have fun
Old Oct 10, 2012, 09:42 AM
robj is offline
Find More Posts by robj
Registered User
robj's Avatar
Quote:
Originally Posted by SteveT. View Post
Yeah, I also have a brand new 70" Velox ready to go too...so "might" maiden both tomorrow...

SteveT
better check that weather, might be to hot...or to cold...or to windy.

Actually today looks nice, 10mph wind not a problem. Really like that yellow velox.
Old Oct 10, 2012, 12:03 PM
Buzzed is offline
Find More Posts by Buzzed
3D Sunset Flier
Buzzed's Avatar
Quote:
Originally Posted by SteveT. View Post
Yeah, I also have a brand new 70" Velox ready to go too...so "might" maiden both tomorrow...

SteveT
Whoa! Sounds like a fun day.

We need pics of these birds too...

Old Oct 10, 2012, 12:59 PM
bradhoke08 is offline
Find More Posts by bradhoke08
Old Dog learning new tricks~~
bradhoke08's Avatar
Quote:
Originally Posted by SteveT. View Post
Finally!!!! My Edge is ready for maiden tomorrow!! Had to buy new batteries as the ones I had (4000mAH packs) had puffed, and, I also needed more weight in the nose, so, went with new 4S 45C 4400mAH Thunder Power packs. And.... I ran up the motor today for the first time. On 8S with a Hacker A60-5S (295KV), I got 2335 watts @ 79.35 amps, using a Xoar 20X10 Carbon fiber wide "gas" prop. Some might think this low on wattage, but this is a 28 pole motor, and you can't compare input watts of a 28 pole motor to those of a 14 pole motor such as an A50-14L or a Motrolfly motor. While I didn't check the thrust with a fish scale or anything, but I can tell you, when I had the stab pulling against the back of my ankles, it hurt, and I haven't even set my ESC yet!!!

SteveT
Good Luck Steve, your going to love it~!! Can't wait to see what you think of the plane!!
Old Oct 10, 2012, 05:05 PM
SteveT. is online now
Find More Posts by SteveT.
I fly, therefore, I crash!!!
SteveT.'s Avatar
Well....left the house, with the weather station at our field saying zero-zero....(zero wind, zero gusts), got to the field, and it was getting windy with a 45 degree wind off my left shoulder... Flew my 57" Extra first as a warm up, and by the time I landed it was blowing much harder, but was bound and determined to maiden the Edge......so I did!! (@ RobJ.... ).....one word....NICE!!!!!! Didn't fly it long as the wind was still picking up, but CG was pretty much perfect with the packs against the firewall, just slight drop on the nose inverted, took one click of up trim, one left aileron, and flew great!!

And report on the Hacker A60-5S.... Outstanding from what I can see!! as noted yesterday....2335 watts (Which Kyle at Aero-Model says is actually low, and so could be pushed much harder as the motor is rated for 3000 watts peak), at 79.35 amps, using a Xoar 20X10 carbon fiber "wide" gas prop....didn't get a chance to try a hover, but it had schnitt loads of power on take off and up-lines, so, I think it will be perfect for my style of flying!!

Didn't maiden the Velox.....thought I'd save that for next time, as I want to set the ESC up first....which as noted I need to do on the Edge...

SteveT
RCG Plus Member
Last edited by SteveT.; Oct 10, 2012 at 05:19 PM.
Old Oct 10, 2012, 05:51 PM
jsmith285 is offline
Find More Posts by jsmith285
Registered User
jsmith285's Avatar
Schnitt

1 German
1.1 Etymology
1.2 Noun

Old High German snit
Noun
Schnitt m (genitive Schnitts or Schnittes, plural Schnitte)

cut
(=Kerbe) notch, nick, (Med) incision, cut
[+von Heu, Getreide] crop
Blumen für den Schnitt flowers pl (suitable) for cutting
b (=Haarschnitt) (hair)cut
einen kurzen Schnitt bitte cut it short please
c (Sew) cut
(=Schnittmuster) pattern
d (=Form) [+von Edelstein] cut
[+von Gesicht, Augen] shape
[+von Profil] line
e (Film) editing no pl
der Film ist jetzt beim Schnitt the film is now being edited or cut
schnelle Schnitte quick cutting
Schnitt: L. Schwarz editor - L. Schwarz
f (Math) (=Schnittpunkt) (point of) intersection
(=Schnittfläche) section
inf (=Durchschnitt) average
im Schnitt on average
unter/über dem Schnitt below/above average
g (=Längsschnitt, Querschnitt) section
im Schnitt gezeichnet drawn in section
h inf (=Gewinn) profit
i (Typ) (=das Beschneiden) cut
(=Buchrand) (trimmed) edge
dann kommt das gebundene Buch zum Schnitt then the bound book is cut or trimmed
j (Hort) [+von Bäumen etc] cutting no indef art
Old Oct 10, 2012, 05:54 PM
jsmith285 is offline
Find More Posts by jsmith285
Registered User
jsmith285's Avatar
O heck and after all that I still don't know what "Schnitt" means
Old Oct 10, 2012, 06:00 PM
SteveT. is online now
Find More Posts by SteveT.
I fly, therefore, I crash!!!
SteveT.'s Avatar
Quote:
Originally Posted by jsmith285 View Post
O heck and after all that I still don't know what "Schnitt" means
Was being polite, but was referring to the plane having a sh** load of power....

SteveT
RCG Plus Member
Latest blog entry: My hangar...
Old Oct 10, 2012, 09:35 PM
lb.man is offline
Find More Posts by lb.man
KBDD TEAM PILOT
lb.man's Avatar
Quote:
Originally Posted by jsmith285 View Post
O heck and after all that I still don't know what "Schnitt" means
+1


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion 60 inch edge 540 vs 48 inch extreme flight extra 300 & edge 540 vs 3dhs slick 51 & 59 CRFan1 3D Flying 40 Mar 04, 2012 03:45 PM
Sold 3DHS 41" Edge 540 PNP $225 gonzoman5 Aircraft - Electric - Airplanes (FS/W) 10 Oct 05, 2011 11:53 AM
Wanted 3dhs Edge 540 47" (red bull scheme) SmokeDogg Aircraft - Electric - Airplanes (FS/W) 13 Sep 29, 2011 03:19 PM
Wanted 3DHS Edge 540 47" (Red Bull Scheme) SmokeDogg Aircraft - Electric - Airplanes (FS/W) 0 Sep 24, 2011 02:58 AM
Wanted 3dhs edge 540 47" (red bull scheme) vhuang168 Aircraft - Electric - Airplanes (FS/W) 2 Sep 08, 2011 11:13 PM