Thread Tools
Old Apr 15, 2012, 10:15 AM
-= GYRO =- is offline
Find More Posts by -= GYRO =-
RC Pilot / Photographer
-= GYRO =-'s Avatar
for the Align DS610/Savox 1258tg users, will these servo arms fit? I think Robj told me these servos use Futaba arms?
http://www.amainhobbies.com/product_...rce=google_ext
Sign up now
to remove ads between posts
Old Apr 15, 2012, 10:37 AM
lugnutz is offline
Find More Posts by lugnutz
The Twisted Elf
lugnutz's Avatar
hey Gyro yes those arms will work on the align servos,yes they use the same spline as Futaba
Old Apr 15, 2012, 03:47 PM
SteveT. is online now
Find More Posts by SteveT.
I fly, therefore, I crash!!!
SteveT.'s Avatar
Quote:
Originally Posted by -= GYRO =- View Post
for the Align DS610/Savox 1258tg users, will these servo arms fit? I think Robj told me these servos use Futaba arms?
http://www.amainhobbies.com/product_...rce=google_ext
So will these Secraft or Spot-on arms from Aztech Aeromodel...

SteveT
RCG Plus Member
Latest blog entry: My hangar...
Old Apr 15, 2012, 03:47 PM
RC4x4 is offline
Find More Posts by RC4x4
Fly Low or you'll never know!
RC4x4's Avatar
Quote:
Originally Posted by aerosheldon View Post
I have to resist the urge to get the DA35 when it comes out and replacing my motrofly…. maybe not
I know. Looks like I may have to sell the DLE30 now and do a DA35 in my 330sc.



Cory
Old Apr 15, 2012, 05:11 PM
-= GYRO =- is offline
Find More Posts by -= GYRO =-
RC Pilot / Photographer
-= GYRO =-'s Avatar
Quote:
Originally Posted by SteveTtoooo View Post
So will these Secraft or Spot-on arms from Aztech Aeromodel...

SteveT
Thanks Steve... didn't want to get metal ones :-)
Old Apr 15, 2012, 05:47 PM
SteveT. is online now
Find More Posts by SteveT.
I fly, therefore, I crash!!!
SteveT.'s Avatar
Quote:
Originally Posted by -= GYRO =- View Post
Thanks Steve... didn't want to get metal ones :-)
Hotay.... just thought I would throw them out there...

SteveT
RCG Plus Member
Latest blog entry: My hangar...
Old Apr 15, 2012, 06:03 PM
PinkYakRC is offline
Find More Posts by PinkYakRC
Yeeah buddy!
PinkYakRC's Avatar
Its red.

Last edited by PinkYakRC; Apr 15, 2012 at 06:48 PM.
Old Apr 15, 2012, 07:26 PM
PinkYakRC is offline
Find More Posts by PinkYakRC
Yeeah buddy!
PinkYakRC's Avatar
I am getting close to being ready to get some graphics for it. Just need a little more red.
Old Apr 15, 2012, 11:44 PM
Cleared2Engage is offline
Find More Posts by Cleared2Engage
Happiness is a belt fed weapon
Cleared2Engage's Avatar
Quote:
Originally Posted by SteveTtoooo View Post
By all means.... I'll PM you my tele numbers....

SteveT
Thanks Steve, I'll give you a buzz a few days before I head out there.
Rob
Old Apr 16, 2012, 11:36 AM
lammbn is offline
Find More Posts by lammbn
Hooked on 3DHS
lammbn's Avatar
Quote:
Originally Posted by -= GYRO =- View Post
Thanks Steve... didn't want to get metal ones :-)
well just to let you know in advance. if your running those DS610's you got on the rudder for the 74 the double arms are not long enough in the dubro set. you will need a 3" aluminum arm either way. i have a SWB in my 71 and a spot on in my 74. i like the spot on arm better.
Old Apr 16, 2012, 11:39 AM
-= GYRO =- is offline
Find More Posts by -= GYRO =-
RC Pilot / Photographer
-= GYRO =-'s Avatar
Quote:
Originally Posted by lammbn View Post
well just to let you know in advance. if your running those DS610's you got on the rudder for the 74 the double arms are not long enough in the dubro set. you will need a 3" aluminum arm either way. i have a SWB in my 71 and a spot on in my 74. i like the spot on arm better.
Thanks for the heads up Brady
Old Apr 16, 2012, 11:46 AM
G.P. is online now
Find More Posts by G.P.
iumop ap!sdn w,I
G.P.'s Avatar
Running Align 610's on my Edge. With a 2.5" arm on the rudder I was able to adjust the end points in my Aurora to get enough throw. My rudder comes less than a 1/4 inch away from hitting the elevator.

Using the smallest arm possible and maxing out end points will give more mechanical advatage to your servo, if you care about that.
Old Apr 16, 2012, 12:02 PM
lammbn is offline
Find More Posts by lammbn
Hooked on 3DHS
lammbn's Avatar
I couldnt get it to get enough throw on my 71 with the dubro arms. had to go with a 3" aluminum and use the second hole in from the outside. I didn't even try to use them on the 74. i just bought all aluminum arms to bling it out.
Old Apr 16, 2012, 01:08 PM
robj is offline
Find More Posts by robj
Registered User
robj's Avatar
Quote:
Originally Posted by lammbn View Post
i couldnt get it to get enough throw on my 71 with the dubro arms. Had to go with a 3" aluminum and use the second hole in from the outside. I didn't even try to use them on the 74. I just bought all aluminum arms to bling it out.
+1..
Old Apr 16, 2012, 02:10 PM
G.P. is online now
Find More Posts by G.P.
iumop ap!sdn w,I
G.P.'s Avatar
I have no idea what the length of the Dubro arm is because I went with aluminum arms as well. Like I said, a 2.5" worked for me though. I wouldn't go out and buy another until you try a 2.5" if you happen to have one kicking around. If you have to buy one anyways, might as well go longer and have more hole options.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion 60 inch edge 540 vs 48 inch extreme flight extra 300 & edge 540 vs 3dhs slick 51 & 59 CRFan1 3D Flying 40 Mar 04, 2012 03:45 PM
Sold 3DHS 41" Edge 540 PNP $225 gonzoman5 Aircraft - Electric - Airplanes (FS/W) 10 Oct 05, 2011 11:53 AM
Wanted 3dhs Edge 540 47" (red bull scheme) SmokeDogg Aircraft - Electric - Airplanes (FS/W) 13 Sep 29, 2011 03:19 PM
Wanted 3DHS Edge 540 47" (Red Bull Scheme) SmokeDogg Aircraft - Electric - Airplanes (FS/W) 0 Sep 24, 2011 02:58 AM
Wanted 3dhs edge 540 47" (red bull scheme) vhuang168 Aircraft - Electric - Airplanes (FS/W) 2 Sep 08, 2011 11:13 PM