Thread Tools
Oct 20, 2012, 10:09 PM
Registered User
Stratos268's Avatar
I have a 71 gas slick and am considering selling it to a friend. Does the Edge fly as good as or better than the slick? Is it as floaty as the slick? Can someone compare the 2 different abilities of each plane?

Thanks

Eric
Sign up now
to remove ads between posts
Oct 20, 2012, 10:34 PM
disabled and broke
FIXXIN2FLY's Avatar
Quote:
Originally Posted by Stratos268
I have a 71 gas slick and am considering selling it to a friend. Does the Edge fly as good as or better than the slick? Is it as floaty as the slick? Can someone compare the 2 different abilities of each plane?

Thanks

Eric
Yes I have the 74 edge and the 70 slick. Love them both. My answer to you would be as good / not necessarily better. Apples and oranges but both delicious. Floaty? Beyond your wildest dreams. Does not want to land is a better assessment. It BEGS to be harriered. I will say that the slick seems to tumble with a bit more authority but the 74 Edge will not disappoint either. This is a trick question as to which one is better because there is no wrong decision.. Sleep well on that!!!
Oct 22, 2012, 07:12 AM
Custom Crasher
lowkeylaidback's Avatar

Wanted 3dhobbyshop 48" EPP Extra 330 Starboard main wing


Each post of this request was meant to target buyers of models from 3DHS that may like most have more then one model from that vendor as many here and do not use the classified adds this seem to be the only way to reach the buyers of this brand. A little dog not mine ruined my wing and I have not gotten a response from 3DHS since 10/9 about getting a new wing, as the wing is the only part that is damaged I am searching for a replacement
I need the starboard main wing for a 3dhobbyshop 48" EPP Extra 330, if you have one I am in the market, please send me a PM
Last edited by lowkeylaidback; Oct 22, 2012 at 10:22 AM.
Oct 22, 2012, 08:18 AM
Old Dog learning new tricks~~
bradhoke08's Avatar
Quote:
Originally Posted by lowkeylaidback
I need the starboard main wing for a 3dhobbyshop 48" EPP Extra 330, if you have one I am in the market, please send me a PM
Wrong thead dude This is the 74 Edge thead
Oct 22, 2012, 08:21 AM
Custom Crasher
lowkeylaidback's Avatar
I am hoping that someone has one that is wrecked with a good wing that I can pick up
Oct 22, 2012, 10:15 AM
Team Hillbilly 🐘💨
bullittjeff's Avatar
From sunday. Mine is the silver scheme and Ronbo is the red.
Oct 22, 2012, 10:57 AM
3D Sunset Flier
Buzzed's Avatar
Quote:
Originally Posted by bullittjeff
From sunday. Mine is the silver scheme and Ronbo is the red.
Those are some great shots of the Edge!



Thanks for sharing.
Oct 22, 2012, 11:04 AM
OOPS
Manta1's Avatar
Quote:
Originally Posted by bullittjeff
from sunday. Mine is the silver scheme and ronbo is the red.
awesome!
Oct 23, 2012, 07:42 AM
KBDD TEAM PILOT
lb.man's Avatar
1 gallon of break in mix run thru a new gt 33 cant wait to try a new prop next weekend. 18x8 is great for all around fun, hucking and sport flying. But i think this engine is quite capable of so much more. Next up Xoar 19x8. Trying to acquire a falcon 18.5x6w. ? how to check engine temps after 5min. flight, with no gauge? I think it has adequate ventilation.
74" edge, breaking in a gt33 (5 min 44 sec)
Oct 23, 2012, 08:25 AM
Team 3DHS / Team JR
Bivens's Avatar
If it's running well, then the temp is OK. If it were hot, it will lean out and die on a long up-line.

Nice to know it's running well. As for the 18.5x6W prop....I've got one backordered with Bob's Hobby Ctr. in Orlando....I believe it's not a common size and it may be a while before I get mine....if you want one, go ahead and get them to backorder you one so you're on the list when they get here...I love mine so much I wanted a spare.
Oct 23, 2012, 08:50 AM
KBDD TEAM PILOT
lb.man's Avatar
thanks bivens, i will back order a couple, to try out. for some strange reason i want to try a 20x4wide or a 20x6wide but am having trouble finding them
Oct 23, 2012, 12:46 PM
Registered User
racerman27410's Avatar
Quote:
Originally Posted by lb.man
1 gallon of break in mix run thru a new gt 33 cant wait to try a new prop next weekend. 18x8 is great for all around fun, hucking and sport flying. But i think this engine is quite capable of so much more. Next up Xoar 19x8. Trying to acquire a falcon 18.5x6w. ? how to check engine temps after 5min. flight, with no gauge? I think it has adequate ventilation.
http://www.youtube.com/watch?v=OlzgfbdIOgc&feature=plcp

Dont forget to check the 4 bolts holding the OS's backplate on.... my brothers had all 4 bolts loosen and let the front of the engine pull over the sealing o ring .... instant flameout. (he got the plane down safely)

Mine were still tight but i took them out and threadlocked them anyway.
Oct 23, 2012, 02:54 PM
I fly, therefore, I crash!!!
SteveT.'s Avatar
Quote:
Originally Posted by lb.man
1 gallon of break in mix run thru a new gt 33 cant wait to try a new prop next weekend. 18x8 is great for all around fun, hucking and sport flying. But i think this engine is quite capable of so much more. Next up Xoar 19x8. Trying to acquire a falcon 18.5x6w. ? how to check engine temps after 5min. flight, with no gauge? I think it has adequate ventilation.
http://www.youtube.com/watch?v=OlzgfbdIOgc&feature=plcp
The Duratrax Infrared thermometer is inexpensive and works well....

SteveT
Latest blog entry: My hangar...
Oct 23, 2012, 09:08 PM
KBDD TEAM PILOT
lb.man's Avatar
good to know, i did not even think to check those. thanks
Oct 23, 2012, 09:16 PM
Registered User
racerman27410's Avatar
Quote:
Originally Posted by lb.man
good to know, i did not even think to check those. thanks
mine were still tight but they didnt show any signs of having threadlock on them....a little threadlock= some peace of mind


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion 60 inch edge 540 vs 48 inch extreme flight extra 300 & edge 540 vs 3dhs slick 51 & 59 CRFan1 3D Flying 40 Mar 04, 2012 02:45 PM
Sold 3DHS 41" Edge 540 PNP $225 gonzoman5 Aircraft - Electric - Airplanes (FS/W) 10 Oct 05, 2011 10:53 AM
Wanted 3dhs Edge 540 47" (red bull scheme) SmokeDogg Aircraft - Electric - Airplanes (FS/W) 13 Sep 29, 2011 02:19 PM
Wanted 3DHS Edge 540 47" (Red Bull Scheme) SmokeDogg Aircraft - Electric - Airplanes (FS/W) 0 Sep 24, 2011 01:58 AM
Wanted 3dhs edge 540 47" (red bull scheme) vhuang168 Aircraft - Electric - Airplanes (FS/W) 2 Sep 08, 2011 10:13 PM