3DHS 74" Edge 540 - Page 231 - RC Groups
Thread Tools
Apr 15, 2012, 10:15 AM
RC Pilot / Photographer
-= GYRO =-'s Avatar
for the Align DS610/Savox 1258tg users, will these servo arms fit? I think Robj told me these servos use Futaba arms?
http://www.amainhobbies.com/product_...rce=google_ext
Sign up now
to remove ads between posts
Apr 15, 2012, 10:37 AM
The Twisted Elf
lugnutz's Avatar
hey Gyro yes those arms will work on the align servos,yes they use the same spline as Futaba
Apr 15, 2012, 03:47 PM
I fly, therefore, I crash!!!
SteveT.'s Avatar
Quote:
Originally Posted by -= GYRO =-
for the Align DS610/Savox 1258tg users, will these servo arms fit? I think Robj told me these servos use Futaba arms?
http://www.amainhobbies.com/product_...rce=google_ext
So will these Secraft or Spot-on arms from Aztech Aeromodel...

SteveT
Latest blog entry: My hangar...
Apr 15, 2012, 03:47 PM
Fly Low or you'll never know!
RC4x4's Avatar
Quote:
Originally Posted by aerosheldon
I have to resist the urge to get the DA35 when it comes out and replacing my motrofly…. maybe not
I know. Looks like I may have to sell the DLE30 now and do a DA35 in my 330sc.



Cory
Apr 15, 2012, 05:11 PM
RC Pilot / Photographer
-= GYRO =-'s Avatar
Quote:
Originally Posted by SteveTtoooo
So will these Secraft or Spot-on arms from Aztech Aeromodel...

SteveT
Thanks Steve... didn't want to get metal ones :-)
Apr 15, 2012, 05:47 PM
I fly, therefore, I crash!!!
SteveT.'s Avatar
Quote:
Originally Posted by -= GYRO =-
Thanks Steve... didn't want to get metal ones :-)
Hotay.... just thought I would throw them out there...

SteveT
Latest blog entry: My hangar...
Apr 15, 2012, 06:03 PM
Yeeah buddy!
PinkYakRC's Avatar
Its red.

Last edited by PinkYakRC; Apr 15, 2012 at 06:48 PM.
Apr 15, 2012, 07:26 PM
Yeeah buddy!
PinkYakRC's Avatar
I am getting close to being ready to get some graphics for it. Just need a little more red.
Apr 15, 2012, 11:44 PM
Happiness is a belt fed weapon
Cleared2Engage's Avatar
Quote:
Originally Posted by SteveTtoooo
By all means.... I'll PM you my tele numbers....

SteveT
Thanks Steve, I'll give you a buzz a few days before I head out there.
Rob
Apr 16, 2012, 11:36 AM
Hooked on 3DHS
lammbn's Avatar
Quote:
Originally Posted by -= GYRO =-
Thanks Steve... didn't want to get metal ones :-)
well just to let you know in advance. if your running those DS610's you got on the rudder for the 74 the double arms are not long enough in the dubro set. you will need a 3" aluminum arm either way. i have a SWB in my 71 and a spot on in my 74. i like the spot on arm better.
Apr 16, 2012, 11:39 AM
RC Pilot / Photographer
-= GYRO =-'s Avatar
Quote:
Originally Posted by lammbn
well just to let you know in advance. if your running those DS610's you got on the rudder for the 74 the double arms are not long enough in the dubro set. you will need a 3" aluminum arm either way. i have a SWB in my 71 and a spot on in my 74. i like the spot on arm better.
Thanks for the heads up Brady
Apr 16, 2012, 11:46 AM
iumop ap!sdn w,I
G.P.'s Avatar
Running Align 610's on my Edge. With a 2.5" arm on the rudder I was able to adjust the end points in my Aurora to get enough throw. My rudder comes less than a 1/4 inch away from hitting the elevator.

Using the smallest arm possible and maxing out end points will give more mechanical advatage to your servo, if you care about that.
Apr 16, 2012, 12:02 PM
Hooked on 3DHS
lammbn's Avatar
I couldnt get it to get enough throw on my 71 with the dubro arms. had to go with a 3" aluminum and use the second hole in from the outside. I didn't even try to use them on the 74. i just bought all aluminum arms to bling it out.
Apr 16, 2012, 01:08 PM
Registered User
robj's Avatar
Quote:
Originally Posted by lammbn
i couldnt get it to get enough throw on my 71 with the dubro arms. Had to go with a 3" aluminum and use the second hole in from the outside. I didn't even try to use them on the 74. I just bought all aluminum arms to bling it out.
+1..
Apr 16, 2012, 02:10 PM
iumop ap!sdn w,I
G.P.'s Avatar
I have no idea what the length of the Dubro arm is because I went with aluminum arms as well. Like I said, a 2.5" worked for me though. I wouldn't go out and buy another until you try a 2.5" if you happen to have one kicking around. If you have to buy one anyways, might as well go longer and have more hole options.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion 60 inch edge 540 vs 48 inch extreme flight extra 300 & edge 540 vs 3dhs slick 51 & 59 CRFan1 3D Flying 40 Mar 04, 2012 03:45 PM
Sold 3DHS 41" Edge 540 PNP $225 gonzoman5 Aircraft - Electric - Airplanes (FS/W) 10 Oct 05, 2011 11:53 AM
Wanted 3dhs Edge 540 47" (red bull scheme) SmokeDogg Aircraft - Electric - Airplanes (FS/W) 13 Sep 29, 2011 03:19 PM
Wanted 3DHS Edge 540 47" (Red Bull Scheme) SmokeDogg Aircraft - Electric - Airplanes (FS/W) 0 Sep 24, 2011 02:58 AM
Wanted 3dhs edge 540 47" (red bull scheme) vhuang168 Aircraft - Electric - Airplanes (FS/W) 2 Sep 08, 2011 11:13 PM