Thread Tools
Nov 16, 2011, 09:47 PM
3D Sunset Flier
Buzzed's Avatar
Bivens,

That thing is just beautiful! Does the graphics come with it? Vinyl?

Nice job on the maiden. Can't wait to see more on a sunny day.

-Buzzed

Sign up now
to remove ads between posts
Nov 16, 2011, 09:48 PM
Team 3DHS / Team JR
Bivens's Avatar
Yep...the graphics on the plane are FACTORY 3dhs bling....
Nov 16, 2011, 09:51 PM
3D Sunset Flier
Buzzed's Avatar
Quote:
Originally Posted by Bivens
Yep...the graphics on the plane are FACTORY 3dhs bling....
Suweet!

Nov 16, 2011, 11:45 PM
Fly Low or you'll never know!
RC4x4's Avatar
Mike, great job on getting the Edge done and in the air really fast. You weren't excited were ya. Great video as well.

Mine arrived today. Very sexy plane. Everything looks fantastic! I'll get started on it this weekend.


Cory
Last edited by RC4x4; Nov 16, 2011 at 11:51 PM.
Nov 17, 2011, 12:56 AM
I fly, therefore, I crash!!!
SteveT.'s Avatar
After looking at both, I don't know which one I like the best...the silver & red really looks sharp, but so does the red one....but considering my money recently went for an 89" Slick, my wife would kill me if I even suggested buying another plane right now, especially, since I have three NIB "kits' sitting there ready to build...

SteveT
Latest blog entry: My hangar...
Nov 17, 2011, 12:58 AM
I fly, therefore, I crash!!!
SteveT.'s Avatar
Quote:
Originally Posted by RC4x4
Mike, great job on getting the Edge done and in the air really fast. You weren't excited were ya. Great video as well.

Mine arrived today. Very sexy plane. Everything looks fantastic! I'll get started on it this weekend.


Cory
Are the trucks in the case RC?? And if so, do you also have the trailers to go with them?
Latest blog entry: My hangar...
Nov 17, 2011, 03:51 AM
Registered User
grubby's Avatar
I have 3 servos left to install and some programming!

Should be able to fly it friday.

Im running 8S 4400's with a Motrolfly 4325-310

Savox servos all around.
Nov 17, 2011, 08:00 AM
Registered User
robj's Avatar
Some pics of my build, there is a link on the web site to a manual but it doesn't seem to work. So I had to "wing it"(recalculating). But if you have built another 30cc 3DHS plane this one is the same. I still don't have everything locked down, I forgot my 3" rudder arm at home. E setup, 8s, a50-12l. I used the HK orange to test the motor direction. However every flight on my Extra has been with an orange rx. It now has a 6210 in it!

About the hardest thing was locating the cut outs for the control horns. Press, look for a demple, hope that's it. One thing I usually use the manual for is to get an idea of their location. I still haven't cut in the one for the elevator. It was getting late. This is about 4 hours of solid work. I'm sure yall will maiden way before mine with my schedule the next week, so good luck with yours!! Rob

So on to some pics...
Nov 17, 2011, 08:24 AM
How can we stop winter?
flyinhigh025's Avatar
Quote:
Originally Posted by grubby
I have 3 servos left to install and some programming!

Should be able to fly it friday.

Im running 8S 4400's with a Motrolfly 4325-310

Savox servos all around.
Nice Steve! Good speed building once again.

How about some video?!
Nov 17, 2011, 08:34 AM
doh!
ryan_m's Avatar
sexy. Makes me want to pull mine out of the box and start the build tonight! But I started on the 46" Yak, and I want to finish it first...
robj, please post up the weight of yours once you get it all together!
Nov 17, 2011, 08:36 AM
Registered User
robj's Avatar
Roger..
Nov 17, 2011, 08:50 AM
Registered User
SnowDog1974's Avatar
Quote:
Originally Posted by SteveTtoooo
After looking at both, I don't know which one I like the best...the silver & red really looks sharp, but so does the red one....but considering my money recently went for an 89" Slick, my wife would kill me if I even suggested buying another plane right now, especially, since I have three NIB "kits' sitting there ready to build...

SteveT
So send me the three NIB kits and then you will have an excuse to get a new one!
Nov 17, 2011, 09:05 AM
Registered User
DFflyer's Avatar
Quote:
Originally Posted by robj
Some pics of my build, there is a link on the web site to a manual but it doesn't seem to work. So I had to "wing it"(recalculating). But if you have built another 30cc 3DHS plane this one is the same. I still don't have everything locked down, I forgot my 3" rudder arm at home. E setup, 8s, a50-12l. I used the HK orange to test the motor direction. However every flight on my Extra has been with an orange rx. It now has a 6210 in it!

About the hardest thing was locating the cut outs for the control horns. Press, look for a demple, hope that's it. One thing I usually use the manual for is to get an idea of their location. I still haven't cut in the one for the elevator. It was getting late. This is about 4 hours of solid work. I'm sure yall will maiden way before mine with my schedule the next week, so good luck with yours!! Rob

So on to some pics...
Nice pics that scheme is awesome! I need to get some of those landing gear cuffs and see if they fit on the SC.
Nov 17, 2011, 09:12 AM
Registered User
robj's Avatar
Quote:
Originally Posted by DFflyer
Nice pics that scheme is awesome! I need to get some of those landing gear cuffs and see if they fit on the SC.
Those were another head scratcher, in the bag with the gear there were some small phillips screws and 4 black allen machine screws. There are holes in the CF gear to mount from the bottom. machine scres a no go so I used the phillips, little long and one slight poked through. Left the others a little lose. Never saw any other screws.

Wonder how Bevens did his?

CF gear on the SC is shaped a little different, but they look pretty universal if they will fit over the gear. Looks like fiberglass with rubber edges. They nicely hold on the gear cover plate. First time I've ever used that.
Nov 17, 2011, 09:23 AM
Fly Low or you'll never know!
RC4x4's Avatar
Quote:
Originally Posted by SteveTtoooo
Are the trucks in the case RC?? And if so, do you also have the trailers to go with them?

Yep! They are Tamiya tractor trucks. Have three trailer's to use with them.



Cory


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion 60 inch edge 540 vs 48 inch extreme flight extra 300 & edge 540 vs 3dhs slick 51 & 59 CRFan1 3D Flying 40 Mar 04, 2012 02:45 PM
Sold 3DHS 41" Edge 540 PNP $225 gonzoman5 Aircraft - Electric - Airplanes (FS/W) 10 Oct 05, 2011 10:53 AM
Wanted 3dhs Edge 540 47" (red bull scheme) SmokeDogg Aircraft - Electric - Airplanes (FS/W) 13 Sep 29, 2011 02:19 PM
Wanted 3DHS Edge 540 47" (Red Bull Scheme) SmokeDogg Aircraft - Electric - Airplanes (FS/W) 0 Sep 24, 2011 01:58 AM
Wanted 3dhs edge 540 47" (red bull scheme) vhuang168 Aircraft - Electric - Airplanes (FS/W) 2 Sep 08, 2011 10:13 PM