Shop our Airplanes Products Drone Products Sales
Thread Tools
Jan 19, 2012, 10:29 AM
Registered User
NeverEnough's Avatar
Quote:
Originally Posted by Buzzed
Thanks buddy! Can't wait to get you on the sticks of Yuri's 104. It will change your life...

I can't wait either
Sign up now
to remove ads between posts
Jan 19, 2012, 06:26 PM
Registered User
yankphan's Avatar
Ok so i finally figured it out ! Your not going to believe this one...
The trimming issue... So i balance it out at approx. 5 1-4"... I take her up and get it tracking pretty good other than 2 clicks right rudder and 3 clicks up elevator.... Flew for about 2 minutes TAKING IT EASY.... On my maiden i went easy and started getting the itch to see what it can do....anyway, testing her out for 2-3 minutes and still straight as arrow. Poptops, walls... Snap rolls... And now she feels weird again ! Needed up elevator... Thinking my servo was not centering right like people were saying. I immediatley safely landed her. To find out the lipo was sitting about 2-3 inches from the wingtube with the velcro sitting on the side if the fuselage !!! Man did i get lucky.... I am convinced the factory velcro strap came loose on my maiden and the lipo moved without me noticing. Unreal... I installed REAL velcro straps and flew it like i stole it ! STRAIGHT AS AN ARROW. I want to thank everyone who helped out with this problem... Glad its over !
Jan 19, 2012, 06:44 PM
iumop ap!sdn w,I
G.P.'s Avatar
Did you put velcro on the battery tray as well as strapping the battery down? Planes of this size require both The velcro on the tray usually needs to be CA'd down I've found as well.
Jan 19, 2012, 07:01 PM
Registered User
yankphan's Avatar
Quote:
Originally Posted by G.P.
Did you put velcro on the battery tray as well as strapping the battery down? Planes of this size require both The velcro on the tray usually needs to be CA'd down I've found as well.
Yes i did... I dont know what came with yours but the velcro that came with mine seems like a type of 'plastic ?' I now use a real "fury " 3m velcro... no problems..
Last edited by yankphan; Jan 19, 2012 at 07:12 PM.
Jan 19, 2012, 07:13 PM
Registered User
yankphan's Avatar
I think Im going to invest in another set of lipos.... im using 4000mah on 8s.... should i go with 4400's or 5000's running 8s ?
Jan 19, 2012, 07:35 PM
ADC Vinyl
Fliprob17's Avatar
velcro on the battery tray, and two straps on each pack
Jan 19, 2012, 07:46 PM
iumop ap!sdn w,I
G.P.'s Avatar
Quote:
Originally Posted by yankphan
Yes i did... I dont know what came with yours but the velcro that came with mine seems like a type of 'plastic ?' I now use a real "fury " 3m velcro... no problems..
I use these: http://www.ebay.com/sch/bankonknab/m...84.m1439.l2654

and this: http://www.hobbyking.com/hobbyking/s...idProduct=9374
Jan 19, 2012, 09:06 PM
3D Sunset Flier
Buzzed's Avatar
Quote:
Originally Posted by yankphan
I think Im going to invest in another set of lipos.... im using 4000mah on 8s.... should i go with 4400's or 5000's running 8s ?
I would keep it light and go with the 4400's.

Jan 19, 2012, 10:33 PM
Team 3DHS / Team JR
Bivens's Avatar
Glad you got it figured out....sorry to mis-diagnose on the servo centering...but I still know why I personally use 7955's on mine....I never would've guessed your pack was sliding around......Lucky for you that you didn't get any really good blenders or pop-tops....right birk??

Now you can enjoy Yank.
Jan 19, 2012, 11:06 PM
Team Hillbilly
blaiss's Avatar
Quote:
Originally Posted by Buzzed
Thanks! The last photo was taken on program mode with the flash on. It lowers the shutter speed causing that blur effect. Just got lucky with that one.

-Buzzed
Hey Buzzed,

What camera/strobe setup are you using? Also, on that last shot, is that a front-sync or a rear-sync?
Jan 20, 2012, 06:27 AM
Registered User
yankphan's Avatar
haha... yeah practice Bivens !.... just happy I can fly the edge with no worries and move on to the next project !! giant scale hangar 9 p-47.
Jan 20, 2012, 06:29 AM
Registered User
yankphan's Avatar
Quote:
Originally Posted by Buzzed
I would keep it light and go with the 4400's.

I guess your right.... and it doesnt hurt to save a little change with the price difference !
Last edited by yankphan; Jan 20, 2012 at 06:36 AM.
Jan 20, 2012, 09:26 AM
3D Sunset Flier
Buzzed's Avatar
Quote:
Originally Posted by blaiss
Hey Buzzed,

What camera/strobe setup are you using? Also, on that last shot, is that a front-sync or a rear-sync?
It's just a simple program mode flash. No fanciness whatsoever. But it did turn out cool!

Last edited by Buzzed; Jan 20, 2012 at 01:02 PM.
Jan 20, 2012, 09:28 AM
3D Sunset Flier
Buzzed's Avatar
Quote:
Originally Posted by yankphan
I guess your right.... and it doesnt hurt to save a little change with the price difference !
I had a plane that flew two 5000mah packs once. It flew fast and flew forever, but it was heavy and wouldn't 3D well. So I sold it.

Jan 20, 2012, 11:37 AM
Registered User
robj's Avatar
Quote:
Originally Posted by Buzzed
I would keep it light and go with the 4400's.

Even lighter for me, 3000 -3800, 6 minutes, same in the slicks.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion 60 inch edge 540 vs 48 inch extreme flight extra 300 & edge 540 vs 3dhs slick 51 & 59 CRFan1 3D Flying 40 Mar 04, 2012 02:45 PM
Sold 3DHS 41" Edge 540 PNP $225 gonzoman5 Aircraft - Electric - Airplanes (FS/W) 10 Oct 05, 2011 10:53 AM
Wanted 3dhs Edge 540 47" (red bull scheme) SmokeDogg Aircraft - Electric - Airplanes (FS/W) 13 Sep 29, 2011 02:19 PM
Wanted 3DHS Edge 540 47" (Red Bull Scheme) SmokeDogg Aircraft - Electric - Airplanes (FS/W) 0 Sep 24, 2011 01:58 AM
Wanted 3dhs edge 540 47" (red bull scheme) vhuang168 Aircraft - Electric - Airplanes (FS/W) 2 Sep 08, 2011 10:13 PM