AQ50D PRO revision for Quad , Hexa and Okto - Page 42 - RC Groups
Thread Tools
Feb 24, 2012, 11:32 PM
Registered User
Another one ?
FPV dans le frontonnais (7 min 40 sec)
Sign up now
to remove ads between posts
Feb 27, 2012, 03:01 PM
Registered User
Hi all!!!

It is airborne!!

Videos soon!!
Feb 28, 2012, 05:11 PM
Registered User
lost the bookmark of the TMF page and even with Google don't find it again?

Can anybody help!


Feb 28, 2012, 05:20 PM
Registered User
Originally Posted by XtremeWingRC
I finaly found it some posts back - I was looking for this one:

But thx anyway!!

Btw. in fpv4ever shop Fabienne sells the boards with FW 1.5 ? can't find that anywhere? in his blog FW 1.42 2G is offered, at TMF they have TMF_Pro_0123(V1.4 6G).tmf and TMF_Pro_1206(6G).tmf - and here some people switch back to first version 2G - I'm confused

for a regular quad - what do you all recommend ? had no time to build mine yet and so no experience! - (would like to try navi-/sonarboard, when available.)

Thank you!!!

Last edited by Jan F.; Feb 28, 2012 at 05:43 PM.
Feb 28, 2012, 08:56 PM
It wasn't me
r0sewhite's Avatar
Jan, V1.2 is most likely the best choice. Since my update I have no serious drift problems. Only a slight drift after a strong temperature rise or fall (i.e. indoor +20C to outdoor -8C) that needs some recalibration. I never have to recalibrate after battery changes.
Feb 28, 2012, 09:18 PM
Registered User
Originally Posted by pietronet
Hi all!!!

It is airborne!!

Videos soon!!
Feb 29, 2012, 10:36 AM
Registered User
Hi, apparently the firmware 1.5 has arrived, if you look at the photo of the card

This is R20 and R19 that are deleted and remaining R21 and R22 !

Who knows where to find firmware 1.5?

Feb 29, 2012, 11:22 AM
Registered User
XtremeWingRC's Avatar
Does anybody know if the aq50d pro will work for mini quad frames, say 9 inches from motor to motor? I tried to use it on my blueskyrc mini quad an it went crazy everywhere.
Feb 29, 2012, 11:27 AM
Suspended Account
Originally Posted by XtremeWingRC
Does anybody know if the aq50d pro will work for mini quad frames, say 9 inches from motor to motor? I tried to use it on my blueskyrc mini quad an it went crazy everywhere.
Works fine on mini sized frames, including the Bluesky one. I've used it on a few. Did you adjust the gain down and make sure the DIPs are set properly and motors connected in right order?

TMF Pro MicroQuad (3 min 26 sec)

DiaLFonZo QuadMini (4 min 8 sec)
Feb 29, 2012, 04:15 PM
Sorry to make Mistake . Apologizes . Erratum the board are all in 1,42 2G revision .

The Firwmare 1.5 , will be for GPS revision ... so please wait a little ...

Enjoy your flight
Mar 01, 2012, 06:00 AM
Registered User
Hi guys as promised !

AQ50 pro Quad (1 min 32 sec)

Here is a little video, with a 808 #11 keychain, it has a few jello effect but it was just taped to the battery...

Does any of you have a special mount for this kind of cheap cam to avoid this?


Mar 01, 2012, 08:47 AM
Registered User
Rc Heli Halle's Avatar

New Video from Heidekultur

Hexakopter mit AQ50D Pro von TMF (5 min 15 sec)

Good Build and very Good Flight.

Mar 01, 2012, 12:00 PM
It started with a red biplane
tony3di's Avatar
Very nice Mike
Good looking Hexa. Very stable flight.
What are the specs ( weight, size, motors, props) ?
Is that a aluminium frame?
Mar 01, 2012, 12:24 PM
Registered User
Good job Mike, very stable yet it can move quickly when asked. This board is amazing, i have been flying Y6 lately, but decided i wanted to try a flat hexa too, but i don't like normal hexa because of orientation problems, so i made a V6.
This is my first flight.. no tinkering with settings... just set the board to X Hexa configuration and it flies great. Its not in the video, but later i even took off and landed successfully with 1 motor disconnected, only had problam with poor yaw authority.. but certain other boards can't even get off the ground with 5 motors

test#1_v6_fw1.5(2G).mp4 (3 min 16 sec)

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Poll What Motors do you use on your tri/quad/hexa/octal etc? bob4432 Multirotor Drone Talk 4 Aug 29, 2010 08:10 PM
Sold MicroKopter ARF Quad/Hexa G-unit Aircraft - Electric - Helis (FS/W) 3 Aug 23, 2010 10:38 AM
Discussion Folding frame for AP - tri, quad, Hexa, Okto danielpetrescu Multirotor Drone Talk 9 May 10, 2010 01:25 AM
Question Tri/hexa-copter or Quad/Octa-copter and Spartan AP2000i or Helicommand Arthur P. VTOLs 2 May 20, 2007 04:02 PM