Thread Tools
Nov 06, 2012, 04:10 PM
Aerial DP
Sign up now
to remove ads between posts
Nov 06, 2012, 09:30 PM
Aerial DP
what is a really fast miniZ setup motor/esc/prop? what servos are a bang for the buck special?
Nov 07, 2012, 09:00 AM
Some call me the other guy!
DoctorAudio's Avatar
How fast do ou want to go?
HS 65 MG are awesome!
But if your not going try to go slow!
I got a couple setups you can try!
Nov 07, 2012, 09:24 AM
Aerial DP
real fast like a hundred....... for a while would even better than short bursts. Don't mind spending some money, my first thought is an inrunner of some type but i still want to get some range out of it. It'll stricly be an fpv rig with all the recordings done at the ground station so it doesn't get too loaded down. Love those servos....

ideas?
Nov 07, 2012, 02:35 PM
never mind the boll⁣⁣⁣ocks
brosius85's Avatar
good micro setup= http://www.gobrushless.com/shop/inde...ef=MD2505-4800

APC 4.1 x 4.1E prop

http://www.gobrushless.com/shop/inde...f=DUALSKY3040A

add a strong 3s 1600 (maybe a little bigger im not sure what these take) and it should see 100mph no problem
Nov 07, 2012, 03:43 PM
Aerial DP
nice..... all the ratings on that motor are 2s,,,,, 3s is cool?

if theres a 4s-6s solution, i'd love to hear about it
Nov 07, 2012, 06:33 PM
Religion= suffering/wars
deTonaTor_NZ's Avatar
Thought I'd share some pics of my zeph II
Nov 07, 2012, 08:48 PM
never mind the boll⁣⁣⁣ocks
brosius85's Avatar
http://www.gobrushless.com/shop/inde...ef=MD2510-2700

(4s) MAS 5.5 x 4.5, 12.4V, 53A, 650W

that would be completely nuts

you may find you only have room in the micro for 2s or 3s anyways mate
Nov 07, 2012, 09:28 PM
Mum is the word!
Do you mean as far as motors go?
Quote:
Originally Posted by Kloner
nice..... all the ratings on that motor are 2s,,,,, 3s is cool?

if theres a 4s-6s solution, i'd love to hear about it
Nov 07, 2012, 10:56 PM
Aerial DP
yea, what do ya got in mind?
Nov 08, 2012, 01:27 AM
The way of being is doing.
IMEIV's Avatar
Quote:
Originally Posted by deTonaTor_NZ
Thought I'd share some pics of my zeph II
Are you sure that you can use RVOSD so turned ? You can use it only turned in the direction of the two arrows.
Nov 08, 2012, 08:53 AM
Mum is the word!
For the ZXL or the mini Z?
Quote:
Originally Posted by Kloner
yea, what do ya got in mind?
Nov 08, 2012, 09:06 AM
Some call me the other guy!
DoctorAudio's Avatar
he is talking mini
Nov 08, 2012, 09:53 AM
Mum is the word!
Here is a few motors that I just got, 3542 1200 is what I stock regularly. I just got a new batch of 1200 and 1400 kV 3542. I got a few of the 3542 900 and 800 kV to test. The 3 larger motors I am testing is a larger planes
Nov 08, 2012, 01:51 PM
The way of being is doing.
IMEIV's Avatar
Quote:
Originally Posted by klique
For the ZXL or the mini Z?
Klique.. when will you open a new thread for the ZXL ?


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Build Log Building the ultimate Ritewing Zephyr ThomasWF FPV Talk 34 Feb 20, 2012 05:14 PM
Discussion wing thickness ritewing zephyr Herishi The Builders Workshop 2 Oct 05, 2011 08:36 AM
Discussion Ritewing Zephyr hobbycity motor nexstarselect FPV Talk 2 Mar 07, 2011 04:37 PM