Official Eflite UMX Beast 3D - Page 112 - RC Groups
Shop our Airplanes Products Drone Products Sales
Thread Tools
Mar 12, 2012, 05:59 PM
LiPo-Sucker & Airframe EMT
pugsam's Avatar
Quote:
Originally Posted by BobaFett1138
That sounds like the end of EVERY flight of mine....... Ok, not quite, but yes, I do scare myself quite often. My beastie is gonna need some replacement wings pretty soon.....
LOL

I've replaced the B3D's wings, and done several rounds of various other repairs.



She don't pirouette quite so sweet anymore.........



So, while I still fly her (plus a bunch of other rescue birds), I daydream of the next generation of objects of desire -- which I hope will be appearing soon in our LHS!

Sign up now
to remove ads between posts
Mar 13, 2012, 08:28 AM
Parkzone junkie
kalmon's Avatar
Quote:
Originally Posted by pugsam
So, while I still fly her (plus a bunch of other rescue birds), I daydream of the next generation of objects of desire -- which I hope will be appearing soon in our LHS!

I can pick up a full scale p-51 in my LHS ?!?! SIGN ME UP!!

-Brian
Mar 13, 2012, 10:10 AM
Registered User

Which aileron servos for AS3X


For you guys who are putting your Beast AS3X bick in other planes, which aileron servos are you using?
Thanks
Swilson50
aka Stan in Dodge City
Mar 13, 2012, 10:35 AM
Too much to do not enough time
BobaFett1138's Avatar
Quote:
Originally Posted by Swilson50
For you guys who are putting your Beast AS3X bick in other planes, which aileron servos are you using?
Thanks
Swilson50
aka Stan in Dodge City
Think you have to use the beast servos, IE, 1.9 grams w/ball bearings.
http://www.spektrumrc.com/Products/D...d=SPMAS2000LBB


The 1.7grams should WORK, however, the reason that they put the 1.9's in the beast is because of the constant chattering. According to them, the regular servos would likely wear out quickly. Whether it's true or not... *shrugs* however, I'd get a pair of 1.9's to be safe.
Mar 13, 2012, 10:59 AM
Registered User
Quote:
Originally Posted by Swilson50
For you guys who are putting your Beast AS3X bick in other planes, which aileron servos are you using?
Thanks
Swilson50
aka Stan in Dodge City
Quote:
Originally Posted by BobaFett1138
Think you have to use the beast servos, IE, 1.9 grams w/ball bearings.
http://www.spektrumrc.com/Products/D...d=SPMAS2000LBB


The 1.7grams should WORK, however, the reason that they put the 1.9's in the beast is because of the constant chattering. According to them, the regular servos would likely wear out quickly. Whether it's true or not... *shrugs* however, I'd get a pair of 1.9's to be safe.
Yup... the HD servos went on the wings of my Sbach when the Beast 3D brick went in.
Mar 13, 2012, 11:08 AM
LiPo-Sucker & Airframe EMT
pugsam's Avatar

Beast 3D guts into UM Stryker?


I'd like to transfer my B3D brick, motor and servos into a more durable airframe.....the UM F-27Q Stryker.

There doesn't appear to be any report of anyone doing that, so far.

Would it work, since the Stryker has an elevon setup? (My TX is the DX6i.)

Anybody actually tried it?

Dave
Mar 13, 2012, 11:12 AM
Registered User
Quote:
Originally Posted by pugsam
I'd like to transfer my B3D brick, motor and servos into a more durable airframe.....the UM F-27Q Stryker.

There doesn't appear to be any report of anyone doing that, so far.

Would it work, since the Stryker has an elevon setup? (My TX is the DX6i.)

Anybody actually tried it?

Dave
1. You'd have to run each elevon on a separate channel and then the AS3X system would only work on one.
2. Does the DX6i have elevon mixing?
3. That brick may well not fit in the Stryker? It's pretty cramped.
Mar 13, 2012, 11:22 AM
LiPo-Sucker & Airframe EMT
pugsam's Avatar
Quote:
Originally Posted by erkq
1. You'd have to run each elevon on a separate channel and then the AS3X system would only work on one.
2. Does the DX6i have elevon mixing?
3. That brick may well not fit in the Stryker? It's pretty cramped.
Thanks, Erkq!

3. So I'd dig out a little foam... not a big deal?

2. I use my DX6i for my UM Stryker and its big brother, too. The elevons work just fine on the TX's wing/tail elevon mix.

1. This is the issue that's most mysterious to me. What does this mean, in practical "AS3X for Dummies" language? What flight controls would/could I have, either with regular functioning or with AS3X doing its thing as well?

Dave
Mar 13, 2012, 11:30 AM
Registered User
Quote:
Originally Posted by pugsam
Thanks, Erkq!

3. So I'd dig out a little foam... not a big deal?

2. I use my DX6i for my UM Stryker and its big brother, too. The elevons work just fine on the TX's wing/tail elevon mix.

1. This is the issue that's most mysterious to me. What does this mean, in practical "AS3X for Dummies" language? What flight controls would/could I have, either with regular functioning or with AS3X doing its thing as well?

Dave
On second thought, I don't think this would work at all. I put my AS3X board in an Sbach and it flies great! Try that, you won't be disappointed!

It won't work because the elevator gyro is connected to only one servo output at the receiver so there's nothing you can do with mixes for that. You need the elevator gyro to act on both elevons. Just think what would happen if only a single elevon were used to correct pitch!

The ailerons have a similar problem.
Mar 13, 2012, 11:45 AM
LiPo-Sucker & Airframe EMT
pugsam's Avatar
Quote:
Originally Posted by erkq
On second thought, I don't think this would work at all. I put my AS3X board in an Sbach and it flies great! Try that, you won't be disappointed!.....
Drat.

I'll ponder your Sbach suggestion.

/Waiting for the newest cool stuff (Carbon Cub, UM Spitfire, MiG-15, etc.) to arrive, and looking to try something interesting in the meantime..........

Mar 13, 2012, 11:49 AM
Registered User
Quote:
Originally Posted by pugsam
Drat.

I'll ponder your Sbach suggestion.

/Waiting for the newest cool stuff (Carbon Cub, UM Spitfire, MiG-15, etc.) to arrive, and looking to try something interesting in the meantime..........

IMHO, the FrankenBach is very interesting. I'd do that if I were you! I love it. Wait... did I already say that?
Mar 13, 2012, 11:56 AM
Gone Huckin'
turnerm's Avatar
Quote:
Originally Posted by erkq
IMHO, the FrankenBach is very interesting. I'd do that if I were you! I love it. Wait... did I already say that?
You may have done this already but I'd be curious to see a step by step tutorial on how you did this (at least the major steps... don't need details on the pushrod construction or stuff like that unless there's more to it than I think there is!).

Actually... I bet they'll be coming out with one soon. You think?
Mar 13, 2012, 11:58 AM
Gone Huckin'
turnerm's Avatar
Quote:
Originally Posted by erkq
IMHO, the FrankenBach is very interesting. I'd do that if I were you! I love it. Wait... did I already say that?
I'm also curious as to why you like the AS3X modded Sbach moreso than you do the 3D Beast. I've always enjoyed my Sbach but I just wasn't in love with it. How does AS3X change it? Is it fair for me to assume that if I enjoyed the non-AS3X Beast a lot more than the non-AS3X Sbach that I'd feel mostly the same way about both models after the AS3X upgrade?
Mar 13, 2012, 12:03 PM
Registered User
Quote:
Originally Posted by turnerm
You may have done this already but I'd be curious to see a step by step tutorial on how you did this (at least the major steps... don't need details on the pushrod construction or stuff like that unless there's more to it than I think there is!).

Actually... I bet they'll be coming out with one soon. You think?
I've been told they won't... that they're moving on to new products with their AS3X system and they only did the Beast because of its large following.

There really is no step-by-step. It's a very simple "out with the old, in with the new". Use the opportunity to get the CG right! Install that AS3X board back. Measure the CG with battery before you glue it in position.

And, don't forget to change out the aileron servos for the new HD servos for the Beast 3D.

But step-by-step? It starts with "cut the tape". Really... I would know how to write it.
Mar 13, 2012, 12:10 PM
Registered User
Quote:
Originally Posted by turnerm
I'm also curious as to why you like the AS3X modded Sbach moreso than you do the 3D Beast. I've always enjoyed my Sbach but I just wasn't in love with it. How does AS3X change it? Is it fair for me to assume that if I enjoyed the non-AS3X Beast a lot more than the non-AS3X Sbach that I'd feel mostly the same way about both models after the AS3X upgrade?
It's a different beast for sure. It cuts the wind better, less floaty, faster, more precise. It does pattern stuff really well, on rails, but not a great 3D performer. In all fairness, the SBach was never marketed as a 3D airplane. And, I'm not good enough to really evaluate it.

But the wind handling is way better. I was flying the Sbach in very strong winds and having fun. Then I put the Beast 3D up and initially thought there was something wrong with the radio! It was a dramatic difference.

I'd say your last statement is probably right.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Official Eflite UMX Beast Owners thread! darksiede Micro Ready-to-Fly 19846 Nov 02, 2017 11:30 PM
Sold Eflite UMX Beast w/3batt and charger $120 shipped RobDog Aircraft - Electric - Micro & Indoor Airplanes (FS/W) 2 Feb 06, 2011 10:40 PM
Wanted eflite UMX Beast fnlrun Aircraft - Electric - Micro & Indoor Airplanes (FS/W) 11 Dec 12, 2010 05:23 AM
Sold eflite UMX BEAST TERMAGATOR Aircraft - Electric - Micro & Indoor Airplanes (FS/W) 8 Dec 04, 2010 02:16 AM