Thread Tools
Oct 22, 2011, 03:45 AM
Registered Addict
Kris...'s Avatar
Quote:
Originally Posted by edak View Post
woah woah woah woah..... only 2:30 flight time? daaaaaamn!

You make me wish I ordered 10+ batteries, I only ordered 4!
Yep ! One of the reason's that's putting me of getting one.
Sign up now
to remove ads between posts
Oct 22, 2011, 04:17 AM
H-King, DuraFly, Turnigy
Quote:
Originally Posted by maukabud View Post
Are the included servos the below HK-5320 *digital* UM servos?

http://www.hobbyking.com/hobbyking/s...dproduct=17540
Yes these are the included servos that come with the plane, they work pretty well.
Oct 22, 2011, 04:28 AM
H-King, DuraFly, Turnigy
Quote:
Originally Posted by Kris.... View Post
Yep ! One of the reason's that's putting me of getting one.
I will give you guys my exact flight times for different flying styles for 3d and pattern in the next couple days, mind you I was being a little conservative.
Oct 22, 2011, 06:05 AM
Registered User
ducatirdr's Avatar
I just bought 2.

In the video I saw the hovering and figured it would be a good indoor flier. BUT I didn't see it punch out of the hover it actually slowly descends to the floor. Is is capable of punching out of a hover?
Oct 22, 2011, 10:15 AM
Registered User
richos's Avatar
Quote:
Originally Posted by will3d4food View Post
I will give you guys my exact flight times for different flying styles for 3d and pattern in the next couple days, mind you I was being a little conservative.
will3d4food sorry to go off subject . I have your DSM2 Compatible 4Ch Micro RX and 4X 1.7g micro servos all binded to my DX6i all tested with a 2s 180 lipo a (i had to make a lipo pack with a molex plug. I HATE fiddly soldering )
i was not looking forward to making a molux y-adapter so i could have a 2 servo aileron set up on my Cox Warbird FW-190 .

You did say that you would be supplying us with molux plug 6amp ESC.
So can you please COMFIRM that the molux y-adapter will be available for us guys with poor soldering skills .

And will your 10g 2000kv Micro Brushless Outrunner be ok to use with the molux plug 6amp ESC-BEC ?

Keep up the good work with your micro DSM2 RXs and micro servos you have done a great job.

And PLEASE PLEASE try to keep it all PLUG AND PLAY (I love plug and play) but hate fiddly soldering

Can't wait to get my FW-190 in the air
Last edited by richos; Oct 23, 2011 at 07:14 AM.
Oct 22, 2011, 10:43 AM
H-King, DuraFly, Turnigy
Quote:
Originally Posted by richos View Post
will3d4food sorry to go of subject . I have your DSM2 Compatible 4Ch Micro RX and 4X 1.7g micro servos all binded to my DX6i all tested with a 2s 180 lipo a (i had to make a lipo pack with a molex plug. I HATE fiddly soldering )
i was not looking looking forward to making a molux y-adapter so i could have a 2 servo aileron set up on my Cox Warbird FW-190 .

You did say that you would be supplying us with molux plug 6amp ESC.
So can you please COMFIRM that the molux y-adapter will be available for us guys with poor soldering skills .

And will your 10g 2000kv Micro Brushless Outrunner be ok to use with the molux plug 6amp ESC-BEC ?

Keep up the good work with your micro DSM2 RXs and micro servos you have done a great job.

And PLEASE PLEASE try to keep it all PLUG AND PLAY (I love plug and play) but hate fiddly soldering

Can't wait to get my FW-190 in the air
Yes the servos and ESC signal wire come with molux plugs to fit our R415 DSM2 Micro Rx, the ESC plug for the battery lead is for JST. Picture below.

Molux y-adapter will be on the site in the next couple weeks

Everything else message me your question again cause i didnt understand, with the URL or SKU of the motor.
Oct 22, 2011, 04:39 PM
Registered User
Is this suitable for indoor flying? We have a single basketball court size gym, and Pz Sukhoi's are tolerable in it, but are lighter.
Wondering if this will be too fast/heavy?

D.
Oct 22, 2011, 09:44 PM
H-King, DuraFly, Turnigy
Quote:
Originally Posted by darkith View Post
Is this suitable for indoor flying? We have a single basketball court size gym, and Pz Sukhoi's are tolerable in it, but are lighter.
Wondering if this will be too fast/heavy?

D.
Yeah you will need a bigger indoor area, In my opinion it flies a little slower then the UMX Beast. The Pz Sukhoi is 1S and this is 2S.
Oct 23, 2011, 06:47 AM
Registered User
ducatirdr's Avatar
The beginning of the video shows it hovering pretty well. Can it punch out of the hover or do you need to nose it over first?
Oct 23, 2011, 10:05 AM
HELP I AM BEING SET UP!!
maukabud's Avatar
...
Last edited by maukabud; Nov 19, 2011 at 10:29 PM.
Oct 23, 2011, 12:57 PM
Scratch building addict
rotagen's Avatar
REally nice looking planes. One of these days I'm gonna learn to do seperate aileron controls and try to do a roll. I don't know how people do it, I always use Rud-Aileron mixing. The left thumb is just too stupid to do more than one thing !
Oct 23, 2011, 08:23 PM
Registered User
bluemeane's Avatar
Quote:
Originally Posted by rotagen View Post
REally nice looking planes. One of these days I'm gonna learn to do seperate aileron controls and try to do a roll. I don't know how people do it, I always use Rud-Aileron mixing. The left thumb is just too stupid to do more than one thing !
What rudder-aileron mixing do you use??? I have never done that before. Does it work??
Oct 24, 2011, 04:28 AM
Registered User
ducatirdr's Avatar
Quote:
Originally Posted by rotagen View Post
REally nice looking planes. One of these days I'm gonna learn to do seperate aileron controls and try to do a roll. I don't know how people do it, I always use Rud-Aileron mixing. The left thumb is just too stupid to do more than one thing !
Pick up a heli. Even a coax has the rudder control in the same place. The effect is you will learn to use it and it does transfer to back to planes. Get a little one and have something to fly in the house during the winter.
Oct 24, 2011, 03:50 PM
Registered User
does anyone know if the batteries/charger connection for this plane are compatible with the beast/sbach/stryker etc connectors? or am I going to need some sort of charging adapter?
Oct 24, 2011, 03:56 PM
HELP I AM BEING SET UP!!
maukabud's Avatar
...
Last edited by maukabud; Nov 19, 2011 at 10:29 PM.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Micro Magic - Official thread Boomer1 Sailboats 1223 Dec 07, 2016 09:25 AM
Build Log Official HK 450 PRO GT Thread 3D Belt / TT Drive Helicopter Kit Align T-Rex Pro Clone captaingeek Mini Helis 104 May 08, 2012 01:41 AM
Discussion official thank you thread. antslake The 2011 NEAT Fair 24 Sep 27, 2011 09:53 PM
Discussion Slick-3D-micro for PZ Brick - Now 2S Brushless! rcflyer11 Scratchbuilt Indoor and Micro Models 153 Mar 15, 2011 10:09 PM
Off Site Official Micro Citabria Thread youngblood22 Aircraft - Electric - Micro & Indoor Airplanes (FS/W) 4 Mar 21, 2008 09:05 PM