HK DuraFly Micro Slick 360 2S - Official Thread - Page 14 - RC Groups
Thread Tools
Nov 04, 2011, 10:34 AM
Registered User
Quote:
Originally Posted by binaryclock
Once you make your order and pay, go back in to your order and view it.....
Excellent - I sure have a lot of buddy codes I didn't know I had!

Thanks again.

Gene K
Sign up now
to remove ads between posts
Nov 04, 2011, 10:35 AM
I hate winter!
binaryclock's Avatar
Hehe yep HK doesn't do a good job on explaining it
Nov 04, 2011, 11:05 AM
Way to many airplanes!
Thanks for fixing my buddy codes links BC!

@Speedy: Here's a good place to post your buddy codes (they are good only a few weeks though):

http://hk.rc-international.info/swarm/

You can also post them in RCGroups here:
https://www.rcgroups.com/forums/show...427400&page=85
Nov 04, 2011, 11:20 AM
HELP I AM BEING SET UP!!
maukabud's Avatar
...
Last edited by maukabud; Nov 19, 2011 at 11:38 PM.
Nov 04, 2011, 11:29 AM
I hate winter!
binaryclock's Avatar
I ordered 10... odd.. it let me.. $23.56 for 10.. but since weight was an issue I had to drop it down to 9. I couldn't spare not getting the turnigy glove and heater
Nov 04, 2011, 11:37 AM
Registered User
Bud it took about a month to get my order or more.
Nov 04, 2011, 11:41 AM
I hate winter!
binaryclock's Avatar
Quote:
Originally Posted by IndyMatt
Bud it took about a month to get my order or more.
Last order I received was with international (non-ems) shipping and it took 2 weeks exactly. I just made another order with International shipping as well. International shipping was $14.99.. EMS was $30

Maybe they just like Canadians better!



See how we're listed first?

I've had bad luck with EMS too.. the order sitting in china for like a week.
Last edited by binaryclock; Nov 04, 2011 at 11:49 AM.
Nov 04, 2011, 04:16 PM
Now, what does this button do?
Nukiwi's Avatar
Well. mine arrived, minus the black plastic fitting for the gear!!!
So, now waiting to see how Customer Service works...............
(48 hrs now & no "cheery e-mail to say the part is on its way")
Nov 04, 2011, 04:58 PM
Registered User
edak's Avatar
Okay, maidened mine and boy did it fly quick (there were 10km/h winds). It was okay ini the wind because it has balls, but I did plant it into the ground a couple of times. No reportable damage, just the spinner got a little dinged.

Given that I am used to flying that UM T28, this thing is twitchy! Even on 45% expo I was overdoing controls.

It rolls like a dream, it climbs like a dream, I did some stalls, no 3D (I don't know any 3D for planes yet but on helis no probs).

VERY happy! My four batteries gave me the time I needed but I could use a few more batts. I flew mostly at 60% throttle.

I will get more adventurous when/if the wind stops.



EDIT: I had about 3 mins flight with batts and now that I measure them I see that they still had plenty of capacity (3.9V remaining). Oh and the worst part of the plane is getting the 180 battery into that compartment with all the battery wires. The battery also likes to sneak forward into the cavity if you nose it into the ground...
Last edited by edak; Nov 04, 2011 at 05:01 PM. Reason: forgot stuff
Nov 04, 2011, 05:10 PM
Fly, crash, glue. Repeat.
Sweet. Congrats on the maiden.

So assuming it does fly with the 350 mAh battery we should be seeing 5 1/2 mins or so of flight time.

Damn mine's still stuck in customs.
Nov 04, 2011, 05:15 PM
HELP I AM BEING SET UP!!
maukabud's Avatar
...
Last edited by maukabud; Nov 19, 2011 at 11:38 PM.
Nov 04, 2011, 05:56 PM
micro electrics
Fresh buddy code:
Turnigy nano-tech 2s 180mah:
http://www.hobbyking.com/buddy.asp?c...2-650163DFD2A4
Nov 04, 2011, 06:24 PM
Go Sabres!
savall21's Avatar
Are they going to have the batteries at the US Warehouse??
Nov 04, 2011, 07:01 PM
Registered User
JPHen's Avatar
Not certain of the pitch of the prop but do you think it would be a good idea to use a prop with less pitch to slow it down and also lower battery use? Just curious.
Nov 04, 2011, 07:08 PM
micro electrics
Definitely a prop with less pitch will conserve power. Haven't received mine yet but I bet the prop is close to square (pitch/diameter about equal). Also it looks like some weight can be removed by cleaning up the power wiring. Mine is waiting at the post office so I'll know tomorrow.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Micro Magic - Official thread Boomer1 Sailboats 1252 Today 02:54 PM
Build Log Official HK 450 PRO GT Thread 3D Belt / TT Drive Helicopter Kit Align T-Rex Pro Clone captaingeek Mini Helis 104 May 08, 2012 02:41 AM
Discussion official thank you thread. antslake The 2011 NEAT Fair 24 Sep 27, 2011 10:53 PM
Discussion Slick-3D-micro for PZ Brick - Now 2S Brushless! rcflyer11 Scratchbuilt Indoor and Micro Models 153 Mar 15, 2011 11:09 PM
Off Site Official Micro Citabria Thread youngblood22 Aircraft - Electric - Micro & Indoor Airplanes (FS/W) 4 Mar 21, 2008 10:05 PM