Change Sun 10 blade 70mm - Page 53 - RC Groups
Thread Tools
Dec 15, 2011, 05:13 PM
Guarantee at least one landing
Burdo's Avatar
Quote:
Originally Posted by ApexAero
Thanks....looks like you get the rotor, spinner and shroud for that. Weight is 74g, which I am assuming is for the whole shooting match...

Quote:
Originally Posted by alexandermh
Those RC Lander shrouds are real heavy.
I also found aluminium shrouds at Extreme_RC. Bit more expensive but the weight is 40g (shroud only). http://www.extremerc.com.au/estore/i...oducts_id=1059
Last edited by Burdo; Dec 15, 2011 at 07:26 PM.
Sign up now
to remove ads between posts
Dec 15, 2011, 06:03 PM
Registered User
limodune's Avatar
Quote:
Originally Posted by Burdo
Does anybody know what's happened to this shroud. When I first went on the site it was there, went back and now the Product is not found?

I went to order a pr also and found the same, I contacted them (Philip) and he gave me a link page to order them, a couple of days later they were posted, shipping charge to Aus was good :-) I weighed a plastic counter part it went in at 40g, but if you add a decent alloy heat sink I would think the all up weight would be about the same as the Lander unit

Mike
Last edited by limodune; Dec 15, 2011 at 06:16 PM.
Dec 15, 2011, 07:05 PM
RA-TA-MA-HAT-TA
munce31's Avatar
Quote:
Originally Posted by Burdo
Thanks....looks like you get the rotor, spinner and shroud for that. Weight is 76g, which I am assuming is for the whole shooting match...



I also found aluminium shrouds at Extreme_RC. Bit more expensive but the weight is 40g (shroud only). http://www.extremerc.com.au/estore/i...oducts_id=1059
The Extreme_RC housings looks to be made of better material. Does anyone know how much the CS70 rotor weigh?
Dec 15, 2011, 07:25 PM
3DHOG
jcdfrd's Avatar
has anyone ran this fan over 40k yet, this fans wall seems to be 40k
Dec 15, 2011, 07:28 PM
Guarantee at least one landing
Burdo's Avatar
Quote:
Originally Posted by limodune
I went to order a pr also and found the same, I contacted them (Philip) and he gave me a link page to order them, a couple of days later they were posted, shipping charge to Aus was good :-) I weighed a plastic counter part it went in at 40g, but if you add a decent alloy heat sink I would think the all up weight would be about the same as the Lander unit

Mike
I'm also liking the look of the aluminium spinner. I wonder if that would fit the CS rotor, or at least be able to be modified to suit....
Dec 15, 2011, 07:45 PM
The best in EDF since 2005
Extreme_RC's Avatar
Quote:
Originally Posted by Burdo
I also found aluminium shrouds at Extreme_RC. Bit more expensive but the weight is 40g (shroud only). http://www.extremerc.com.au/estore/i...oducts_id=1059
Quite a difference between my housings and the chinese factory doing the lander etc, the finishing is much finer on mine, better stators, higher tolerances.
Dec 15, 2011, 07:54 PM
Guarantee at least one landing
Burdo's Avatar
Quote:
Originally Posted by Extreme_RC
Quite a difference between my housings and the chinese factory doing the lander etc, the finishing is much finer on mine, better stators, higher tolerances.
What is the total weight for this unit?
Dec 15, 2011, 07:58 PM
The best in EDF since 2005
Extreme_RC's Avatar
I would weigh one for you but am completely out of them, waiting on new housing order to come in, slight changes too so might be even lighter than current model.
Dec 15, 2011, 09:25 PM
RC since 1979!! AMA 112747
beachflyer's Avatar
Here is new vid with 10 blade rotor, Cyclone 3300kv Outrunner on 4cells.
SapacF16 Speed Runs.MOV (2 min 25 sec)
Dec 15, 2011, 09:29 PM
Guarantee at least one landing
Burdo's Avatar
Quote:
Originally Posted by beachflyer
Here is new vid with 10 blade rotor, Cyclone 3300kv Outrunner on 4cells.
http://www.youtube.com/watch?v=p35yqY7o-b4
Whoa!!!! Very nice!!!

That flies extremely well. What is the total weight of your F16?
Dec 15, 2011, 09:30 PM
JUNK RADIO
Flazo's Avatar
beachflyer, killer video wow!

more please?

what was your speed?

fred
Dec 15, 2011, 09:41 PM
RA-TA-MA-HAT-TA
munce31's Avatar
Quote:
Originally Posted by beachflyer
Here is new vid with 10 blade rotor, Cyclone 3300kv Outrunner on 4cells.
http://www.youtube.com/watch?v=p35yqY7o-b4
Flies fantastic beachflyer! Btw is there a difference between the SAPAC F-16 and the Phase 3 F-16?
Dec 15, 2011, 09:47 PM
RA-TA-MA-HAT-TA
munce31's Avatar
Quote:
Originally Posted by flazo
beachflyer, killer video wow!

more please?

what was your speed?

fred
I just did an rcspeedo check on my phone with 21degree C (probably a lot cooler at the beach). Fastest pass it could recognize was at 186.4 km/h or 115mp/h. The last pass was probably a lot more faster, but since he was talking the app couldn't recognize/analyze it. Maybe someone with a PC doppler app would yield more accurate results?
Dec 15, 2011, 09:51 PM
Hey Ya'll!! Watch THIS!!
Michael Paxton's Avatar
I think that would fall under the phrase "Crunching numbers"!

Quote:
Originally Posted by munce31
I just did an rcspeedo check on my phone with 21degree C (probably a lot cooler at the beach). Fastest pass it could recognize was at 186.4 km/h or 115mp/h. The last pass was probably a lot more faster, but since he was talking the app couldn't recognize/analyze it. Maybe someone with a PC doppler app would yield more accurate results?
Dec 15, 2011, 09:53 PM
RA-TA-MA-HAT-TA
munce31's Avatar
Lol but besides the 'crunching number', it flies really good. I'm just waiting on extremerc to get the fan combo back in stock so i can put one into my P3 F-16


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
New Product Change Sun 12 blade 90mm Flip Flop Electric Ducted Fan Jet Talk 7335 Jun 28, 2017 11:43 PM
New Product Change Sun 120mm and new 10 blade 70mm fans Flip Flop Electric Ducted Fan Jet Talk 131 Apr 27, 2012 07:07 PM
Sold Change Sun electric retracts Flip Flop Aircraft - Electric - Jets (FS/W) 3 May 23, 2011 06:20 AM
Sold Change Sun Electronic retracts w/Lander struts hole digger Aircraft - Electric - Jets (FS/W) 2 May 06, 2011 01:27 PM
Sold Change Sun Electric retracts NIB 75.00 jzuniga Aircraft - Electric - Jets (FS/W) 2 Sep 03, 2010 09:36 AM