Small Carbon Quad frame with Pulso motors and esc's - RC Groups
Thread Tools
This thread is privately moderated by W4HFV, who may elect to delete unwanted replies.
Oct 12, 2011, 01:45 PM
Trader Rating: 16
Registered User
Sold

Small Carbon Quad frame with Pulso motors and esc's


This was a project that i lost interest in. Frame is carbon fiber and the arms are 10mm aluminum. I ran each motor up individually to determine the rotation and amp draw but this has never been hooked to electronics or flown. Deserves a better home. Has the Pulso X2208 motors. http://montorc.com/x220834.aspx and the pulso Esc's found here http://montorc.com/dl11a.aspx Motors are $41 each and the esc were $22 each. Comes with an extra arm, mikrokopter cover and a bunch of extra 8" props. Asking $230 for everything OBO. Ill take care of the shipping too. Email me at w4hfv@juno.com or call me at 704-201-4644 with any questions.
Sign up now
to remove ads between posts
Oct 12, 2011, 01:56 PM
Trader Rating: 8
EASILY ANNOYED
No flight controller?
Oct 12, 2011, 01:59 PM
Trader Rating: 16
Registered User
Nope you can use ardupilot Mega or similar. There is like 6 out now.
Oct 13, 2011, 01:25 AM
Trader Rating: 2
onairmedia.com.au
AJD i2's Avatar
Would you be interested in posting to Australia?

Cheers
Aaron
Oct 13, 2011, 04:55 AM
Trader Rating: 2
Registered User
Hey I shot you an email, have you tested the 1100kv motors? I have always understood anything over 1000kv was kinda unstable for a quad, how did it work for you?
Oct 13, 2011, 08:09 AM
Trader Rating: 169
Z06 Tony's Avatar
Quote:
Originally Posted by AP7d
Hey I shot you an email, have you tested the 1100kv motors? I have always understood anything over 1000kv was kinda unstable for a quad, how did it work for you?
That is not correct. I have stable quads running 2000kv motors. As a rule of thumb generally the higher the kv the smaller the prop. So when u build a quad u choose your motors based on your weight and frame/prop size. Those are good motors and will work nice with that size quad.
Oct 14, 2011, 08:03 PM
Trader Rating: 0
Just a yard bird
kd4wen's Avatar
Is this package still up for sale?
Oct 24, 2011, 08:37 AM
Trader Rating: 16
Registered User
still for sale
Oct 28, 2011, 08:20 PM
Trader Rating: 16
Registered User
bump
Oct 29, 2011, 10:37 AM
Trader Rating: 2
Registered User
Have you flown this thing? On the montorc website it says that pulso esc's are super advanced and you might run into problems with them running multicopters.
Oct 30, 2011, 09:33 PM
Trader Rating: 16
Registered User
It says the advanced functions are not suitable for quad rotors. Use the basic ones that are programmed in right now and you should be fine. I programmed these with the program card and they seemed to do fine.

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Sold New small quad frame. and another twin frame tc3wins Aircraft - Electric - Multirotor (FS/W) 6 Sep 29, 2011 11:11 AM
For Sale Daedalus Frame (Carbon Fiber) with motors esc FC tom6696950 Aircraft - Electric - Multirotor (FS/W) 8 Sep 04, 2011 03:57 PM
Sold RTF COMBO - Foldable Quad frame, motors and ESC with KK board kevinlib Aircraft - Electric - Multirotor (FS/W) 9 Aug 07, 2011 12:30 PM
Sold Foldable Quad frame, motors and ESC with free KK board kevinlib Aircraft - Electric - Multirotor (FS/W) 6 Jun 23, 2011 12:12 PM
Discussion Gaui 330x Quad Flyer UPGRADED!! New Motors. New ESC's, MIKROCOPTER FRAME! djdaveq Multirotor Drone Talk 9 Jul 13, 2010 05:20 AM