Thread Tools
Oct 20, 2011, 10:04 PM
Suspended Account
Tested my dragon link 2.5 miles away through woods

My friend drove to the store with my plane and everything was working good
Sign up now
to remove ads between posts
Oct 20, 2011, 10:30 PM
Fatshark Repairs AU/NZ
hpcoolahan's Avatar

It Works ....never doubted it though !!


Hey Mike , got my dragonlink hooked up to the Turnigy 9X today just to test it was working and ...................it works great mate , thanks HEAPS for the opportunity that you give us all !!!
Well done.

Cheers
Patrick
Oct 20, 2011, 10:32 PM
Suspended Account
Quote:
Originally Posted by hpcoolahan
Hey Mike , got my dragonlink hooked up to the Turnigy 9X today just to test it was working and ...................it works great mate , thanks HEAPS for the opportunity that you give us all !!!
Well done.

Cheers
Patrick
Was such an easy plug and play process right? Loved it.
Oct 20, 2011, 10:39 PM
Fatshark Repairs AU/NZ
hpcoolahan's Avatar
Quote:
Originally Posted by Bear_Pants
Was such an easy plug and play process right? Loved it.
Damn straight it was , check module pins for polarity and voltage (plug them in on the modular plug that comes with it) , and off you go into the binding process and you done
Oct 20, 2011, 11:29 PM
Registered User
joel0407's Avatar
I have had mine sitting here for about 3 months now. I have been busy slowly putting together my FPV plane. Yesterday I plugged in the DL and was blown away by how quick it was.

Now I'm wondering can I still buy the smaller 9ch receivers and are they cheaper?
Last edited by joel0407; Oct 20, 2011 at 11:30 PM. Reason: add pic
Oct 20, 2011, 11:32 PM
Registered User
joel0407's Avatar
I wanted to add this pic to my last post but I posted too soon.

This is from the DL site.
Oct 21, 2011, 02:18 AM
Registered User
Hello mike can you say yourself if kept silent I to send the new system dragon and it how long think you that I would have him(it) thank you in advance william28270
Oct 21, 2011, 08:48 AM
'FPV'er...not a "LOS'er
Vantasstic's Avatar
Quote:
Originally Posted by joel0407
Now I'm wondering can I still buy the smaller 9ch receivers and are they cheaper?
Nope and nope. I believe the 12 channel is the only one available and it's at the same price as the 9 channel was.
Oct 21, 2011, 09:12 AM
Registered User
I finally got around to installing the Dragonlink transmitter to my JR9303 radio. I saw an earlier post on how to mod the stock module to act as a bridge. This was a great idea. This worked perfectly! I took some quick video on how this works:

By the way, do I now have 8 or 9 channels with this radio?


0164 DRAGONLINK TO STOCK MODULE MOD 04 (0 min 24 sec)
Last edited by Bullseye123; Oct 21, 2011 at 09:46 AM.
Oct 21, 2011, 10:27 AM
Registered User
So I flew my ritewing today only to figure out that in the cold the batts can't put out enough amps AND to figure out that my dragonlink uhf transmitters antenna tip was missing IS IT OK IF THE TIP OF THE TRANSMITER ANTENNA FOR THE DRAGON LINK BE OFF. WOULD IT CAUSE ANY DAMAGE. I MEAN THAT TIP IS JUST PLASTIC RIGHT.
Oct 21, 2011, 11:09 AM
Nevermind...
isaacintheclouds's Avatar
Quote:
Originally Posted by GLADUS63
May it's your bec that doesn't output enough amp ?
Maybe, but it worked for a while with the wookong m system before I used the digital micros. Both micros got fried too. I only had 8 or 10 flights with the micro digitals if that. I put an old FM Rx on just to diagnose and the wookong looked ok on the programming screens, so there is something wrong with my DL Rx, I just dont know why. Maybe the wookong bec got hot and fried something in the DL Rx? I have 2 more DL Rx ordered. Hopefully it was just the servos that didnt agree with the DL.
Oct 21, 2011, 02:57 PM
Registered User
GLADUS63's Avatar
Quote:
Originally Posted by isaacintheclouds
Maybe, but it worked for a while with the wookong m system before I used the digital micros. Both micros got fried too. I only had 8 or 10 flights with the micro digitals if that. I put an old FM Rx on just to diagnose and the wookong looked ok on the programming screens, so there is something wrong with my DL Rx, I just dont know why. Maybe the wookong bec got hot and fried something in the DL Rx? I have 2 more DL Rx ordered. Hopefully it was just the servos that didnt agree with the DL.
Could you check your BEC output voltage ?
Oct 21, 2011, 10:51 PM
Suspended Account
Can someone double check my DL antenna placement again? I moved some stuff around.

Oct 21, 2011, 11:09 PM
Village Idiot!
ScooterInVegas's Avatar
Dont like the EZ Connectors. Bad juju. Control rods are a little long for not being supported. The lack of a prop is probably going to be your biggest down fall. It will make it difficult to get the desired altitude.
Oct 21, 2011, 11:16 PM
Suspended Account
Quote:
Originally Posted by ScooterInVegas
Dont like the EZ Connectors. Bad juju. Control rods are a little long for not being supported. The lack of a prop is probably going to be your biggest down fall. It will make it difficult to get the desired altitude.
Well since moving my servos I don't get flex in the rods at all. But yeah I don't like the EZ connectors either. Where can I buy those crazy control rods and connectors people put on there wings? Been trying to find that forever now...


And nah that's a prototype prop. Just can't see it :P


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
New Product Long Range UHF RC system now avail on STOCK thomasscherrer FPV Equipment 14300 Jun 07, 2017 03:10 AM
Wanted Scherrer UHF long Range or Dragon Link patrick21x FPV Equipment (FS/W) 6 Dec 24, 2015 03:50 AM
Yippee! Win a FREE Dragon Link UHF Long range RC system - BEST VIDEO contest for AUGUST !!! JettPilot FPV Talk 60 Aug 21, 2014 03:40 PM
New Product ChainLink UHF Long Range System siim227 FPV Talk 2853 Jul 01, 2013 04:23 PM
Yippee! Win a FREE Dragon Link UHF RC System - Video Contest JettPilot FPV Talk 63 Aug 02, 2011 10:52 PM