Twisted Hobbys Owners Thread! - Page 312 - RC Groups
Thread Tools
Feb 06, 2013, 06:37 AM
Don't worry be happy :)
Stark's Avatar
I used the DD 8x4 on 2 cells when I learned to hover because they have a more gradual power curve so things happend a little slower. Now I only use the SF 8x4.3 on 2 cells because, in my opinion, the acceleration and speed are better.
On my Sbach 342 I use a 3 cell setup with the X-2204/28 KV1480 and there I use the DD prop because the RPM is too much for the SF. The blades of the SF flexes and make strange noises at full throttle. The DD 8x4 is very nice on 3 cells!
Sign up now
to remove ads between posts
Feb 07, 2013, 09:18 AM
Suspended Account
Dan5.0's Avatar
Quote:
Originally Posted by Stark
This one is great! And come with adaptor rings for GWS DD and probably APC. I use it right now in my Crack Yak Lite. It's also a bit more powerful than the Turnigy 2204-14T.

SunnySky 2204 KV1800
Never saw the Sunyskys in green, had two of the black ones and both didn't last that long.
Feb 07, 2013, 09:45 AM
Don't worry be happy :)
Stark's Avatar
Then you must have had bad luck.
Both mine are black and without the Sunnysky branding. I've flown countless of hours with my X2204-21 and the X2204-28.
Now I'm running the 28 on 3 cells and it's working great!
Feb 07, 2013, 02:36 PM
Registered User
Aviefly's Avatar
Yeh I must have had good luck with them too. Must have about five or six of them and they're all still going after lots of use and abuse. Even managed to bend the back of one of them, thought the motor was toast with the bell binding on it but a bit of gentle persuasion with vice and a pair of grips and it was good as new. Took the two screws out for the prop saver slipped the bell off and just worked away at it till the gap was the same all the way round with the bell back on, stuck the screws back in and have continued to abuse it since then with no problems at all. Like you Stark I've been running the 28 on 3s for a good while, I didn't think it would last long on 3s but it doesn't seem to bother it at all.
Feb 07, 2013, 03:58 PM
Registered User
Mr Big Head's Avatar
Just pulled the trigger on the Regular Crack Yak with landing gear. It was a no brainer for me although I did struggle between it and the Slick. A few of them were at or field last weekend and after flying the Slick it was very apparent how poorly my 2 year old 3DHS 330 was flying. That plane started out at under 6 ounces and weighs now about 10. Several tubes of welders on her!
Feb 07, 2013, 10:02 PM
Registered User
powerstroke01's Avatar
Dang just got my 32" extra slick flying. Yes. After dark with lights. ahha
Feb 07, 2013, 10:52 PM
Team Twisted!
hone1er's Avatar
Quote:
Originally Posted by powerstroke01
Dang just got my 32" extra slick flying. Yes. After dark with lights. ahha
That's my favorite foamy. I have lights on mine too. It needs a new motor and aileron servo at the moment though

I love the scheme on it!
Feb 08, 2013, 12:00 AM
Registered User

Mini Yak Beach flying in Thailand


Mini Yak at the beach in Phuket, Thailand. Sunshine and lite breeze.......

Mini Crack Yak by RC Factory and Twisted Hobbys (2 min 59 sec)
Feb 08, 2013, 12:24 AM
TEAM TWISTED
ROLLING CIRCLE's Avatar
Awesome flight! That is a sweet spot!
Feb 08, 2013, 10:13 AM
Registered User
Thumb Blisters's Avatar
I know this has been asked already but I can't seem to find the post... Can I get a twisted plane on Phoenix rc4? I'm in for a blizzard and need a fix bad!
Feb 08, 2013, 12:26 PM
Registered User
Aviefly's Avatar
Quote:
Originally Posted by Thumb Blisters
I know this has been asked already but I can't seem to find the post... Can I get a twisted plane on Phoenix rc4? I'm in for a blizzard and need a fix bad!
No not on Phoenix it's on Real Flight if I remember right, can't remember which version though.
Feb 08, 2013, 12:28 PM
Registered User
Thumb Blisters's Avatar
Quote:
Originally Posted by aviefly
no not on phoenix it's on real flight if i remember right, can't remember which version though.
crap!
Feb 08, 2013, 02:12 PM
Registered User
carr52's Avatar
You must be in the north east. Looks like its gonna be a good one. Be safe and stay warm.

Tom
Feb 08, 2013, 06:33 PM
AMA Another Mans Airplane
cale10's Avatar
Quote:
Originally Posted by Thumb Blisters
I know this has been asked already but I can't seem to find the post... Can I get a twisted plane on Phoenix rc4? I'm in for a blizzard and need a fix bad!
this is just one reason RF is better. RF has user created models.
Feb 08, 2013, 07:13 PM
Registered User
Thumb Blisters's Avatar
Wish I asked before I bought Phoenix. Oh well. Couple decent foamies on here.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Build Log Twisted Hobbys - Telink 43" Yak 55 - Build, Fly, Vid hercdriver7777 3D Foamies 1008 Apr 04, 2017 01:39 PM
Discussion Twisted Hobbys - RC Factory USA Sbach 342 39" Build Thread & Flight Video!!!!! aerofundan 3D Foamies 497 May 24, 2015 09:01 AM
Build Log Twisted Hobbys - Telink 3D Buster EPP Bipe Build Thread, Flight Video just posted!!!! aerofundan 3D Foamies 578 Apr 21, 2015 05:01 AM
Discussion Twisted Hobbys - RC Factory USA YAK-55 39" Build Thread/Videos & Flight Video!!!!! cbriggs11 3D Foamies 78 May 28, 2014 06:40 PM
Discussion RC Factory USA - Twisted Hobbys - 1.2m SU 29 Build Thread. hercdriver7777 3D Foamies 97 Oct 19, 2011 07:34 AM