Twisted Hobbys Owners Thread! - Page 307 - RC Groups
Shop our Airplanes Products Drone Products Sales
Thread Tools
Feb 01, 2013, 08:38 AM
Twisted Do Nut!
KamikazePilot's Avatar
Now only if we could get all the crack brotherhood together for some combat, that would be Epic.

That 14gm motor looks like a good canidate for frankenyak. Hmm!
Sign up now
to remove ads between posts
Feb 01, 2013, 08:43 AM
Suspended Account
Dan5.0's Avatar
Ok........Well first I built and painted Brads, brought the old shredder scheme back. Then I started working on mine which I should have in the air today.
Feb 01, 2013, 08:53 AM
Boooriiiiing.
MadMonkey572's Avatar
Quote:
Originally Posted by hercdriver7777
Let the Crack Combat begin!
Way ahead of you... I've already taken out a Flyzone Corvalis with mine

EDIT: Whoah wait what? New plane???
Feb 01, 2013, 09:14 AM
Registered Addict
Kris...'s Avatar
Nice Dan your have a real flare when it comes to plane art.
Feb 01, 2013, 09:23 AM
Suspended Account
Dan5.0's Avatar
Thanks bro
Feb 01, 2013, 09:25 AM
Converting O2 to CO2
Left Coast DJ's Avatar
Telnik 43" or Crack Yak 32" - which ones easier to learn 3D on and impress the ladies at the park?
Feb 01, 2013, 09:36 AM
Team Twisted!
cdee's Avatar
Quote:
Originally Posted by Left Coast DJ
Telnik 43" or Crack Yak 32" - which ones easier to learn 3D on and impress the ladies at the park?
Crack Yak 32... you will have a fan club after a short time of going to the same part... lol...!!
.
cdee
.
Feb 01, 2013, 09:38 AM
Boooriiiiing.
MadMonkey572's Avatar
Man... if only that wing used the same batteries as the CY or maybe 1300's I'd be all over it. Bigger one in the future maybe??
Feb 01, 2013, 10:00 AM
Registered User
so how do i get a Dan 5.0 custom painted wing?

cause those are bad ass.
Feb 01, 2013, 10:56 AM
Suspended Account
Dan5.0's Avatar
Guys I wanted to share a little build trick we've been toying with in order to keep from gluing your servos in permanently, and this works outstanding.

For servo installation simply run a bead around the servo and let cure. As for the servo slot just smear Welders into the foam it you don't want a bead of Welders in there. This is easily an over night cure on the glue too. If the glue is at all tacky it will be in there like concrete. If done correctly the two Welders surfaces create a rubbery hold that keeps the servo from moving but makes removing them very easy...
Last edited by Dan5.0; Feb 26, 2013 at 03:45 PM.
Feb 01, 2013, 12:12 PM
Registered Addict
Kris...'s Avatar
Quote:
Originally Posted by Left Coast DJ
Telnik 43" or Crack Yak 32" - which ones easier to learn 3D on and impress the ladies at the park?
If you need a plane to impress the ladies you need to re-think your stratergy Mate
Feb 01, 2013, 12:22 PM
Team Twisted!
cdee's Avatar
Quote:
Originally Posted by Kris...
If you need a plane to impress the ladies you need to re-think your stratergy Mate
yea, but if you are impressing a lady with a plane, it might be the lady you want to latch onto...
.
cdee
.
Feb 01, 2013, 12:29 PM
Team Extreme! Team Twisted!
hercdriver7777's Avatar
Quote:
Originally Posted by KamikazePilot
Now only if we could get all the crack brotherhood together for some combat, that would be Epic.

That 14gm motor looks like a good canidate for frankenyak. Hmm!
Combat crackathon at SEFF?
Feb 01, 2013, 12:31 PM
Team Twisted!
cdee's Avatar
Crack Series Motors..!!

for those of you that have not noticed, there have been some new motors added to the Crack Series family.

http://www.twistedhobbys.com/Crack-S...Motors_c80.htm

The 50g motor works really well in the 39" models, 80g in the 44" models and the 100g in the 48" models for monster power.
.
cdee
.
Feb 01, 2013, 12:31 PM
Team Twisted!
cdee's Avatar
Quote:
Originally Posted by hercdriver7777
Combat crackathon at SEFF?
you got me thinking about coming out now...
.
cdee
.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Build Log Twisted Hobbys - Telink 43" Yak 55 - Build, Fly, Vid hercdriver7777 3D Foamies 1008 Apr 04, 2017 01:39 PM
Discussion Twisted Hobbys - RC Factory USA Sbach 342 39" Build Thread & Flight Video!!!!! aerofundan 3D Foamies 497 May 24, 2015 09:01 AM
Build Log Twisted Hobbys - Telink 3D Buster EPP Bipe Build Thread, Flight Video just posted!!!! aerofundan 3D Foamies 578 Apr 21, 2015 05:01 AM
Discussion Twisted Hobbys - RC Factory USA YAK-55 39" Build Thread/Videos & Flight Video!!!!! cbriggs11 3D Foamies 78 May 28, 2014 06:40 PM
Discussion RC Factory USA - Twisted Hobbys - 1.2m SU 29 Build Thread. hercdriver7777 3D Foamies 97 Oct 19, 2011 07:34 AM