Twisted Hobbys Owners Thread! - Page 303 - RC Groups
Thread Tools
Jan 27, 2013, 05:12 AM
Slopeaholic
jimbo320's Avatar
Quote:
Originally Posted by carr52
well I went back to the gopro web site and did the update thing, again. still no sound.

Tom
Just a thought, you do have the backdoor on with the holes in? Otherwise the sound is very serverly muffled.
Ive found that reformatting the card and removing the battery sometimes resets things. Try that too, otherwise, it may be a back to the store issue.
Hows the video? Ive heard the hero 3 is exceptional (if not reliable).
Jimbo.
Sign up now
to remove ads between posts
Jan 27, 2013, 10:06 AM
Twisted Do Nut!
KamikazePilot's Avatar
Nice sloper jimbo! What paints do you use on ones like that? I'm thinking auto paints. I'd put some house of color candy on it.
Jan 27, 2013, 11:50 AM
Registered User
carr52's Avatar
Jimbo, the video is excellent. The gopro has its own video style. Love it. Bummer about the sound.

Tom
Jan 27, 2013, 12:28 PM
Slopeaholic
jimbo320's Avatar
Quote:
Originally Posted by KamikazePilot
Nice sloper jimbo! What paints do you use on ones like that? I'm thinking auto paints. I'd put some house of color candy on it.
Yes Kam, standard cellulose auto paints.
Man, I'm getting nervous just thinking about chucking that lead sled off a cliff, with only sea below! Gulp.
Jan 27, 2013, 04:30 PM
Registered User
3flyguy3's Avatar

Stuttering motor


I think this has been discussed but I'm not sure if it was in this forum. But my motor (Twisted Series 2204-1450) is beginning to stutter on start up. As I gradually raise the throttle it stutters before engaged. Is the motor dying or is this an esc (Hobby King 12A, my twisted esc died) issue? I have a Turnigy 2204/14 motor I can use to rule out motor but thought I'd ask here in the meantime.
Jan 27, 2013, 04:44 PM
Registered User
Krycek W's Avatar
Quote:
Originally Posted by 3flyguy3
I think this has been discussed but I'm not sure if it was in this forum. But my motor (Twisted Series 2204-1450) is beginning to stutter on start up. As I gradually raise the throttle it stutters before engaged. Is the motor dying or is this an esc (Hobby King 12A, my twisted esc died) issue? I have a Turnigy 2204/14 motor I can use to rule out motor but thought I'd ask here in the meantime.
I had experience a problem like you have in the past, with another brand of motor. It was a ESC issue.
Jan 27, 2013, 04:46 PM
Don't worry be happy :)
Stark's Avatar
I also think the ESC is the culprit here. When I have had this type of problem a new ESC has solved it so far.
Jan 27, 2013, 05:05 PM
Registered User
3flyguy3's Avatar
Well that's gonna suck big time. I just replaced the dead twisted esc with this one. What causes an esc to fail? Could I be doing something to cause failure?
Jan 27, 2013, 09:12 PM
The Twisted Elf
lugnutz's Avatar
not setting proper end points can cause this
Jan 27, 2013, 09:52 PM
Registered User
3flyguy3's Avatar
Quote:
Originally Posted by lugnutz
not setting proper end points can cause this
I've never set end points (don't even know what that means), why would the problem start now after several flights?
Jan 27, 2013, 10:55 PM
Twisted Do Nut!
KamikazePilot's Avatar
Quote:
Originally Posted by jimbo320
Yes Kam, standard cellulose auto paints.
Man, I'm getting nervous just thinking about chucking that lead sled off a cliff, with only sea below! Gulp.
Lucky you jimbo, wish we could still get that paint here. Loved working with it. Throwing a plane off the side of a cliff would give me more grey hair.

Was the motor doing the same thing before? Seems hinky to me that you would have two esc go in a short time.

I'm curious too lugz care to go into detail on what you mean?
Jan 28, 2013, 12:51 AM
Registered User
ccpdx's Avatar
Quote:
Originally Posted by ccpdx
I did a few quick searches but didn't find the answer.

What do you guys do when Welders gets hard and crunchy? It seems to lose its flexibility & get brittle over time. I recall something about using acetone to remove it.... Is there a way to just soften it so it'll be pliable again? I'm mainly concerned with hinge repair, e.g. the rudder. Any better glue that'll stay soft?

Thanks,
Charles
Anybody else experience this?
Jan 28, 2013, 08:14 AM
Suspended Account
Dan5.0's Avatar
Yes, Welders gets stiff if you use too much on the repairs. Sometimes we do quick repairs while still trying to keep flying. When repairing any tears just use a minimal coating on the torn foam, let it tack up for a minute then join, it will not get crunchy like you describe.
Jan 28, 2013, 08:40 AM
Registered User
3flyguy3's Avatar
Quote:
Originally Posted by KamikazePilot
Was the motor doing the same thing before? Seems hinky to me that you would have two esc go in a short time.
No, the motor wasn't doing this before. I originally had the twisted combo. Long story short, I used the rx from my Edge to test something on another plane. When I plugged everything back up I got no response (no happy tune from esc, no motor). So I got a Turnigy motor and HK esc to try to rule out bad motor or esc. Turned out the esc died. So now I'm currently using the Crack 2204/1450 and the HK esc. Start up and ran fine for awhile, now I'm getting the stutter start.
Jan 28, 2013, 09:51 AM
Registered User
just a friendly reminder from your neighborhood aspiring 3D'er...

props hurt when they hit you in the forehead.

if your going to hover close in make sure the wind isnt blowing AT YOU.

lol.

no real damage. bruised forehead and ego.
had to happen while the mother in law was watching, commenting on how impressed she was. haha.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Build Log Twisted Hobbys - Telink 43" Yak 55 - Build, Fly, Vid hercdriver7777 3D Foamies 1008 Apr 04, 2017 01:39 PM
Discussion Twisted Hobbys - RC Factory USA Sbach 342 39" Build Thread & Flight Video!!!!! aerofundan 3D Foamies 497 May 24, 2015 09:01 AM
Build Log Twisted Hobbys - Telink 3D Buster EPP Bipe Build Thread, Flight Video just posted!!!! aerofundan 3D Foamies 578 Apr 21, 2015 05:01 AM
Discussion Twisted Hobbys - RC Factory USA YAK-55 39" Build Thread/Videos & Flight Video!!!!! cbriggs11 3D Foamies 78 May 28, 2014 06:40 PM
Discussion RC Factory USA - Twisted Hobbys - 1.2m SU 29 Build Thread. hercdriver7777 3D Foamies 97 Oct 19, 2011 07:34 AM