Thread Tools
Old Dec 02, 2012, 08:29 PM
ATCH is offline
Find More Posts by ATCH
AMA 1034020
ATCH's Avatar

cwojcik


What's the electronic setup being used in the MCY?
Sign up now
to remove ads between posts
Old Dec 02, 2012, 08:51 PM
KamikazePilot is offline
Find More Posts by KamikazePilot
Twisted Do Nut!
KamikazePilot's Avatar
Quote:
Originally Posted by cwojcik View Post
There is no reason to smear glue over the whole hinge line. Just put a dab at the ends to keep it from tearing, preferably with a piece of blenderm over it.

In other news, I just got back from an afternoon indoors flying the Crack Yak mini. This thing is an absolute blast. It's quicker, snappier, rolls faster, and has more power than the standard Crack Yak, and the smaller size means it eats up less airspace so you can do high-speed maneuvers easier in a smaller space. It's also incredibly stable and smooth for a small airplane. I think it's my favorite in the Crack Yak series!
Sounds good Cody. How about slower speeds? Probably doesn't float as good at the larger ones. Ready for more info as it becomes available.
Old Dec 02, 2012, 09:11 PM
cwojcik is offline
Find More Posts by cwojcik
Extremely Twisted
cwojcik's Avatar
Actually it's very stable at lower speeds. Yes it has gotten smaller, but much lighter as well.

The motor is a combination motor and ESC in one unit. Servos are ~3 gram on the tail, 4 gram on the ailerons. Battery is a 2S 180-250, 250 gets a good five minutes of hard flying easily.
Old Dec 02, 2012, 09:45 PM
cwojcik is offline
Find More Posts by cwojcik
Extremely Twisted
cwojcik's Avatar
Quick teaser for you guys!
Crack Yak Mini Teaser (0 min 55 sec)
Old Dec 02, 2012, 09:48 PM
justinsebastian is offline
Find More Posts by justinsebastian
Justin S
justinsebastian's Avatar
Quote:
Originally Posted by cwojcik View Post
Wow...that's a wild child.
Old Dec 02, 2012, 09:48 PM
stgdz is offline
Find More Posts by stgdz
Volts>amps
stgdz's Avatar
Chris and Cody,

Is there a flying area size that aimed for with the mini? Is it a two car or one car garage plane?
Old Dec 02, 2012, 09:49 PM
pugsam is offline
Find More Posts by pugsam
LiPo-Sucker & Airframe EMT
pugsam's Avatar
Quote:
Originally Posted by cwojcik View Post
.....Battery is a 2S 180-250, 250 gets a good five minutes of hard flying easily.
Looks gorgeous!

What type discharge plug? JST?

Old Dec 02, 2012, 09:59 PM
Aaeolien is offline
Find More Posts by Aaeolien
3d addict
O man that thing looks amazing. Good work cafeteria flyer. Cannot wait for this one.
Old Dec 02, 2012, 10:04 PM
KamikazePilot is offline
Find More Posts by KamikazePilot
Twisted Do Nut!
KamikazePilot's Avatar
That sealed the deal for me. Got it on my to get list for sure.
Old Dec 02, 2012, 10:04 PM
cwojcik is offline
Find More Posts by cwojcik
Extremely Twisted
cwojcik's Avatar
Quote:
Originally Posted by stgdz View Post
Chris and Cody,

Is there a flying area size that aimed for with the mini? Is it a two car or one car garage plane?
We didn't really aim for a flying size. We wanted to build the smallest plane we could, keep the performance good, the build easy, and the parts accessible. The UMX Crack Yak I built was pretty good, but needed a bit more power, and it was difficult to build light enough. So, we settled on a 22" span 2S brushless outline. The result is a plane with all of the character of the Crack Yak but for a smaller space and higher energy flying. You could fly it in a 2 car garage if it's big enough, but the thing is really at home in a standard basketball court like you see in the video, which is a bit tight for most 32" planes. There is enough room to stretch its legs before the walls come up and you can keep it on the wing instead of just in a harrier/hover the whole time. It takes up a bit more space than a UMX Extra 300 or 4-site, but it flies much better!

Quote:
Originally Posted by pugsam View Post
Looks gorgeous!

What type discharge plug? JST?

Yes, standard servo plugs as well. No special receivers or equipment necessary!
Old Dec 02, 2012, 10:06 PM
Aaeolien is offline
Find More Posts by Aaeolien
3d addict
Ok so the next question becomes when can we place an order?
Old Dec 02, 2012, 10:12 PM
KamikazePilot is offline
Find More Posts by KamikazePilot
Twisted Do Nut!
KamikazePilot's Avatar
Quote:
Originally Posted by Aaeolien View Post
Ok so the next question becomes when can we place an order?
When I have my bench cleared I hope. Hell who am I kidding I'll clear the bench for it.
Old Dec 02, 2012, 10:15 PM
3flyguy3 is online now
Find More Posts by 3flyguy3
Registered User
3flyguy3's Avatar
Quote:
Originally Posted by cwojcik View Post
Ok I'll take one of each color and flying instructions as seen in the video.
Old Dec 02, 2012, 10:23 PM
hercdriver7777 is offline
Find More Posts by hercdriver7777
Team Extreme! Team Twisted!
hercdriver7777's Avatar
Quote:
Originally Posted by KamikazePilot View Post
Sounds good Cody. How about slower speeds? Probably doesn't float as good at the larger ones. Ready for more info as it becomes available.
This plane is very similar to the way the original CY flies. The very first production proto of the VY was 29" and not 31". The MIni flies almost exactly like the 29" did. I think the design of the airframe is extremely well suited to the wing loading of the Mini!

If you Like your CY original on 3S, then you will love the Mini! More power, more crazy, smaller package. I love this little plane. It is currently my favorite of all the existing Crack planes.

Quote:
Originally Posted by cwojcik View Post
Awesome work man! I think that was just enough of a teaser to get Brad motivated to push the release date!

Quote:
Originally Posted by justinsebastian View Post
Wow...that's a wild child.
This airplane is a high energy machine! But don't let the potential craziness scare you. Just like the original CY, it is very docile and easy to fly when you want it to be.

Quote:
Originally Posted by stgdz View Post
Chris and Cody,

Is there a flying area size that aimed for with the mini? Is it a two car or one car garage plane?
Not by design. Like Cody said, it was about what we could shrink it to without getting into equipment that was inefficient for the job. As a result, this mini will take about half the space to fly as the original CY.

Quote:
Originally Posted by Aaeolien View Post
O man that thing looks amazing. Good work cafeteria flyer. Cannot wait for this one.
Cafeteria, office, garage, back yard. It's small enough that you don't need a gym. But, a gym is nice and roomy for the mini.

Quote:
Originally Posted by Aaeolien View Post
Ok so the next question becomes when can we place an order?
Soon

Quote:
Originally Posted by KamikazePilot View Post
When I have my bench cleared I hope. Hell who am I kidding I'll clear the bench for it.
You will not regret this plane! I guarantee it.
Old Dec 02, 2012, 11:19 PM
Rishelman is offline
Find More Posts by Rishelman
Knobbs
Quote:
Originally Posted by cwojcik View Post
There is no reason to smear glue over the whole hinge line. Just put a dab at the ends to keep it from tearing, preferably with a piece of blenderm over it.

In other news, I just got back from an afternoon indoors flying the Crack Yak mini. This thing is an absolute blast. It's quicker, snappier, rolls faster, and has more power than the standard Crack Yak, and the smaller size means it eats up less airspace so you can do high-speed maneuvers easier in a smaller space. It's also incredibly stable and smooth for a small airplane. I think it's my favorite in the Crack Yak series!
Wish I would have known that about the glue. This was my first EPP plane, only had depron before. Was just doing what the build video showed on TH site. Live and learn.

Rishelman


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Twisted Hobbys - RC Factory USA Sbach 342 39" Build Thread & Flight Video!!!!! aerofundan 3D Foamies 497 May 24, 2015 09:01 AM
Build Log Twisted Hobbys - Telink 43" Yak 55 - Build, Fly, Vid hercdriver7777 3D Foamies 1007 May 21, 2015 04:02 PM
Build Log Twisted Hobbys - Telink 3D Buster EPP Bipe Build Thread, Flight Video just posted!!!! aerofundan 3D Foamies 578 Apr 21, 2015 05:01 AM
Discussion Twisted Hobbys - RC Factory USA YAK-55 39" Build Thread/Videos & Flight Video!!!!! cbriggs11 3D Foamies 78 May 28, 2014 06:40 PM
Discussion RC Factory USA - Twisted Hobbys - 1.2m SU 29 Build Thread. hercdriver7777 3D Foamies 97 Oct 19, 2011 07:34 AM