Thread Tools
Old Aug 12, 2012, 02:33 PM
Dan5.0 is offline
Find More Posts by Dan5.0
Suspended Account
Dan5.0's Avatar
Just gave it a quick test in the cart barn...wow! It's the smoothest most powerful motor I've flown with and I've tested every motor possible including Hacker. Can't wait to get an outdoor flight tonight on the golf course.
Sign up now
to remove ads between posts
Old Aug 12, 2012, 03:22 PM
3dflyboy1 is offline
Find More Posts by 3dflyboy1
Registered User
Quote:
Originally Posted by hone1er View Post
Thanks! Yes, That was with the stock power combo and gens ace 3s 1550s. I've also flown the plane on 3s 2100 packs but i prefer something a little smaller. 1500-1800mah will give the most float
I picked out the 78g for a little more power, hopefully it'll work out. I also got four 3s 1600mAh 40C sky lipos! I'm kinda excited.
Old Aug 12, 2012, 07:15 PM
STLAV8R is offline
Find More Posts by STLAV8R
Registered User
STLAV8R's Avatar
I have been experimenting with the Twisted Hobbys 24g motor on the Crack Yak and Pitts bipe.
Tried the following combinations:

1) 2S and 8x4.3 prop
2) 2S and 9x4.7 prop
3) 3S and 8x4.3 prop
4) 3S and 9x4.7 prop

For slow and floaty flying, the 2S and 9x4.7 is the ticket.
For not as slow and floaty flying, but a lot more power, the 3s and 9x4.7 is the ticket.

However, I have read where running 3S with the 9x4.7 prop will smoke the 24g TH motor. Is this true? If so, what 9" prop can be used? Just don't care for the 8x4.3 on 2S or 3S....
Old Aug 12, 2012, 07:16 PM
RCAddict16 is offline
Find More Posts by RCAddict16
Suspended Account
Quote:
Originally Posted by STLAV8R View Post
I have been experimenting with the Twisted Hobbys 24g motor on the Crack Yak and Pitts bipe.
Tried the following combinations:

1) 2S and 8x4.3 prop
2) 2S and 9x4.7 prop
3) 3S and 8x4.3 prop
4) 3S and 9x4.7 prop

For slow and floaty flying, the 2S and 9x4.7 is the ticket.
For not as slow and floaty flying, but a lot more power, the 3s and 9x4.7 is the ticket.

However, I have read where running 3S with the 9x4.7 prop will smoke the 24g TH motor. Is this true? If so, what 9" prop can be used? Just don't care for the 8x4.3 on 2S or 3S....
Yeah use the 9x4.7 on 2S.
Old Aug 12, 2012, 07:17 PM
Gravitycheat is offline
Find More Posts by Gravitycheat
Don't give in to gravity
Gravitycheat's Avatar


+





=



Which Causes This
:
And if you want to know why, Watch this:
Let's Roll - Starring the 48' EPP Sbach 342 from Twisted Hobbys (1 min 7 sec)




Brad,
The new carbon fiber servo arm extensions are a great addition to your product line-up. Very well made, pre drilled holes lined up perfectly to the Tower Pro arm’s holes and as you can see it brought out the “crazy” in the Sbach. ( I like crazy)

These extension arms would be great for anyone looking to increase your control surface throw in the larger Telink or RC Factory products.
Last edited by Gravitycheat; Aug 12, 2012 at 07:22 PM.
Old Aug 12, 2012, 07:18 PM
RCAddict16 is offline
Find More Posts by RCAddict16
Suspended Account
That is some ridiculous aileron throw
Old Aug 12, 2012, 07:23 PM
Gravitycheat is offline
Find More Posts by Gravitycheat
Don't give in to gravity
Gravitycheat's Avatar
Quote:
Originally Posted by RCAddict16 View Post
That is some ridiculous aileron throw
You do mean ridiculously good…Right?
Old Aug 12, 2012, 07:26 PM
RCAddict16 is offline
Find More Posts by RCAddict16
Suspended Account
What do you think
Old Aug 12, 2012, 07:27 PM
Gravitycheat is offline
Find More Posts by Gravitycheat
Don't give in to gravity
Gravitycheat's Avatar
Quote:
Originally Posted by RCAddict16 View Post
What do you think
I try not to
Old Aug 12, 2012, 07:28 PM
RCAddict16 is offline
Find More Posts by RCAddict16
Suspended Account
I can't help not thinking (too dumb) haha jk
Old Aug 12, 2012, 07:34 PM
astolenpose is offline
Find More Posts by astolenpose
Registered Abuser
astolenpose's Avatar
Dear Brad, please send this kid everything he needs to get this plane in the air. More time flying less time posting.
Old Aug 12, 2012, 07:50 PM
STLAV8R is offline
Find More Posts by STLAV8R
Registered User
STLAV8R's Avatar
Quote:
Originally Posted by RCAddict16 View Post
Yeah use the 9x4.7 on 2S.
So the motor will be toast with the 9x4.7 on 3S?
Old Aug 12, 2012, 07:52 PM
RCAddict16 is offline
Find More Posts by RCAddict16
Suspended Account
Quote:
Originally Posted by STLAV8R View Post
So the motor will be toast with the 9x4.7 on 3S?
Pretty much haha
Old Aug 12, 2012, 09:04 PM
BrownEyedFool is online now
Find More Posts by BrownEyedFool
You're killin' me Smalls
BrownEyedFool's Avatar
Redoing some hinging on my Extra slick, using Blenderm at the moment.

Should i be closing that gap between the points of the two beveled edges or leaving a gap? 1/16"? 1/32"?

I assume Blenderm is an acceptable hinge replacement over Welder's, I have trouble getting the Welder's thin enough.
Old Aug 12, 2012, 09:14 PM
STLAV8R is offline
Find More Posts by STLAV8R
Registered User
STLAV8R's Avatar
Quote:
Originally Posted by RCAddict16 View Post
Pretty much haha
Looks like I will stick with 2S on the 9x4.7.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Twisted Hobbys - RC Factory USA Sbach 342 39" Build Thread & Flight Video!!!!! aerofundan 3D Foamies 497 May 24, 2015 09:01 AM
Build Log Twisted Hobbys - Telink 43" Yak 55 - Build, Fly, Vid hercdriver7777 3D Foamies 1007 May 21, 2015 04:02 PM
Build Log Twisted Hobbys - Telink 3D Buster EPP Bipe Build Thread, Flight Video just posted!!!! aerofundan 3D Foamies 578 Apr 21, 2015 05:01 AM
Discussion Twisted Hobbys - RC Factory USA YAK-55 39" Build Thread/Videos & Flight Video!!!!! cbriggs11 3D Foamies 78 May 28, 2014 06:40 PM
Discussion RC Factory USA - Twisted Hobbys - 1.2m SU 29 Build Thread. hercdriver7777 3D Foamies 97 Oct 19, 2011 07:34 AM