Lumenier RB2205C-12 2400KV SKITZO Ceramic Bearing Motor
Thread Tools
Old Oct 01, 2011, 11:33 AM
furyphoto is offline
Find More Posts by furyphoto
Posting, but should be working
furyphoto's Avatar
Discussion

DJI WK-M Feature Wish List


This is my Suggestion Box for requested features in future DJI WK-M firmware upgrades.

The goal here is for positive suggestions for improvements, No Bashing Please!

Please feel free to add. I think it is a good idea to separate between firmware updates which I would expected without additional cost, and feature upgrades that will likely be an add on.

I would like to see:

Firmware updates:
  • Motor Arm/ Disarm feature to prevent runaway failsafe in the case of accidental power up with the Tx off. Please match the current multicopter standard, throttle down and right to arm, throttle down and left to disarm
  • Failsafe upgrades - Allow user to set RTH altitude, and Hover time before descending to land.
  • The ability to save/load model settings to my computer from the WK-M assistant software.
  • The ability to select between several sets of settings on the WK-M using Tx stick commands so I can have calm, windy, settings, or separate settings for my different cameras available without having to hook up to a computer.
  • The ability to optimize with a preference to favor GPS hold, or stability in the software settings
Optional Add On:
  • A telemetry module that will overlay gps, alt, and battery information onto a video stream. Without the need for a waypoint base station.
Sign up now
to remove ads between posts
Old Oct 01, 2011, 11:37 AM
GGoodrum is offline
Find More Posts by GGoodrum
Registered User
GGoodrum's Avatar
Good idea.

I agree with all of the above, but would add one more to reduce, or eliminate the lag on the camera gimbal servo outputs. This is one area where the mk controller still excels.
Old Oct 01, 2011, 11:45 AM
sidneyw is offline
Find More Posts by sidneyw
Registered User
Subscribed.
Site Sponsor
Old Oct 01, 2011, 11:47 AM
furyphoto is offline
Find More Posts by furyphoto
Posting, but should be working
furyphoto's Avatar
Quote:
Originally Posted by sidneyw View Post
Subscribed.
Thanks for watching Sidney!
Old Oct 01, 2011, 12:42 PM
Photoship One is offline
Find More Posts by Photoship One
by Alary Design
Photoship One's Avatar
I'd like to see a 'motor test' functionality in the Assistant software. Similar to how MK does it. It will allow you to select a motor and run it at a low power to verify the proper motor/esc is connected into the correct port and also verify rotation of the motor is the correct direction. Having to turn them all on at once is dangerous to do in the shop on a workbench.
Old Oct 01, 2011, 08:40 PM
hexa is offline
Find More Posts by hexa
Registered User
hexa's Avatar
LED light strip option, and Graupner telemetry
Old Oct 01, 2011, 09:30 PM
DJI Terry is offline
Find More Posts by DJI Terry
Registered User
Thanks for your post.
We will discuss with R&D regarding all the suggestions.
Site Sponsor
Old Oct 02, 2011, 11:08 AM
redridinghood is offline
Find More Posts by redridinghood
Registered User
A heading hold of some sort. The ability to fly always facing one direction.
Old Oct 02, 2011, 12:11 PM
rallymatt is offline
Find More Posts by rallymatt
Registered User
rallymatt's Avatar
Quote:
Originally Posted by redridinghood View Post
A heading hold of some sort. The ability to fly always facing one direction.
It does that now.
Old Oct 02, 2011, 12:45 PM
redridinghood is offline
Find More Posts by redridinghood
Registered User
Quote:
Originally Posted by rallymatt View Post
It does that now.
Carefree was the term I was looking for.
Old Oct 03, 2011, 03:41 AM
Picasso1 is offline
Find More Posts by Picasso1
Registered User
Quote:
Originally Posted by redridinghood View Post
Carefree was the term I was looking for.
I am too. When one time use CF, you will ever have.

Frank
Old Oct 08, 2011, 06:04 AM
freebyte is offline
Find More Posts by freebyte
Who dares wins
Quote:
Originally Posted by Photoship One View Post
I'd like to see a 'motor test' functionality in the Assistant software. Similar to how MK does it.
++!
Old Oct 08, 2011, 06:20 AM
Connexxion is offline
Find More Posts by Connexxion
Nemo in a blender
Connexxion's Avatar
"The ability to select between several sets of settings on the WK-M using Tx stick commands so I can have calm, windy, settings, or separate settings for my different cameras available without having to hook up to a computer."

I like this one the most.

Have it on my MK and use it almost everyday.

How about a wireless connection (bluetooth)between laptop and FC?
Old Oct 08, 2011, 06:28 AM
Dolby is offline
Find More Posts by Dolby
Needs more bacon!
Dolby's Avatar
Ignore... didn't read first post. Arm / Disarm feature already requested
Old Oct 08, 2011, 07:41 AM
hexa is offline
Find More Posts by hexa
Registered User
hexa's Avatar
Auto lipo 3s 4s configuration, ppm sum for UHF guys


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
New Product DJI WooKong-M Autopilot System for multirotors **Owners Thread** DJI INNOVATIONS Multirotor Electronics 20286 Nov 28, 2016 05:40 PM
Discussion DJI WK-M - Droidworx Hex Build Huddo Multirotor Talk 41 Dec 31, 2011 08:58 AM
Discussion Obscure/Rare Wish List Psycho Synapse Foamy EDFs 16 Aug 18, 2011 02:32 AM
Discussion DJI Ace One heli auto pilot auto take off feature sidneyw Aerial Photography 5 Jul 08, 2011 08:24 AM
Cool Your "wish list" wise guy Electric Plane Talk 28 Mar 23, 2011 09:24 PM