Thread Tools
Sep 26, 2011, 09:06 PM
Registered User
stilv's Avatar
Discussion

DJI-M controller on x650 Frame (build up)


now ESC and motors, which would you get for this type of setup ?

Build up Starts post 14+ w/ pics
Last edited by stilv; Sep 29, 2011 at 11:25 PM.
Sign up now
to remove ads between posts
Sep 26, 2011, 09:08 PM
Registered User
stilv's Avatar
load will be 1pound or less video cam w/ FPV setup
Sep 26, 2011, 09:22 PM
Z06 Tony's Avatar
The Avroto M2814-11S Short Shaft 770KV motors are good and will work. You can use 25a ESC's. John sells the motors but everyone is out of stock right now till Oct 10th.
Sep 26, 2011, 09:47 PM
Registered User
stilv's Avatar
what you think of these? http://montorc.com/cobrac-281420brushlessmotor.aspx
Sep 26, 2011, 10:05 PM
Z06 Tony's Avatar
They look like they put out more watts and are supposed to be good motors. Maybe someone will chime in that have used both motors.
Sep 27, 2011, 12:02 AM
Registered User
Quote:
Originally Posted by stilv
Just to let you Know you will have to move the Shaft on those Motors.
So they would not be plug and play for UAV Applications.
-John W.
Sep 27, 2011, 03:06 PM
Registered User
stilv's Avatar
what you think is a good motor/esc ?
Sep 28, 2011, 05:58 PM
Registered User
stilv's Avatar
also i like to see some images x650 and DJI setup, wondering where to put the gps
Sep 28, 2011, 09:43 PM
Registered User
Quote:
Originally Posted by stilv
now ESC and motors, which would you get for this type of setup ?
depends on the camera, simple gopro setup or heavier point and shoot or camcorder?
Sep 28, 2011, 10:00 PM
Registered User
what are planning on lifting with the x650 frame will not take too much weight at all
Sep 28, 2011, 10:05 PM
Z06 Tony's Avatar
Quote:
Originally Posted by dckiteboards
what are planning on lifting with the x650 frame will not take too much weight at all
Where did u find that info? What is too much weight? I wasnt aware of a big weight limitation on the X650 frame.
Sep 29, 2011, 12:20 AM
Registered User
fajar's Avatar
Quote:
Originally Posted by Z06 Tony
Where did u find that info? What is too much weight? I wasnt aware of a big weight limitation on the X650 frame.
+1. This vendor tested the frame to lift AUW 2.5 kg. Should be just fine for gopro and fpv stuffs.
Sep 29, 2011, 05:20 AM
Registered User
Will the ESC's fit in the provided space on inthe arms?

Interesting setup;
Sep 29, 2011, 11:15 PM
Registered User
stilv's Avatar
swapping out the motors and esc later, just want get it built and setup.
Sep 29, 2011, 11:19 PM
Registered User
stilv's Avatar
cam i will be using is: PowerShot ELPH 300 HS 12.1-Megapixel Digital Camera

w/ FPV


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
New Product DJI WooKong-M Autopilot System for multirotors **Owners Thread** DJI INNOVATIONS Multirotor Drone Electronics 20299 Apr 12, 2017 06:23 PM
Cool Karbonic-XXL 50CM DJI WooKong-M frame superdave42 Multirotor Drone Talk 12 Mar 09, 2012 10:01 AM