Shop our Airplanes Products Drone Products Sales
Thread Tools
Old Sep 25, 2011, 01:54 PM
Dennis Sumner is online now
Find More Posts by Dennis Sumner
Wanted for breaking Ohm's Law
Dennis Sumner's Avatar
Build Log

LoPresti Fury (Globe Swift)


I came across the Lopresti Fury a while back and always liked the Globe Swift so I decided to try and capture the Fury in 1/7 scale.

A little history of where the LoPresti Fury came from. The following is from the Lopresti Fury website; Loprestifury.com "The LoPresti family owns the Fury design and the prototype. Roy left behind the plans, the tooling and even the bill of materials with every nut and bolt specified. More importantly Roy left behind a family of aviation engineers. Curt LoPresti heads the family business "Speed Merchants". They are known as the premier go-fast aviation company which "re-engineers" the designs of others. Speed Merchants is the place aviators go to when they need more you know what. (Speed!)" Work started back in 1990 and they continue to fine tune the design today.

My model will have a 50" span and have about 385 square inches. I will be using a Scorpion 3014-1040Kv motor, Ice 50Amp esc and E-Flite 15-25 85 degree electric retracts.

Here are some pictures of the real one. I just found out that they are in process of repainting the Fury. I believe the new paint scheme will have the current scheme inverted, what is now yellow will be red and what is red will now be yellow.

Denny
Last edited by Dennis Sumner; Sep 26, 2011 at 10:39 AM.
Sign up now
to remove ads between posts
Old Sep 25, 2011, 01:57 PM
Dennis Sumner is online now
Find More Posts by Dennis Sumner
Wanted for breaking Ohm's Law
Dennis Sumner's Avatar
Here are the fuse formers and firewall. The fuse sides will be 1/16 as well as wing sheeting....
Old Sep 25, 2011, 02:02 PM
Dennis Sumner is online now
Find More Posts by Dennis Sumner
Wanted for breaking Ohm's Law
Dennis Sumner's Avatar
The tail feathers will be 3/16 balsa and I will cut the stab in half and glue at the 16 degree dihedral after shaping and hinging.

The cowl is built up from layers of 1/4 balsa assembled on 1/8 music wire rods.

I will post more pictures when the build gets underway.

Denny
Old Sep 25, 2011, 03:02 PM
rickhensley is offline
Find More Posts by rickhensley
GliderPilot
rickhensley's Avatar
Nice plane and will watch this one. Do not often see this one modeled.
Old Sep 25, 2011, 03:36 PM
raipe is offline
Find More Posts by raipe
Registered User
raipe's Avatar
Way cool!

Thanks a lot for sharing. The Fury is the sexiest GA aircraft I've seen.

Here's a great read from The pilot Corkey Fornof:
Plane talk
Lots of great info on the plane among other stuff.


raipe
Old Sep 25, 2011, 04:51 PM
GeoffinIN is offline
Find More Posts by GeoffinIN
Two left thumbs
The Swift is an elegant looking plane in stock configuration, and the mods don't seem to detract from it. Great choice!

Geoff
Old Sep 26, 2011, 04:19 AM
OzparkPilot is offline
Find More Posts by OzparkPilot
Watts up ?
OzparkPilot's Avatar
sub`d !
Old Sep 27, 2011, 05:19 PM
Dennis Sumner is online now
Find More Posts by Dennis Sumner
Wanted for breaking Ohm's Law
Dennis Sumner's Avatar
I've made some progress on the fuse...I cut the two sides out of 1/16 balsa and located the firewall, F1, F2, F3, and F4. I also glued the additional 1/16 sheet which will form the turtle deck. The triangle stock, wing saddle doubler, and 1/4 square have also been added.

Denny
Old Sep 27, 2011, 05:26 PM
Dennis Sumner is online now
Find More Posts by Dennis Sumner
Wanted for breaking Ohm's Law
Dennis Sumner's Avatar
Building up the fuse;

Here I have the top view of the plan with center line highlighted and the fuse sides and firewall and formers positioned but not glued.

I made sure everything was squared up then glued the F2, F1 and finally the firewall. Note the top of the 1/4 square is 0-0 so by shimming the fuse until the 1/4 square is at 0-0 you can then use a triangle to make sure thrust is 0-0 and by sighting down on the top view make sure I am not building any left thrust!

Denny
Old Sep 27, 2011, 08:03 PM
BluIIs is offline
Find More Posts by BluIIs
Registered User
Subscribed and fascinated. I love that little Swift!
Old Sep 27, 2011, 08:07 PM
OzparkPilot is offline
Find More Posts by OzparkPilot
Watts up ?
OzparkPilot's Avatar
Quote:
Originally Posted by raipe View Post
Way cool!

Thanks a lot for sharing. The Fury is the sexiest GA aircraft I've seen.

Here's a great read from The pilot Corkey Fornof:
Plane talk
Lots of great info on the plane among other stuff.


raipe

Great stuff... Corkey was the Pilot flying the BD-5 though the hanger in James Bond Octopussy film !
Old Sep 28, 2011, 04:03 AM
raipe is offline
Find More Posts by raipe
Registered User
raipe's Avatar
Great progres! Do you have a 3-view or what are you using as a plan?

Quote:
Originally Posted by BingWing View Post
Great stuff... Corkey was the Pilot flying the BD-5 though the hanger in James Bond Octopussy film !
Among other cool movie stunts

raipe
Old Sep 28, 2011, 06:05 AM
Dennis Sumner is online now
Find More Posts by Dennis Sumner
Wanted for breaking Ohm's Law
Dennis Sumner's Avatar
Raipe,

I am working from my plans developed from a 3 view. I drew it up in CAD and had the formers, ribs, etc laser cut.

Denny
Last edited by Dennis Sumner; Sep 28, 2011 at 06:06 PM.
Old Sep 29, 2011, 07:06 AM
raipe is offline
Find More Posts by raipe
Registered User
raipe's Avatar
Quote:
Originally Posted by dsumner View Post
Raipe,

I am working from my plans developed from a 3 view. I drew it up in CAD and had the formers, ribs, etc laser cut.

Denny
I had a hunch about laser cutting when I looked at the pics, good work. Did you use a Swift 3-view or do you have one for the Fury. I have never seen one and trust me I've searched

Keep up the good work
raipe
Old Sep 29, 2011, 07:59 AM
Dennis Sumner is online now
Find More Posts by Dennis Sumner
Wanted for breaking Ohm's Law
Dennis Sumner's Avatar
Raipe,

Here's what I started with....

Denny


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Globe Swift R. Green Scale Kit/Scratch Built 19 Jan 10, 2016 07:19 PM
Help! Looking for Plans? Globe Swift 1946 Ken Park Scale Kit/Scratch Built 18 Oct 06, 2009 04:47 AM
JDM GLOBE SWIFT-Ready for Maiden tahoecrest Parkflyers 25 Nov 08, 2004 12:41 PM
FS: Globe Swift with retracts hole digger Aircraft - Electric - Airplanes (FS/W) 3 Oct 19, 2004 06:57 PM
Motor Suggestion for Globe Swift? RCFlybry Parkflyers 4 Nov 12, 2002 02:16 PM