Spruce Goose and Anderson Kingfisher Videos - RC Groups
Thread Tools
Sep 15, 2003, 02:26 AM
Registered User
Martin Lagerstedt's Avatar

Spruce Goose and Anderson Kingfisher Videos

Here are some Videos of my own 1/40 scale Spruce Goose and my fathers 1/4 scale Anderson Kingfisher.

Spruce Goose page: http://w1.877.telia.com/~u87708929/goose.htm

Anderson Kingfisher:
http://w1.182.telia.com/~u18215169/Kingfisher.wmv 5,8MB

Martin Lagerstedt
Sign up now
to remove ads between posts
Sep 15, 2003, 12:52 PM
Registered User



Great video of the goose takeoff, flight and landing. That right turn on the second time round looked scary (thought you were going for aerobatics ) but nice recovery. Must also give you a start when one of the wing floats digs in but the Goose is obviously built to take it.

Thanks for sharing.

Apr 16, 2004, 02:45 PM
Registered User
Here is a picture I took last year at a float fly, I hope I posted it right I have never done this before.

Nov 05, 2007, 05:02 AM
Registered User

I have a slightly scaled down kingfisher which now flies ok except it wouldn't flare out when the engine had stopped resulting in it flipping over on the second flight having removed all the lead from the front, it was diving when throttled back had to put the power back on to land it.

Is your similar and if so what did you do about it?

There seems to be plenty of elevator movment it just dosn't seem very effective.

My thoughts are that the whole tail section needs sheeting and possibly increasing in surface area as it is all a bit flexible.