Thread Tools
Sep 17, 2011, 03:50 PM
DiaLFonZo - UAV/Drone
Dialfonzo's Avatar
Thread OP
Discussion

DiaLFonZo - MiniY6 - V1.0 - Online at www.MyRcBuild.com


EDIT:
Now available at www.MyRcBuild.com
HERE
Big tanks to the owner of myrcbuild.com and "Cutter" of the project. "LUIS" ..


Hi all,

As some people ask me about a small Y6 version of my quad, i have started to brain storm with them and now i move all that to the proper thread...

Here is what it look so far:



High Res: Here and Here

This is measure with HK 10g
https://www.hobbyking.com/hobbycity/s...idproduct=5358

I want to know witch motor people want to use and the hole patern.

For controller there is 2 mounting hole right now 30mm and 45mm

Feel free to ask anything..


---------------------------------------------
18 October 2011

Here are some Picture i took of the thing today







Some new pictures with Paris V4.0 board (WM+ and Nunshuck)


High Resolution
Here and Here


High Resolution
Here and Here


High Resolution
Here and Here
Last edited by Dialfonzo; Oct 18, 2011 at 09:30 AM.
Sign up now
to remove ads between posts
Sep 17, 2011, 03:57 PM
Registered User
nasgul's Avatar
lol, nice, feel a little bad contaminating the quad thread with all the y6 questions, so a proper thread is genius!
the 45mm controller holes is for kk board, and 30mm for cc, yes?
do you think the u/c will be stable enough?
Sep 17, 2011, 04:09 PM
DiaLFonZo - UAV/Drone
Dialfonzo's Avatar
Thread OP
Quote:
Originally Posted by nasgul
lol, nice, feel a little bad contaminating the quad thread with all the y6 questions, so a proper thread is genius!
the 45mm controller holes is for kk board, and 30mm for cc, yes?
do you think the u/c will be stable enough?
I only have MultiWii based board.
Most of them have a 45mm footprint.

Sorry for that but i don't know what you mean by "u/c".

(Englis is not my first language.. lol)
Sep 17, 2011, 04:12 PM
Registered User
nasgul's Avatar
sorry eric, u/c short for undercarraige, or landing gear if you prefer. measured my kk board, 45mm holes on it, so all good
Sep 17, 2011, 06:05 PM
My RC builds in my profile.
daign's Avatar
looks great I may be grabbing a quad from you soon!
Sep 18, 2011, 06:16 AM
DiaLFonZo - UAV/Drone
Dialfonzo's Avatar
Thread OP
Quote:
Originally Posted by nasgul
sorry eric, u/c short for undercarraige, or landing gear if you prefer. measured my kk board, 45mm holes on it, so all good
Yes it have ton of u/c space...!
The "Prop" are draw at 45mm from motor mount. To see if they clear the ground.
And i will post another picture showing how much space is left from the prop to the ground.
Sep 18, 2011, 06:22 AM
Registered User
nasgul's Avatar
nice one eric, look forwards to checking that out when i get back from work, lol
Sep 18, 2011, 06:50 AM
DiaLFonZo - UAV/Drone
Dialfonzo's Avatar
Thread OP
Ok... Here it is..

I can even make the landing Sorter...

The second picture is the "Lock" that i have think for the landing.. is it clear enough ?
Sep 18, 2011, 07:51 AM
flying beam
blackmoon's Avatar
Yup LG shorter is a plus, for me.

I'm going to use these babies in my next build (a friend has them in his micro quad and they are a blast).

https://www.hobbyking.com/hobbyking/...dProduct=14739

M2M lentgh ?

(Vraiment une super frame, elle sera super sur mon Y4, j'adore )

Thx
Sep 18, 2011, 07:58 AM
DiaLFonZo - UAV/Drone
Dialfonzo's Avatar
Thread OP
Quote:
Originally Posted by blackmoon
Yup LG shorter is a plus, for me.

I'm going to use these babies in my next build (a friend has them in his micro quad and they are a blast).

https://www.hobbyking.com/hobbyking/...dProduct=14739

M2M lentgh ?

(Vraiment une super frame, elle sera super sur mon Y4, j'adore )

Thx
Merci...
Les moteurs que tu as postÚ sont vraiment bon ?
Je recherche qqch pour remplacÚ les 10g que j'ai...
C'est plus gros, vous avez fait des test de consomation ?

Ok.. if nobody complain about lower landing gear, i will make the change..
Sep 18, 2011, 11:15 AM
flying beam
blackmoon's Avatar
The motor I listed is very good with 8x4 props.

I saw in your post here https://www.rcgroups.com/forums/show...&postcount=259, that M2M will be +/- 20 cm.

A little short for 8x4, I think if you scale it a little (maybe 23-25 cm M2M) we'll have more choice in different engine/props combos.

If not, I'll go with the 10gr on this frame, because I really want a mini Y4 .
Sep 18, 2011, 11:21 AM
DiaLFonZo - UAV/Drone
Dialfonzo's Avatar
Thread OP
8" prop will not do it.. LOL

If you want a Y4 with 8" prop you could look at that one:
https://www.rcgroups.com/forums/show...6&postcount=35

You should have lot more distance between prop i think.. even make it wider... will need much wider.

No ?
Sep 18, 2011, 12:42 PM
flying beam
blackmoon's Avatar
Quote:
Originally Posted by Dialfonzo
8" prop will not do it.. LOL

If you want a Y4 with 8" prop you could look at that one:
https://www.rcgroups.com/forums/show...6&postcount=35

You should have lot more distance between prop i think.. even make it wider... will need much wider.

No ?
I didn't make any calculation just did think it would pass with 25cm M2M.

Thank you for the link, I'll maybe go with that one for the motors I listed.

And keep this one for the 10gr, I have for of them buggers waiting in my box
Sep 18, 2011, 03:41 PM
Registered User
nasgul's Avatar
Quote:
Originally Posted by Dialfonzo
Ok... Here it is..

I can even make the landing Sorter...

The second picture is the "Lock" that i have think for the landing.. is it clear enough ?
looks good to me eric, should hold good! only just got in from work, lol!
Sep 18, 2011, 04:56 PM
Needs more bacon!
Dolby's Avatar
I like the leg length you show above but as long as it works with the HK 10g with prop adapters making them shorter is fine with me.


Quick Reply
Message:

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion DiaLFonZo - QuadMini & TriMini Dialfonzo Multirotor Drone Talk 745 Mar 24, 2015 10:22 AM
Discussion DiaLFonZo-Copter TrinitY Quad V2.0 Dialfonzo Multirotor Drone Talk 316 Mar 12, 2012 04:46 AM