Help me design a micro flying wing - RC Groups
Thread Tools
Sep 16, 2011, 11:55 PM
Registered User
Help!

Help me design a micro flying wing


Hi everyone,
I am a UM guy who is really really interested in making my own flying wing. Can you guys help make some recommendations for me? Here is my criteria:
  • Budget friendly
  • Small enough that I can run 2S 180mah battiers (from my UMX Beast)
  • Compatible with my Spektrum DX6i
  • Did I mention cheap?

I am really not sure where to begin with this design. Thanks in advance for any advice.

Joshua
Sign up now
to remove ads between posts
Sep 17, 2011, 04:45 AM
Registered User
If you have a Beast power system, just cut out a flat piece of depron. No airfoil needed. Example: http://www.lazertoyz.com/shop/Lazer.html
Sep 17, 2011, 08:29 AM
Registered User
The 16" David wing would work well also. There are free plans on that thread.
Sep 17, 2011, 10:41 PM
Just an average RC'er
Jim McPherson's Avatar
This one flys well for me and is flyable by a spektrum radio. https://www.rcgroups.com/forums/show...&postcount=425
Sep 18, 2011, 11:28 AM
Registered User
Thanks for the advice everyone. I made it over to the 16" David thread and totally got hooked up there. That is just what I was looking for...


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Help me choose a flying wing cloudbuster FPV Talk 22 Sep 24, 2011 10:20 PM
Discussion Help me choose my next wing. bluemeane Flying Wings 2 Sep 10, 2011 04:17 PM
Discussion formulae for flying wing design? robwilkinson Slope 31 Apr 18, 2011 06:03 PM
Discussion Please help me determine size and prop of Flying Wing dtrip Foamies (Scratchbuilt) 4 Mar 10, 2011 03:32 PM
Micro Flying Wing Design Advice mharms Flying Wings 2 Jul 06, 2005 05:47 PM