Thread Tools
Sep 14, 2011, 03:40 PM
Registered User
Thread OP
Discussion

If you had an Eflite Power 10 what would you put it in?


I have an Eflite Power 10 motor and a Hobbywing 40A speed controller and I'm trying to decide what to throw this combo in. Any suggestions?

Thanks!

Tommy
Sign up now
to remove ads between posts
Sep 14, 2011, 03:51 PM
Registered User
Well, what type of flying ya want to do? currently I have a power 10 in my PZ P-47(airframe only) and with a APC 10x7 it fly's nicely. Had another P10 on my Funcub... WAY to much power IMHO and a little heavy for this plane... if ya want to hover and go straight up for ever then it's fine Put that same P10 on a Dynam 1270mm t-28 again using an APC 10x7... another nice flying plane
Sep 14, 2011, 03:59 PM
Registered User
Thread OP
Well I have to admit that I mostly fly helis and have several ranging from 450 size to a 700. I have one plane currently (the Electrfly Cirrus SR22 Turbo) but would like another and I have this combo sitting around that I would like to throw into something. Does that help?

Thanks!

Tommy
Sep 14, 2011, 04:38 PM
Registered User
Quote:
Well I have to admit that I mostly fly helis and have several ranging from 450 size to a 700. I have one plane currently (the Electrfly Cirrus SR22 Turbo) but would like another and I have this combo sitting around that I would like to throw into something. Does that help?

Thanks!

Tommy
Quote:
Does that help?
Not really... I fly heli's myself... 250, 450(several of each) and a tricopter for electric and a 30 size nitro

for planes my interest goes from lazy floaty planes to 3D to scale... I have a little bit of everything

The SR22 is more sport/scale... that what ya want? or maybe something a little more aerobatic/3D? maybe something to just putz around the sky?

Funcub is a all around good choice... it's sporty,lazy,STOL and stand off scale all in one! the problem using the P10 is CG... it still flys nice with the bigger motor... just a bit heavier(less floaty) than it can be with the extra weight of the motor and the lead you need on the tail to counter it... PLENTY of power though
Sep 14, 2011, 04:53 PM
Idiot Savant
ptgarcia's Avatar
I would put it in my Goldberg Pitts Monster that's been sitting in the shelf for 3 or 4 years now.
Sep 15, 2011, 08:22 PM
Registered User
Thread OP
I was thinking it might be kinda fun to have something that I can bring out to the lake with my boat and take off / land from the water. Maybe a little Piper Cub with floats? Do they make something like this for this size motor?

Tommy
Sep 15, 2011, 09:07 PM
Registered User
Multiplex funcub!!! I have a monster power 10 in mine and it literally jumps off the water. I fly mine off my boat out behind my house. It's also big enough to handle the wind.
Sep 17, 2011, 07:20 PM
Registered User
JIMBOJONES's Avatar
A 40ish inch extra would be one of the firsts on my lists


Quick Reply
Message:

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Poll What jet would you most like to see in an upcoming J-Power/Skyangel mini-jet release? herk1 Foamy EDFs 26 Oct 25, 2016 02:08 PM
Sold GAUI 2-4 Cell 12A BL ESC #923122 NIP can put leads on 4 you if needed blueindian Aircraft - Electric - Helis (FS/W) 1 Sep 10, 2011 09:46 AM
Help! if you had choice which little heli would you buy? gaz1969 Coaxial Helicopters 30 Jul 22, 2011 06:20 PM
Discussion What would YOU put in this? (and other questions) Barbosa2 Electric Power Systems 20 Apr 15, 2011 05:14 PM
If you had a Mega 16/15/2 handy, what would you do with it? Hankstone Electric Power Systems 6 Apr 10, 2003 10:34 AM