HK 90mm BAE Hawk Build Thread! - Page 2 - RC Groups
Thread Tools
Oct 31, 2011, 10:31 PM
It should fly at least once
clive45's Avatar
And we thought you would not notice
Sign up now
to remove ads between posts
Oct 31, 2011, 10:39 PM
Registered User
Patience is a virtue ....... waiting is a pain in the aileron
Oct 31, 2011, 11:23 PM
Registered User
And the HK Hawk is the same plane as the NitroPlanes T-45...If you want to see a build thread then just look at the CMP NitroPlanes T-45 thread.......

Kevin
Nov 01, 2011, 08:33 PM
MAAC SAVED RC!!
vettster's Avatar
Yeah I noticed that too. Dont care...i like CMP
Nov 01, 2011, 09:24 PM
Registered User
Quote:
Originally Posted by vettster
Yeah I noticed that too. Dont care...i like CMP
I like CMP too!!!...I'm working on my T-45 as we speak...I can't believe how much plane you get for so little $$$---I'm happy and looking forward to many flights..

Kevin
Nov 02, 2011, 03:14 AM
It should fly at least once
clive45's Avatar
Any one know if the pilots have turned up yet or do they work for QANTAS
Nov 02, 2011, 07:57 AM
Registered User
lipoflyer's Avatar
Quote:
Originally Posted by Pilot_Tony
. The one I'm after is the UK demo team version ine the link above.
Stunning! Cant be long as they had quite a few planes in that review. the g500 has just been stocked in the US warehouse
Nov 02, 2011, 09:51 AM
Registered User
Quote:
Originally Posted by clive45
Any one know if the pilots have turned up yet or do they work for QANTAS
ohhh harsh...

They haven't turned up because the potato munching cowboy joyce has locked them out!

Thanks

dave
Nov 22, 2011, 03:34 AM
Registered User
Blackcataircraft's Avatar

HK Bae 90mm Hawk


Guy's I have one it is fibreglass with built up wings. The kit is finished of beautifully, how ever she does carry a bit of weight and you will need to really plan it out. I have a jetfan 90 with a Het 700-68 running 8s to which is coming from Extremerc in Oz. The problem I have now is i dont have the retracts as they ran out. Unknown as to when they will be back in stock. The ducting is great everything fits nicely without too much stuffing around. There are a couple of things that I have changed on her. i would trust the push rods they supply, I'm going with carbon. The canopy is screwed on so that got cahged I placed 2 pieces of ply under the front and a solid block at the rear with a hatch latch. There are 2 small pieces of alloy for the mounting of the wing to go into the fuselage, however where they have cut the slot it's been made to big so I had to cut a small piece of hardwood in to make it a tight fit. The pilots are not to scale and i ahd to trim down the rear so I could get his helmet of the canopy, also had to trim some of the sides so they could sit in straight. Need to epoxy / microfill the gaps around the inlet and the ducting tubes. no biggy. It doesn't come as stated in Scott's sneak peak video, eg drop tank fixed undercarriage, so I'm a little disappointed. The instruction manaul isn't great deal of help as it doesn't have a check list as you get with other kits, the C of G is out so they can't have flown it before going to market.
Last edited by Blackcataircraft; Nov 22, 2011 at 03:44 AM.
Nov 22, 2011, 07:59 AM
Commercial UAV Pilot
I have sent an e-mail to the factory today with regard U/C, etc as a few people have said they were missing. As for C of G, they said they HAD flown it and thought it was ok....well, if you dealt with these factories as I do, you wouldn't be very suprised to hear that...they were told to get it changed.
Nov 22, 2011, 08:34 AM
Registered User
Gaz-b's Avatar
How is your Hawk build coming along Scott.as a matter of interest what CG will you be using.
Nov 22, 2011, 09:07 AM
Commercial UAV Pilot
Mate, not even started it yet...like everyone else, starting at 105mm.
Nov 22, 2011, 10:28 AM
The Sarawak KoloMee
SniperWj's Avatar
Quote:
Originally Posted by phoenix racing
I have sent an e-mail to the factory today with regard U/C, etc as a few people have said they were missing. As for C of G, they said they HAD flown it and thought it was ok....well, if you dealt with these factories as I do, you wouldn't be very suprised to hear that...they were told to get it changed.

mine dont come with wheel well too
Nov 22, 2011, 12:30 PM
A Texan abroad
torque roll's Avatar
Yups. The undercairage is pretty important.
Nov 22, 2011, 03:17 PM
You win again gravity!
SMorrisRC's Avatar
Mine came today. It's my Christmas present, so can't play with it yet....just a quick check for damage. All arrived in perfect condition, she's a real looker, but as mentioned no drop tank / fixed gear / wheel wells or doors. Don't mind about the tank / gear but, as ill be going the retract route, could really use the wells and doors. Sure hope HK comes good with the missing parts, its a beautiful bird.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Build Log Jet Teng Models Full Composite 90MM Bae Hawk V2 From RC-Warbirds Build & Video's FlyBoyTha1 Electric Ducted Fan Jet Talk 701 Mar 23, 2015 07:32 PM
For Sale Jet teng 90mm Bae Hawk swiss rtf newly assembled $1500 jetfan20 Aircraft - Electric - Jets (FS/W) 1 Jun 05, 2011 03:00 AM
Discussion is there a build thread somewhere on the fly fly bae hawk ? aviador Foamy EDFs 1 Feb 04, 2008 10:42 PM
Question Build thread on BAE Hawk nitro models/raidentech? EDF Guy Electric Ducted Fan Jet Talk 12 Apr 09, 2007 04:44 PM
CJM BAE Sport Hawk build thread gregg f Electric Ducted Fan Jet Talk 26 Jan 28, 2006 01:55 PM