Originally Posted by davylah
Hey Joe, I'm considering fitting 2 x 7.4v 2200mAh 45c burst packs. If I connect these in series, am I right in thinking it will give 14.8v 2200mAh 99A burst? If so, I'm planning on modifying the fan cover so I can install the 2 7.4v packs, one either side of the fan unit. This will bring the c of g into limits without adding any extra weight. Please could you tell me what your elevator and aileron throws are too please?
Hi Dave, I don't know your power system but start with slight more in your control travels. I use some 7-10mm on AIL and 15-18mm on EL should be plenty for lighter model.
Hooking it up in series still gives you the same 45C rating. That makes good sense to place both batt. in regards of CofG, if it is practical for easy installation, just make sure they are well secured in place, good luck with your flight your model came up great and I'll fly mine on 15th as well thinking of you, (weather permitting) Joe., (pics of my full travel)