So any other Flyguy pilots going to NEAT? Mr. Incredible will be there.

Put on a good show!

Got my new home for the CNC machine yesterday ...
https://www.rcgroups.com/forums/show...&postcount=370

Bob

Nice trailer. Enjoy it!

Thanks,

I'll be in striking distance for NY :-)

Bob

Here's a video shot and edited by Treggon Owens.

http://youtu.be/nTd4LD47mLU?hd=1

Can't find Fly Guy 46 inch tiled pdf

use Adobe X to print a full sized pdf Tiled.
It has options for paper size , hash marks for alignment etc.

Bob

Nice video Otto .. I love to fly at Carlsbad, both at the beach and the dog walk field by the R.R. tracks. Heres that video link imbedded

Fly Guy Green Lantern flying at Daves Beach in Carlsbad, CA (1 min 22 sec)

My Flyguy should be on the NEAT fair video for this year. I showed him to Scott at SKS and his comment was "Don't crash it until I get some video!". We filmed Thursday in great weather!

Thanks Pete for carrying the flag. We're having a big FPV get together at Dave's Beach on the 29th and I plan to have my FPV, Superman and Green Lantern.

Alpea 41 Thanks for getting the Dave's Beach video up.

Stumbled on this thread and have been reading for a few hours now. Looking to build the 62" version and have a motor question. You mentioned that you had built one version with a 400w motor. Can you recommend a motor brand/part # and prop for the more powerful version?

I currently have the motor below for a future sailplane project and was wondering if it would work and what prop you would suggest..
Power 25 BL Outrunner Motor, 870Kv
by E-flite (EFLM4025A)

I have a E F Power 25.. I'm not sure but I think it's heavy and too low of a Kv for the size prop that fits a 62" fly guy. It probably would do the job, I seem to remember it recommends a 10 or 11" prop.
Otto or Bob probably know better than me. The 42" fly guy needs a 7" p[rop

Does anyone have a motor/prop combination that has worked if you plan on increasing the power system for the 62" version? I see the recommendation from the build thread stating the Parkzone F4u or T-28 900kv motor at 200w, but was wondering what would be a good upgrade for a motor with more watts.

Originally Posted by Pearless

Does anyone have a motor/prop combination that has worked if you plan on increasing the power system for the 62" version? I see the recommendation from the build thread stating the Parkzone F4u or T-28 900kv motor at 200w, but was wondering what would be a good upgrade for a motor with more watts.

I'm flying a Scorpion 3014, 1200kv on mine with a 40 amp esc. I cut down a Parkzone Bf-109 3 blade prop to fit inside the Flyguy body. With a 3s 2200 mah battery I pull about 370 watts wide open. I usually fly about 1/2 throttle and only wide open for vertical climbs. What you have should work but would have to be flown at a higher power setting.