What I've been up to - RC Groups
Shop our Airplanes Products Drone Products Sales
Thread Tools
This thread is privately moderated by Willsonman, who may elect to delete unwanted replies.
Sep 08, 2011, 08:58 PM
No Hangar Queens!
Willsonman's Avatar

What I've been up to

Well I've not been able to do much lately due to a lot of life stuff. The weather has been quite miserable all week here so I thought I would post what I have been working on. While it is not R/C it is scale... Not sure of it but it is.

I started with a simple paper towel tube. Add foam and a lot of elbow grease and you have a scale V-2 rocket. I made this for a friend who literally has ZERO time for his rocketry hobby. We got talking about building with composites and I told him I would build something. This is the result. I've not built a rocket in over 15 years. Looks like I still got it.
Sign up now
to remove ads between posts
Sep 12, 2011, 08:33 AM
Jack of all master of none
splinterz25's Avatar
I know this one's not electric! I ues to make these when I was a kid nice job;I've been thinking about doing some just for kix,what size engines will this bad boy be sporting?

Sep 12, 2011, 01:40 PM
No Hangar Queens!
Willsonman's Avatar
Its weight without a parachute is 5oz so a B size should be fine. C for some higher altitude stuff but a B should be a more scale take off. Longer burn time will help get more altitude. We are thinking it will need a rather short delay to reach apex and then eject the chute. I had made a 24" Parasheet style but folding it was an issue with the rather narrow body tube used. I thought I woudl give an actualy parchute design a chance and it works great but the folding issue is even worse with the seams sewn and additional fabric. I'm now thinking about two smaller parasheets so that I know I get enough drag but no bulk to restrict the body tube on ejection. Dunno.

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion What on earth is this 3d'er i've been given? Rhys Porter 3D Flying 2 Jul 07, 2011 10:44 PM
Discussion Here's what I've been up to TeeJayBee Beginner Training Area (Heli-Electric) 7 May 05, 2011 04:36 PM
Yippee! OT: what i've been up to swheels Motorcycles 7 Oct 24, 2009 01:59 AM
Data What I've been up to - not so Legal Eagle kevin matthews Free Flight 5 Sep 19, 2007 03:01 PM