Thread Tools
Sep 17, 2003, 10:16 AM
Registered User

Fokker D7


Here is another view of my Fokker D7.

Alan
Sign up now
to remove ads between posts
Sep 19, 2003, 11:11 AM
ama #18769

1/2A pic


Heres a photo (at least I hope) of some of mine. 1 House of Balsa Mustang 4 channel Super Tigre X-.11 powered. 2 Bill Evans Scimitar with Cox td .o2o. That's the blue flying wing. Has been radared at 58mph level 68 mph in a shallow dive!! 3 One Cent .010 design, fly's great a real blast at 5 ounces ready to fly. 4 Ken Willard SE-5 peanut scale .010 bipe. More a mantle piece than a flyer.
Glen
Sep 19, 2003, 10:20 PM
Registered User
Ragwing's Avatar
Beautiful airplanes guys....couldn't help but address Mlbco and Aporter: Absolutley georgous airplanes you guys have built. I worship the ground you walk on. See you around,
--Derek
Sep 20, 2003, 11:41 PM
Registered User
Here is my 1/2a pylon racer 36.5" span 21oz all up weight powered by a OS 11 PS top speed measured by radar gun 155 mph. This is my favorite racing plane to fly dont know why just like it better than my others.
Terry
Sep 20, 2003, 11:55 PM
Registered User
From above
Sep 21, 2003, 12:00 AM
Registered User
OOps wrong one you can see the wing has been moved up in the fuse this was because my wife is my lancher/caller and it is a lot easier for her to lanch like this also the white upward mark on top of the wing near the trailing edge was for the torque rods to slide through now for the top.
Terry
Sep 21, 2003, 09:27 AM
Registered User
mike50's Avatar
My Cox Black Widow powered Piece-of-Cake
Sep 21, 2003, 09:29 AM
Registered User
mike50's Avatar
A OS .15 powered Tri-Squire, a Cox Black Widow powered Q-Tee and a Cox TeeDee .049 powered House of Balsa Mustang.
Sep 23, 2003, 02:06 PM
Registered User

First Gullows conversion - Triplane


This is an old photo of my first Gullows conversion. I retouched my friends hand out of the photo. It flew just find with a TD 0.020. My subsequent conversions were more scale. It came in at about 8.5 ozs.
Sep 23, 2003, 02:13 PM
Registered User

Spad XIII


This is my most recent project. The paint job was done via an injet printer. I wanted to build a model powered by my Gmark 0.030 and scratch built this from old Sterling plans. One of the great things about the Guillows and Sterling plans is that they give you patterns for all of the parts. I love these types of plans. You can also scale the models larger or smaller by zooming the plans at Kinkos.

This model came in at 10oz. Unfortunately, the Gmark doesn't pull it around very well. The Gmark is a wonderful engine but either the model needs to be lighter or I need a bigger engine.

Alan
Sep 23, 2003, 02:17 PM
Registered User

Spad XIII


Another view of my Spad with hand retouched out.

Alan
Sep 23, 2003, 02:21 PM
Registered User

Hobby Hanger Piper Cub


Here is an 0.049 Hobby Hanger Piper Cub that I built using a Norvel 0.049 with a Joker paint scheme (using monokote). The model had typical adverse yaw issues and I once put into a flat spin that I couldn't recover from. The model landed from the spin at such a low velocity that it suffer no damage whatsoever.

Alan
Sep 23, 2003, 02:22 PM
Registered User

Another view of Piper cub


Another view of my 0.049 Piper Cub.

Alan
Sep 24, 2003, 03:38 PM
1/2a Flyer!

Great 1/2a Forum!


Hello all,
Super planes! So many it will take a while to recover! Thought you may like a look at my current 1/2a, the Buzzard Buster. Cox Medallion powered, based on a older plane from the late 70's. Redone to fly better, and last. Over 100 flights now.

Remby
Sep 24, 2003, 03:51 PM
1/2a Flyer!

Another Buzzard


Another 1/2a Buzzard, 43" span , 24oz plane, flys great on Cox .049 Medallion!

Remby


Thread Tools