Lumenier RB2205C-12 2400KV SKITZO Ceramic Bearing Motor
Thread Tools
Old Sep 06, 2011, 08:29 PM
kap64 is offline
Find More Posts by kap64
Registered User
Discussion

T-Rex 600E pro servo install question


Hello all, making my conversion over to helos from boats and trucks. I just bought a T-rex 600E pro kit to compliment a highly modified nitro pro I bought from a friend of mine (still haven't flown due to learning to fly). A question on servo installation and more specifically, the elevator servo in the metal mounting bracket. All of the Align servos have a small ridge between the mounting screw holes, so the screws and servo plate do not sit flush on the servo ears, there is a small gap. Is this right? It doesn't seem to move, but it just doesn't look right. Then it tells me to use machine screws on the outside of the metal frame and self tapping screws on the inside of the same metal servo frame. Both sides have machined threads, so why would it tell me to put self tapping screws? It gives me enough machine screws to go around. I broke out the nitro pro and it's nothing like the electric. Thanks.
Sign up now
to remove ads between posts
Old Sep 06, 2011, 11:10 PM
chopper62 is offline
Find More Posts by chopper62
Registered User
First, the screw you need to mount the servo into the metal servo mount is not self tapping but rather the socket button head screw.

Finally, to get the servo plate to sit flat against the servo, you either: (1) cut away the "small ridge," or (2) enlarge the cut out in the servo plate. Most of us just trim away the ridge.
Old Sep 06, 2011, 11:41 PM
Druss is offline
Find More Posts by Druss
Registered User
Aren't there rubber mounting grommets for the servo?
Old Sep 07, 2011, 12:04 AM
chopper62 is offline
Find More Posts by chopper62
Registered User
I think he forgot to use the servo grommets.
Old Sep 07, 2011, 07:46 PM
kap64 is offline
Find More Posts by kap64
Registered User
I used them, just thought it looked weird. I reseated the servo plates and it looks better.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Sold **Align T-REX 600E Pro/700E T-plug Serial Adapter*** Rudderman98 Aircraft - Electric - Helis (FS/W) 1 Jun 12, 2011 11:07 PM
Build Log T-REX 600E PRO Assembly Step fung Large Electric Helis 3 Jun 10, 2011 03:42 PM
New Product New T-Rex 600E PRO at AlignTrexStore.com IN STOCK AlignTrexStore Hot Online Deals 1 May 19, 2011 08:21 PM
Sold Neu 1515/2.5D/FBrushless Motor For T-Rex 600E For Sale Super D Aircraft - Electric - Helis (FS/W) 0 May 03, 2011 03:16 PM