Super Clean Align Trex 450 Pro v.3 RTF or BNF w/ tools, spares etc.. - RC Groups
Thread Tools
This thread is privately moderated by HeliFlyer711, who may elect to delete unwanted replies.
Sep 04, 2011, 02:00 PM
Trader Rating: 49
♘ Heli's Lives Matter ♘
HeliFlyer711's Avatar

Super Clean Align Trex 450 Pro v.3 RTF or BNF w/ tools, spares etc..

Align Trex 450 Pro, built and dialed in to perfection. Never Crashed or abused. No signs of wear, Excellent condition.
It is the best it can be @ a 95% stock build.
This is a great setup for someone new who wants to get the whole deal in one shipment,
I cant think of anything else you would need to buy with RTF#1.
For someone more experienced but looking for quality, the BNF setup is a good choice

Comes 5 different ways, depending on how you want to buy. Heli ships with everything safe inside the case.
I'm selling the 450's to upgrade to a larger bird.

Upgrades; I added (2) .5g flybar weights near the paddles for more locked in feel & stability.
The tail is all metal except for the slider bearing sleeve and 2 scissor arms
(has Align CNC Metal Vertical Stabilizer Mount and Align CNC Metal Tail Rotor Control Arm installed)

The tail is rock solid and can be made as hard or as soft as you like. I have it in the middle right now. See Video Below.
There's also a voltage monitor mounted & wired into the Deans connector on the heli.
AR6200 RX with sat plug, 99% wireing is internal to the frame so it's a very clean finished look.
Main trims are centered on the radio and very little subtrim used for dial-in.
Setup is 12+/12- 8 to 10 degrees cyclic depending on rates.
This heli has a lot more to give for the right pilot, but can be very tame also.

1 - Set Align Hex wrenches
1 - Set Medium Align Ball link Pliers
1 - Eflite Pitch Guage
1 - 5mm Shaft CNC Swash Leveling Tool (not shown)

Accessories, Batteries and Radio
1 - Charger w/ Wall Adapter
2 - 2200 mah Lipos 25c or Greater
1 - Carry Case (Black) Heli will Ship inside
1 - Very Clean DX6i with charger & rechargable Batteries
2 - Strips Battery Velcro for Extra Lipo's
Phoenix Simulator
Original Latest Manual

2 - Flybars NIP
1 - NIP Torque Tube Front Drive Gear Set (2)
1 - NIP Feathering Shaft (2)
2 - Align Main Shafts
1 - Plastic Tail Rotor Control Arm
1 - Bag Misc Screws, Nuts, Ball links, Washers & Servo Arms
1 - Bind Plug for AR6200
2 - One Way bearing Shaft (NIP)
1 - Align Blade Holder
1 - Align Tail boom (NIP)
2 - Torque Tubes (NIP)
4 - Skid feet (Blue)
1 - Torque Tube Bearing (NIP)
1 - Vertical Stabilizer Mount with screws (Plastic)
1 - Shims for Main Shaft
1 - Set of Stock tail blades

60 second spool down times........Priceless

Video of Trex 450-Pro last flight before being packed for shipping;

$ RTF #1
$ RTF #2
$ RTF #3
$ BNF #1
$ BNF #2

All Prices Include Shipping in the ConUS and Fee's. Send Pm with questions or offers.
Last edited by HeliFlyer711; Sep 07, 2011 at 10:08 AM.
Sign up now
to remove ads between posts
Sep 04, 2011, 04:57 PM
Trader Rating: 49
♘ Heli's Lives Matter ♘
HeliFlyer711's Avatar
Now Listed;
Shipping and Fees Included w/ All Prices
Sep 04, 2011, 06:14 PM
Trader Rating: 84
Registered User
03svtsnakevert's Avatar
would you sell the align hex wrenches????
Sep 04, 2011, 06:44 PM
Trader Rating: 49
♘ Heli's Lives Matter ♘
HeliFlyer711's Avatar
Sold Thanks OG!
Last edited by HeliFlyer711; Sep 06, 2011 at 11:00 AM.

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Sold Decked out 450 BNF combo w/ heli box, lipos, spares & 4g6S RTF combo spares cheap!! blueindian Aircraft - Electric - Helis (FS/W) 0 Aug 25, 2011 03:47 PM
Sold Align Trex 450 Pro Super Combo with a ton of spares jabull Aircraft - Electric - Helis (FS/W) 5 Jul 19, 2011 04:02 PM
Sold Trex 450 Pro FBL 3G BNF w/ 3 FREE LIPOS paulpeffly Aircraft - Electric - Helis (FS/W) 1 Jul 16, 2011 10:03 AM
Sold Trex 450 Pro 3g BNF w/ 3 FREE lipos paulpeffly Aircraft - Electric - Helis (FS/W) 1 Jul 15, 2011 10:02 PM
Sold Align TRex 250 SE Super Combo BNF and spares $280 AtomicFlyer Aircraft - Electric - Helis (FS/W) 0 May 25, 2011 10:54 PM