New Turnigy Plush 10A ESC - no AVR ATmega8 anymore
As many of us noticed all recently purchased Turnigy Plush ESC (10A in particular) are a little bit different now. They have slightly bigger length of the board and are based on a totally new microcontroller, which is now SIL F334 instead of good old ATmega8.
I don't know yet if that's a good thing or not, but one thing for sure is that they cannot be modded anymore using firmware which was written for AVR (like for instance conversion to I2C instead of PWM).
Another interesting observation is that Turnigy Plush 10A and Exceed Proton (former Volcano) 10A ESC are exactly the same, I mean everything, including the board version HW1 33V2.0 and all components, as you can see on the attached pictures. The only difference is that Plush has two 5V 1A voltage regulators stacked on top of each other, giving the 2A BEC rating, and Proton has just one regulator with corresponding 1A BEC rating.
Oh, and wires are blue on Proton.
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|Discussion||HK 8-10A ESC vs. TURNIGY Plush 12amp||learn2turn||Power Systems||0||Aug 21, 2011 08:00 PM|
|Discussion||Turnigy 2730-1700 / Plush 10A ESC Question||mcav8tr||Power Systems||1||Aug 16, 2011 03:43 PM|
|Question||Anyone have any Turnigy Plush 10a ESC's they wanna sell||Z06 Tony||Multirotor Drone Talk||2||May 12, 2011 11:38 PM|
|Found||Turnigy Plush 10a ESC||Z06 Tony||Aircraft - Electric - Multirotor (FS/W)||1||May 12, 2011 05:32 PM|
|For Sale||Turnigy Plush 10A ESC - new||NorthwestWolf||Aircraft - Electric - Power Systems (FS/W)||4||Mar 15, 2010 06:50 PM|