Shop our Airplanes Products Drone Products Sales
Aug 01, 2012, 05:37 PM
3DHS 'native'
going4speed's Avatar
There are a few people who run near 60 amps on the CC 50's with no issues. YMMV.
Sign up now
to remove ads between posts
Aug 02, 2012, 12:05 AM
Fly low or fly home.
skarface's Avatar
Quote:
Originally Posted by tominator06 View Post
Here is the first watts up test with it in the edge on the ice 75 and 13x6.5. This was right after i finished building it. Had not even flown it yet.
I ran it in the shp with the ice 50 on a 13x4 apc and xoar 13x5 and the amps were good.

http://www.youtube.com/watch?v=psk7xySAmvs
That is with the 2815-1025? So you got 57A max? I will be fine then with my x-55 since mine will be around 1000kv running a 13x6.5
Aug 02, 2012, 05:39 AM
Team Hillbilly
tominator06's Avatar
Yes I think you should be fine Keith.
Aug 03, 2012, 08:11 AM
Registered User
Ohio AV8TOR's Avatar
I cut short my flying today after two packs and I saw that two of my canopy magnets came out. No signs of CA either. Anyone repair theirs before, I am wondering if CA or epoxy will be best?
Aug 03, 2012, 08:26 AM
Fly low or fly home.
skarface's Avatar
I used thick CA. This sounds like it may be a problem with some of the magnets from the factory, so everybody double check your magnets because mine were loose too.
Aug 03, 2012, 08:30 AM
3DHS 'native'
going4speed's Avatar
When I have a new plane I go over the motor box and all four magnets on the canopy with thin CA. Works a charm.
Aug 03, 2012, 08:32 AM
Fly low or fly home.
skarface's Avatar
Oh ok, I guess I'll be going over the magnets too, form now on.
Aug 03, 2012, 08:48 AM
Registered User
Ohio AV8TOR's Avatar
I always go over the balsa but never thought of the magnets so it will be on my new plane checklist now too.
Aug 03, 2012, 09:06 AM
TEAM HILLBILLY
Eagle34's Avatar
I've had several from different planes pull loose. Just make sure you get the polarity right before you CA them back in. Thick, Med, or Thin all seem to work. Yea doing this during initial build would be a good idea.
Aug 03, 2012, 10:05 AM
Registered User
SnowDog1974's Avatar
Quote:
Originally Posted by Ohio AV8TOR View Post
I always go over the balsa but never thought of the magnets so it will be on my new plane checklist now too.
Quote:
Originally Posted by Eagle34 View Post
I've had several from different planes pull loose. Just make sure you get the polarity right before you CA them back in. Thick, Med, or Thin all seem to work. Yea doing this during initial build would be a good idea.
I've had the magnets come with the canopy when I pulled it off...CA's them back on and they are good to go now.
Aug 03, 2012, 10:13 AM
Registered User
Ohio AV8TOR's Avatar
Quote:
Originally Posted by Eagle34 View Post
Just make sure you get the polarity right before you CA them back in.
Wow good catch, thanks for the suggestion.
Aug 03, 2012, 10:43 AM
TEAM HILLBILLY
Eagle34's Avatar
Quote:
Originally Posted by Ohio AV8TOR View Post
Wow good catch, thanks for the suggestion.
Yea don't ask me how I know. But it involved acetone.
Aug 03, 2012, 05:38 PM
Registered User
Ohio AV8TOR's Avatar
Got home tonight to a package from Rob at ADC. I asked him if he could cut me a smaller version the the flag from the decal package I got for him on my 87" Extra SHP for my 47" SHP and he said no problem. He did a wonderful job. In the mean time I hand cut some matching flames also on my 87" so not they somewhat match. I am happy

My 87" is on the right
Aug 04, 2012, 05:17 AM
Registered User
Ohio AV8TOR's Avatar
I always enjoy your videos on builds, thanks.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
For Sale 3DHS 47" Extra 300 SHP rdbell Aircraft - Electric - Airplanes (FS/W) 10 Jul 29, 2013 10:39 PM
Sold 3DHS 47" Extra 300 SHP Red Brand New jdrennen03 Aircraft - Electric - Airplanes (FS/W) 2 Aug 03, 2011 12:11 PM
Wanted Looking for the 3DHS 47" Extra 300 SHP - Red GlockDoc Aircraft - Electric - Airplanes (FS/W) 1 Jul 16, 2011 01:14 PM
Wanted 3DHS Red Extra SHP v3 47" Cowl gms Aircraft - General - Miscellaneous (FS/W) 0 Apr 19, 2011 09:59 PM