Thread Tools
Aug 28, 2011, 11:19 AM
qwerty1000's Avatar
Discussion

F15E-Tetris, Bukvorez, 1800mm project.


Hi everyone!
Responses modelers yielded results. Draw, cut, glued.
Started F15E, length 1800mm, 86-98mm impellers. Estimated weight to 500gramm.
In this project, chose a slightly different approach to internal cutouts.
It is easier to form a canal impellers for different tasks.
Modeler has the ability to draw on occasion,
so the result is not quickly show promise.




Sign up now
to remove ads between posts
Aug 28, 2011, 11:40 AM
You win again gravity!
SMorrisRC's Avatar
Any chance of a 64mm - 70mm version?? (~1000mm-1200mm length)????
Aug 28, 2011, 11:46 AM
qwerty1000's Avatar
traditionally would be the size of 1800, 1440, 1080mm
it was under the impellers 58-98mm, depending on the scale model.
Aug 28, 2011, 01:02 PM
You win again gravity!
SMorrisRC's Avatar
Would a 64mm impeller fit inside the 1080mm??
Aug 28, 2011, 01:09 PM
qwerty1000's Avatar
the size of 1080mm, suitable impellers 58-68mm, depending on the task.
Aug 28, 2011, 01:42 PM
Registered User
Yes! Finally!

Could you consider making this at 1,5-1,6 meter lenght? 1.44m means 64mm fans , but i would prefer having single 90mm bifurbicared. Could you try drawing 90mm single fan version? 1.8m is just too large to have at home, 1,5 would be pretty much perfect if single 90mm would fit with ducting. Also retracts would be much easier with single fan at Center.
My friend already ordered su-27 from you, I planned to get 1.4 m version too, but now Iwant this one.

When this is ready?
Last edited by Ceeray; Aug 28, 2011 at 01:53 PM.
Aug 28, 2011, 01:50 PM
qwerty1000's Avatar
yet it is hard to say. We are doing everything possible to quickly produce results. wait 2 weeks. clarify the timing of issuance of finished models.
Aug 29, 2011, 01:37 AM
Registered User
Qwerty , it looks like this plane does not have foam intake ducting designed...

So could you please make intake ductings from foam pieces--> they would be easy to glass over and use them as plugs for glass fiber ducting?

Especially for bifurbicated version the plug would be VERY handy and would speed up the building progress considerably!
Aug 29, 2011, 01:43 AM
qwerty1000's Avatar
experiment. ducts are not made in this release to allow the modeler to make their own, under the used impellers.
this is also reflected in the cost model.
Aug 29, 2011, 03:54 AM
Pointy end at the front.
benjo's Avatar
So, How much is this one going to be? $1300 dollars?

I might suggest the same. Single 90mm is about the biggest that will fit in most cars. Planes are pointless if you can't take them anywhere.
Aug 29, 2011, 04:32 AM
qwerty1000's Avatar
Quote:
Originally Posted by benjo
So, How much is this one going to be? $1300 dollars?

I might suggest the same. Single 90mm is about the biggest that will fit in most cars. Planes are pointless if you can't take them anywhere.
I did not force. current prices are here:
http://bukvorez.ru/index.php?option=...d=36&Itemid=40
Aug 29, 2011, 10:49 AM
Registered User
Quote:
Originally Posted by qwerty1000
the size of 1080mm, suitable impellers 58-68mm, depending on the task.
This is a good size. Is this for two EDFs (I supposed)?
Aug 29, 2011, 10:57 AM
qwerty1000's Avatar
tentatively. final size will be known after the first cut.
Sep 12, 2011, 10:33 AM
qwerty1000's Avatar
We decided to form a channel of air ducts. The model will have them.



Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion SU-27, EDF, 1800mm, Tetris, Bukvorez qwerty1000 Foamy EDFs 230 Dec 01, 2015 11:42 AM
Discussion Tetris new project Boeing 747SP qwerty1000 Foamy EDFs 74 Jun 09, 2015 06:16 AM
Discussion SU-26, 1700, Tetris, Bukvorez qwerty1000 3D Flying 22 Nov 30, 2014 04:20 AM
New Product Airbus A320 at Tetris, Bukvorez. qwerty1000 Foamy EDFs 35 Apr 08, 2013 10:33 AM
Idea Tetris-Boats-Foam from Russia qwerty1000 Dock Talk 53 Oct 25, 2011 09:14 AM