Shop our Airplanes Products Drone Products Sales
Thread Tools
Aug 24, 2011, 11:14 AM
Dream Build Fly Scale
strictlyscale's Avatar
Looks like a perfect location, although I'm not crazy about hysoling a servo in permanently. I would have used the hitec flat mounts, glue those in then screw the servo to those.

Something like this: http://dreamworksrc.com/catalog/prod...ucts_id=527#sf
Sign up now
to remove ads between posts
Aug 24, 2011, 11:25 AM
Registered User
smaze17's Avatar
Lookin' good Billy!!

S
Aug 24, 2011, 11:31 AM
Registered User
BILLYDSRC's Avatar
I have the servo mounts and used them everywhere but on the elevator servos. If one goes bad inflight I don't think it will make it back to change it Thanks Billy D
Aug 24, 2011, 11:32 AM
Registered User
BILLYDSRC's Avatar
Quote:
Originally Posted by BILLYDSRC
I have the servo mounts and used them everywhere but on the elevator servos. If one goes bad inflight I don't think it will make it back to change it Thanks Billy D
http://ohiousarc.com/cart/ez-wing-se...c09dde312e7d52
Aug 24, 2011, 02:10 PM
Dream Build Fly Scale
strictlyscale's Avatar
I've never had one go bad in flight but I have had a couple of those not be able to recenter themselves. Both were repaired due to bad pots.
Aug 24, 2011, 03:01 PM
Registered User
BILLYDSRC's Avatar
The servo is held in with the two face tape and just a bit of hysol. I could get them out without a lot of work.
Aug 25, 2011, 01:48 AM
Registered User
BILLYDSRC's Avatar
Up all night getting a big deal of it done! Tx is set up..Have to install the e-flight retracts when they come in this week. Scott from XPS was nice enough to let us use 2-Hv140's there on there way now too.. Should have a maiden first part of next week!! I'm going to use 10s on the 1400kv..It's around 3500watts.. I'll test it and let ye know.. Billy D
Aug 25, 2011, 03:26 AM
Senior Member
Arngeir Blakseth's Avatar
Quote:
Originally Posted by rvincent
I would put the servo in the area I circled and run the linkage under the stab. I would also hysol in a heli-coil so I could use set screws and make the stabs removable for easy transportation
Agreed, but I have a better way of attaching the stabs. For those familiar with Multiplex gliders, or Tangent as they are called these days they use a socket and plug that snaps together when the wings are pressed into place against the fuselage. They are strong enough to hold the wings on a 3m glider in place so should be good enough for this application. They can be purchased as a set of 4 for 8.40 EUR.

http://www.multiplex-rc.de/produkte/...f4cde38b9d3544
Sep 06, 2011, 06:46 AM
Registered User
Any new update's

Marco
Sep 06, 2011, 05:21 PM
Registered User
smaze17's Avatar
Wow Billy!! Looks great!!!

Looking forward to a flight report


S
Sep 06, 2011, 05:23 PM
Renegade Fun Forever!!
rvincent's Avatar
Hey Billy? What retracts are those?
Sep 06, 2011, 08:21 PM
Registered User
BILLYDSRC's Avatar
There the big 120 size e-flight ones!
Quote:
Originally Posted by rvincent
Hey Billy? What retracts are those?
Sep 06, 2011, 08:22 PM
Registered User
BILLYDSRC's Avatar

Maiden Flight


I'm rendering the video right now Will be up soon
Sep 06, 2011, 09:14 PM
Renegade Fun Forever!!
rvincent's Avatar
Sweey Billy! Do you have those retracts?


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion HET L-39 VS Jet Teng L-39 skydve76 Electric Ducted Fan Jet Talk 48 Jan 23, 2012 03:46 AM
Build Log My new Jet-Teng Models (JTM) L-39 Albatros pajlotmato Electric Ducted Fan Jet Talk 37 Jul 14, 2011 07:37 PM
For Sale Jet teng 90mm Bae Hawk swiss rtf newly assembled $1500 jetfan20 Aircraft - Electric - Jets (FS/W) 1 Jun 05, 2011 02:00 AM
Jet Design Contest entry #2 -- Viperjet MKII berniep1 Electric Ducted Fan Jet Talk 10 Apr 18, 2008 11:30 AM