New Products Flash Sale
Thread Tools
Old Aug 23, 2011, 08:44 PM
Scott Cuppello is offline
Find More Posts by Scott Cuppello
Commercial UAV Pilot
No problems per se, we are just checking at the cause of this fuselage gap and a cure.
Sign up now
to remove ads between posts
Old Aug 23, 2011, 08:50 PM
1987tc is offline
Find More Posts by 1987tc
Come fly with us in Henryetta
I have never returned anything or had a need for any service from HK.
If I have the same issues with the fuselage what is the procedure for getting it handled?
Or any other problems with the plane should any be there.
Wes
Old Aug 23, 2011, 09:14 PM
Scott Cuppello is offline
Find More Posts by Scott Cuppello
Commercial UAV Pilot
There are no issues with the model, the withdrawl from sale is temporary while we check the manufacuring process and upload the PDF instructions, that is all.
Old Aug 24, 2011, 12:00 AM
CARAVANMAN is offline
Find More Posts by CARAVANMAN
Registered User

tiger moth


Do you know if hk is going to check the ones ordered but not yet shipped out for this gap to avoid any further issues... I got my fingers and toes crossed they are
Old Aug 24, 2011, 12:09 AM
MikeRobey42 is offline
Find More Posts by MikeRobey42
Quote:
Originally Posted by phoenix racing View Post
There are no issues with the model, the withdrawl from sale is temporary while we check the manufacuring process and upload the PDF instructions, that is all.
I think we need to give them time to check things out. My opinion is that HK are checking things out and want to make sure all is well. If all is well then nothing really has to be done but if something is wrong then lets give them some space to sort out solutions. If they weren't interested in fixing any potential problems then they would have just kept selling them and ignored the complaints. They are not doing that. So far they are acting very conscientiously and with caution so let's see what happens as a result.

Having just ordered one about 3 seconds before they got pulled I am understandably curious.
Old Aug 24, 2011, 06:42 AM
Roger Lombard is offline
Find More Posts by Roger Lombard
Confused? Who, me?
Roger Lombard's Avatar
Well, the model is back on the website although I haven't figured out yet where the PDF manual is hiding?
Old Aug 24, 2011, 08:15 AM
Scott Cuppello is offline
Find More Posts by Scott Cuppello
Commercial UAV Pilot
Doh! Sort it tomorrow..................
Old Aug 24, 2011, 11:10 AM
Roger Lombard is offline
Find More Posts by Roger Lombard
Confused? Who, me?
Roger Lombard's Avatar
No big rush for me Scott - mine's not showing as despatched yet...
Old Aug 24, 2011, 10:04 PM
Skycruiser is offline
Find More Posts by Skycruiser
I eat only vegetarian beef
Skycruiser's Avatar
My Tiggie arrived today. It has a gap in the fuselage seam that I find perfectly acceptable, about 0.5mm at the front going to 0.8mm at the back. I'll probably knife some filler into it, wipe off the surplus with a damp sponge, and colour it with some watercolour paint and a fine brush.

All in all a very good level of finish that will look excellent with an evening of final detailing. The kit even has the pitot tubes on the wing strut! The only other comment I'd make is that my bottom wing and tailplane were quite bent as they came out of the box.
Old Aug 24, 2011, 10:07 PM
1987tc is offline
Find More Posts by 1987tc
Come fly with us in Henryetta
Did the bend in the wings come out after they were out of the box for a bit?
Old Aug 24, 2011, 10:24 PM
Skycruiser is offline
Find More Posts by Skycruiser
I eat only vegetarian beef
Skycruiser's Avatar
Don't know, just opened it at lunchtime then went back to work. I don't see a problem though, a hot wet towel should do it.
Old Aug 24, 2011, 10:58 PM
1987tc is offline
Find More Posts by 1987tc
Come fly with us in Henryetta
I was thinking it might spring back over time. Did not expect it to be a big deal.
I can only imagine what the boxes go through in their travels!
Old Aug 25, 2011, 03:19 AM
MikeRobey42 is offline
Find More Posts by MikeRobey42

HK Tigermoth manual


Just downloaded the manual. Two conclusions:
1. I think Scott might have written it (in which case thanks).
2. I don't have my Tigermoth yet but the manual looks pretty good.
Lots of photos of what to do and the descriptions seem pretty good.

The only thing I couldn't see was the control throws but on a plane
like this I'd be trying to get as much throw as I could, set about 40%
expo and then adjust as I go. Of course others might have different
opinions on that.
Old Aug 25, 2011, 05:30 AM
pommie is offline
Find More Posts by pommie
Registered User
pommie's Avatar
hey mike where you go to download the manual i cant seem to see it anywhere ?

oops i just see it now under the little tabs saying files

http://www.hobbyking.com/hobbyking/s...92X7478X48.pdf
Old Aug 25, 2011, 05:44 AM
Roger Lombard is offline
Find More Posts by Roger Lombard
Confused? Who, me?
Roger Lombard's Avatar
Great, thanks for that Pommie, especially because I can't open the files myself on the site - no idea why.
Last edited by Roger Lombard; Aug 25, 2011 at 06:08 AM.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Tian Sheng FW-190 kit from Hobby King (1 meter, EPO) byxnplanes Electric Warbirds 229 Sep 27, 2012 09:36 PM
Discussion fastest epo foam electric from hobby king or other dr50376272 Electric Plane Talk 48 Oct 28, 2011 12:29 PM
Discussion Hobby Lobby 50" Tiger Moth wolfewinde Scale ARF/RTF 10 Jun 20, 2011 10:25 AM
New Product Hobby King 2.3M EPO EP Ventus PNF Doubletap Electric Sailplanes 1 Apr 05, 2011 11:00 PM