Thread Tools
Sep 20, 2011, 08:01 AM
Registered User
@ dji: will this change in ESC freq. up to 400-600 Hz only be for your own Esc-type?

My HiModel 40 Amp can go up to 400 Hz too; would be nice if one can choose that in the
software, oh and i don´t wont to cut the red wire because if i want to reprogram it with
my card i had to pull it in again which is a nightmare to do.

Someone posted here that the Avroto are fare better than the original TigerMotors.
Well, I got 8 of the original 2814-11 right in front of me and i can tell you they look and work as good as my Pulso´s if not better so this is purely marketing BS.
They had the same shaft´s the same EZO bearings and the same housing, so what´s left
that makes the other twice the price, Snake-oil in the bearings?
Sign up now
to remove ads between posts
Sep 20, 2011, 08:02 AM
Registered User
Hi Guys,

I just came across this.

$1069.00

http://www.foxtechfpv.com/djiwkm-mul...ing-p-362.html

Bob
Sep 20, 2011, 08:56 AM
Registered User
Quote:
Originally Posted by dji
HI Boris,

for heavy lifters we have 100% confidence: with current firmware, and with right esc motor and props can have perfect result. we will post a video there later to prove this.

Frank
I'm using Hobbywing Fentium ESCs, with supposedly one of the best motor brands (Axi), with supposedly one of the best frames (Droidworx SkyJib8), its weight without payload is approx. 6 kilos, so could you give me an idea based on your findings as to what gain settings I should be using to give flight characteristics that are good for aerial filming? What is the specification of the heavy lift setup you are having good results with? Looking forward to the video you mention, it will be a good visual comparison to see how it behaves compared to mine.
Sep 20, 2011, 08:58 AM
Discipulus est prioris posteri
Quote:
Originally Posted by jules_b
i'm using hobbywing fentium escs, with supposedly one of the best motor brands (axi), with supposedly one of the best frames (droidworx skyjib8), its weight without payload is approx. 6 kilos, so could you give me an idea based on your findings as to what gain settings i should be using to give flight characteristics that are good for aerial filming? What is the specification of the heavy lift setup you are having good results with? Looking forward to the video you mention, it will be a good visual comparison to see how it behaves compared to mine.
+1
I hope also an answer ...
I will also wait to see what kind of config Robert will build for its new hexa uavframe... what kind of motors/esc are you going to use Robert ?
Last edited by protowax; Sep 20, 2011 at 10:06 AM.
Sep 20, 2011, 09:00 AM
Z06 Tony's Avatar
Quote:
Originally Posted by Bob valley
Hi Guys,

I just came across this.

$1069.00

http://www.foxtechfpv.com/djiwkm-mul...ing-p-362.html

Bob
For U.S. customers RC Hobby Helicopter is selling them for only a little more than FT and he is in U.S. and has a tech support # on his site. Something you will not get from FT. He is selling for $1120 w/power module and free shipping-> http://www.rchobbyhelicopter.com/sto...ontrol_Systems
Sep 20, 2011, 09:26 AM
RTF copters maker
maximus-rc's Avatar
Quote:
Originally Posted by tritan
maxi,
have you tested that? results?
thanks
My chinese friend flies with this and cover with good GPS hold
Sep 20, 2011, 10:05 AM
Spiritual Hovering
Coptaire's Avatar
Quote:
Originally Posted by Z06 Tony
For U.S. customers RC Hobby Helicopter is selling them for only a little more than FT and he is in U.S. and has a tech support # on his site. Something you will not get from FT. He is selling for $1120 w/power module and free shipping-> http://www.rchobbyhelicopter.com/sto...ontrol_Systems
Am on buying a WOOKONG very soon, but I did not follow the latests.
Could someone tell me what is the power module?
Separate product sold now? bundled with wookong?
Thanks!
Sep 20, 2011, 10:08 AM
Suspended Account
Bundled, included with all new orders and/or back-filled to previous orders free of charge.
Basically a UBEC
Sep 20, 2011, 10:27 AM
Registerer Used
milouze's Avatar
It also allows more features like low-batt warning, RTH and landing in that case etc.. Well explained in the updated manual.
Sep 20, 2011, 11:02 AM
Registered User
Quote:
Originally Posted by Z06 Tony
For U.S. customers RC Hobby Helicopter is selling them for only a little more than FT and he is in U.S. and has a tech support # on his site. Something you will not get from FT. He is selling for $1120 w/power module and free shipping-> http://www.rchobbyhelicopter.com/sto...ontrol_Systems
Lets play. $1000 with free shipping and power module included only at DJIUSA.com. I'll run it till end of Sept. and maybe longer. This is going to be comical.

Oh and I have a contact number and lots of years of providing customer service.

And we are off, losing money but that is they way to play the game I guess.
Sep 20, 2011, 11:10 AM
Registered User
llbr22's Avatar
Quote:
Originally Posted by rerazor
Lets play. $1000 with free shipping and power module included only at DJIUSA.com. I'll run it till end of Sept. and maybe longer. This is going to be comical.

Oh and I have a contact number and lots of years of providing customer service.

And we are off, losing money but that is they way to play the game I guess.
Robert, you da man! I'm bummed I paid the 'introductory' (BS) price, but way to play the game.

I'm a tech re seller myself (TV Broadcast) and we run into this crap all the time.
Sep 20, 2011, 11:11 AM
Registered User
rerazor what is the contact number its not on the new site yet.

Michael64
Sep 20, 2011, 11:14 AM
Registered User
Quote:
Originally Posted by Michael64
rerazor what is the contact number its not on the new site yet.

Michael64
517-862--1386
Robert @ DJIUSA.com

Updated shipping cart.

Now back to the builds.
Sep 20, 2011, 11:14 AM
Discipulus est prioris posteri
The problem with all this price war is that when options like waypoints option will be available, everybody will remember all of that and will wait to see if the price goes down... I think 1200 $ is a fair price for the product I bought and all of this is just showing that there is no price reality...
Sep 20, 2011, 11:26 AM
Z06 Tony's Avatar
Quote:
Originally Posted by rerazor
Lets play. $1000 with free shipping and power module included only at DJIUSA.com. I'll run it till end of Sept. and maybe longer. This is going to be comical.

Oh and I have a contact number and lots of years of providing customer service.

And we are off, losing money but that is they way to play the game I guess.
Glad I did not buy from you at $1200. I would not be too happy that you just lowered your price right after my purchase. I bet you will get some PM's/E-mails asking for a $200 refund now. I am sure you know what your doing though.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Ballistic Recovery System for Multirotors Duck! Aerial Photography 66 Nov 13, 2015 04:37 PM
Discussion DJI - WooKong eStab for Scale sidneyw Scale Helicopters 97 Dec 30, 2012 10:48 AM
Discussion FY3ZT Autopilot for Aerial Photography feiyudz Aerial Photography 116 May 07, 2012 04:58 PM
Discussion DJI AceOne autopilot for sale... hazchem88 Aerial Photography 4 Mar 31, 2011 03:54 AM
Discussion DJI Innovation helicopter autopilot XP.3.1 for European customers JoelT Aerial Photography 2 Sep 24, 2009 11:43 AM