Thread Tools
Nov 14, 2012, 07:19 PM
Registered User
rruiz's Avatar
Quote:
Originally Posted by marchino65 View Post
Hi,
new version software

http://www.dji-innovations.com/produ...g-m/downloads/

What’s changed?
- Attitude is controllable when one power output of Hexa-motor is failed in Atti. Mode and GPS Atti. Mode, including Hexa-rotor IY and Hexa-rotor Y.
- When one power output of Hexa-motor is failed in Atti. Mode and GPS Atti. Mode, Hexa-rotor I and Hexa-rotor V will spin to keep the aircraft stable.

What’s new?
- S-bus2 receiver is supported for D-Bus port.
- Height limit is added in the Tool.
Guys do you know why the link is not working? No file to download!

Regards
Sign up now
to remove ads between posts
Nov 14, 2012, 07:47 PM
Lost in the wind
Quote:
Originally Posted by rruiz View Post
Guys do you know why the link is not working? No file to download!

Regards
I just tried, it works for me.

here is the zip file: you can right click and save or just click it and save it somewhere on your desktop. Then you will have to extract it.

http://download.dji-innovations.com/...aller_1.34.zip

KS
Nov 14, 2012, 10:23 PM
Registered User
rruiz's Avatar
Quote:
Originally Posted by ksrimoungchanh View Post
I just tried, it works for me.

here is the zip file: you can right click and save or just click it and save it somewhere on your desktop. Then you will have to extract it.

http://download.dji-innovations.com/...aller_1.34.zip

KS
Thanks
Nov 15, 2012, 02:20 AM
Registered User
More test flights to be done but 5.16 really seems to be a lot smoother.
Nov 15, 2012, 05:36 AM
Registered User
sdaudet's Avatar
Just an idea :
hole 2mm
taraud M3
perhaps dji can make it
Nov 15, 2012, 06:01 AM
Registered User
toscatara's Avatar
Quote:
Originally Posted by sdaudet View Post
Just an idea :
hole 2mm
taraud M3
perhaps dji can make it
thanks for the idea
Nov 15, 2012, 07:44 AM
Registered User
Quote:
Originally Posted by sdaudet View Post
Just an idea :
hole 2mm
taraud M3
perhaps dji can make it

Good idea, something like this should have been pretty much standard from the beginning imho, easy replace if pole got broke in a crash..
Nov 15, 2012, 08:55 AM
Registered User
It's a good idea. I put a slit in my base and use a collar to clamp it.

I think DJI are sensible not to do it. Can you imagine lots of people doing this, maybe without thread lock. Then the screw comes lose and the GPS rotates!! It would mean yet more unexplained crashes blamed on DJI!!
Nov 15, 2012, 09:00 AM
Registered User
sdaudet's Avatar
Quote:
Originally Posted by hex junky View Post
It's a good idea. I put a slit in my base and use a collar to clamp it.

I think DJI are sensible not to do it. Can you imagine lots of people doing this, maybe without thread lock. Then the screw comes lose and the GPS rotates!! It would mean yet more unexplained crashes blamed on DJI!!
yes i put some small glue on screw and there is 2 screw by part
Nov 15, 2012, 09:07 AM
Registered User
I didn't mean you I meant the other 1000s WKM users!
Nov 15, 2012, 09:19 AM
Registered User
hexa's Avatar
No they are just down right lazy taking things for granted.

That grub screw idea should have being there from day one.
It's in frame manual to use thread lock every rc person must have a bottle.

I read Dji was telling folks to rotate the GPS compass to fix drifting or toilet bowling.
This grub screw idea would make tweaking compass more easier.
Nov 15, 2012, 09:22 AM
Registered User
Does someone have still a Wookong with the drift problem and tried the new FW with it ?
Mine is still at the reseller so no chance to test it.
Nov 15, 2012, 09:32 AM
saabguyspg's Avatar
mine has an "instability and white flash problem" so I will upgrade the firmware, if it does not correct it I am sending it back.

Steve
Nov 15, 2012, 09:40 AM
Registered User
hexa's Avatar
Quote:
Originally Posted by saabguyspg View Post
mine has an "instability and white flash problem" so I will upgrade the firmware, if it does not correct it I am sending it back.

Steve
I remember you had these problems from day one.
Is this the same wkm unit from day one?
If so there is defiantly some thing wrong with it.
Some do have faults as I had wkm set with faulty sensor cube that would not stabilise the copter and would get really hot. I swap the cube with a working cube from a next set an all was fine.
Nov 15, 2012, 11:58 AM
What goes around comes around.
squigg's Avatar
Flew 5.16, today with a new compass installed on a CS8, unchanged gains.. nice & smooth alright, white flashes completely disappeared, Yaw seemed really smooth, kinda dampened on stick release. All good so far.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Ballistic Recovery System for Multirotors Duck! Aerial Photography 66 Nov 13, 2015 05:37 PM
Discussion DJI - WooKong eStab for Scale sidneyw Scale Helicopters 97 Dec 30, 2012 11:48 AM
Discussion FY3ZT Autopilot for Aerial Photography feiyudz Aerial Photography 116 May 07, 2012 05:58 PM
Discussion DJI AceOne autopilot for sale... hazchem88 Aerial Photography 4 Mar 31, 2011 04:54 AM
Discussion DJI Innovation helicopter autopilot XP.3.1 for European customers JoelT Aerial Photography 2 Sep 24, 2009 12:43 PM