New Products Flash Sale
Thread Tools
Old Oct 05, 2011, 01:20 AM
Axefly is offline
Find More Posts by Axefly
Registered User
I'm happy with my Align controllers soft startup for my heli's, but would for interest's sake
just like to know if the eRC's soft start is on par, better or worse than Align's soft startup ?
Sign up now
to remove ads between posts
Old Oct 05, 2011, 09:04 AM
JustPlaneChris is offline
Find More Posts by JustPlaneChris
Registered User
JustPlaneChris's Avatar
I've never used an Align ESC, but from the ones I've seen at the field I'd say it's about the same, maybe slightly less linear on the ramp up to the target RPM.

-Chris
Old Oct 05, 2011, 07:31 PM
DeadByDawn is offline
Find More Posts by DeadByDawn
Villain Extraordinaire
DeadByDawn's Avatar
I'm using their 12amp ESC with their BL300 motor. No complaints as of yet : smooth, responsive, and you just can't beat the price - less than $40 for the pair.
Old Oct 26, 2011, 04:55 PM
Dennis Everett is offline
Find More Posts by Dennis Everett
Registered User
Dennis Everett's Avatar
Ill test one of the 155 amp ones if you send it to me , include the programmer , using it on this ............
Old Oct 26, 2011, 05:08 PM
Bajora is online now
Find More Posts by Bajora
AA6JB
Bajora's Avatar
What power system and lipos are you using in that Dennis? Whose kit is that?
RCG Plus Member
Old Nov 18, 2011, 11:00 AM
Tres Wright is offline
Find More Posts by Tres Wright
Live to ride... and fly!
Tres Wright's Avatar
The spec's show the 12a, 25a and 35a ESCs rated for 4s, does anyone know if the BEC has to be disabled for 4S operation on these? I found the manual on the HL web site and it doesn't mention it, perhaps that means the BEC doesn't have to be disabled but it would be nice to know for sure before trying it

http://s3.amazonaws.com/hobbylobbypdf/ercesc-inst.pdf
Old Dec 13, 2011, 10:55 PM
warbird_cowboy is offline
Find More Posts by warbird_cowboy
Cowboy of the skys
warbird_cowboy's Avatar
hmmmmm im curious on how these do
Old Jan 02, 2012, 03:11 PM
c/f is offline
c/f
Find More Posts by c/f
c/f
Registered User
I got the 65amp in an ExtremeFlight 48" Edge, 70amps 800 watts into a Scorpion motor, very impressed with plug and play, no issues no heat well cooled, 4 Hyperion DS11 servos, 55oz 6VDC,

I went and bought the 115amp to go in my Outlaw that had been current limited with the HWPlatinum Pro 100. Hope to push 2500W 6s thru that one.
RCG Plus Member
Latest blog entry: last to go..............
Old Jan 29, 2016, 11:13 AM
BrownEyedFool is offline
Find More Posts by BrownEyedFool
You're killin' me Smalls
BrownEyedFool's Avatar
subbed
Old Jan 29, 2016, 05:58 PM
slappomatt is offline
Find More Posts by slappomatt
Registered User
I am pretty sure hobby lobby is an arts and crafts store. I doubt they sell anything Rc other than glue and exacto knives.
Old Jan 29, 2016, 11:51 PM
Mike Dubovsky is online now
Find More Posts by Mike Dubovsky
I am a nice guy! Really!
Hobby Express was the "other" Hobby Lobby" up until about two years ago. The two used to have links on their home pages to direct people that got the wrong "Hobby Lobby" to the one they were looking for.

http://www.hobbyexpress.com/

I am wondering why someone would subscribe to a thread that has not had a post in 4 years. And if you want to subscribe you do not have to post to the thread, you can do it under the "Thread Tools" tab at the top of the page.
Old Jan 30, 2016, 04:46 AM
chuck75 is offline
Find More Posts by chuck75
Registered User
[QUOTE=Mike Dubovsky;33862957]Hobby Express was the "other" Hobby Lobby" up until about two years ago. The two used to have links on their home pages to direct people that got the wrong "Hobby Lobby" to the one they were looking for.

http://www.hobbyexpress.com/


ERCE085SB 85A SB 85A\100A 5-18Ni\2-6Li 63 5.0V,5.5V,6.0V adjustable /5A 34x46x13

My experience with one of these was sort of OK. I liked programming with the programmer. Initial ground tests went well. Unfortunately, an extended ground run up resulted in the ESC burning out. HE replaced it under warranty. In the interim, after repairing model damage due to the fire, I installed a CC 75A ESC.
Since that continues to work well, I haven't changed back.
The ERC ESC was really well done. It looked like the BEC chip cooked off first, followed by a general burnout. The 6S5000mah we were using survived, only because the battery wires melted off the ESC solder pads. Evidently the 6S lipo and servo count resulted in the failure. Post repair testing resulted in replacement of one servo that may have been failing before the burn out, or may have failed due to it. As the Lipo cell count increases, the safe BEC current drops. 5A at 4S is quite different than 5A at 6S.
Old Jan 31, 2016, 09:16 AM
BrownEyedFool is offline
Find More Posts by BrownEyedFool
You're killin' me Smalls
BrownEyedFool's Avatar
Quote:
Originally Posted by Mike Dubovsky View Post
Hobby Express was the "other" Hobby Lobby" up until about two years ago. The two used to have links on their home pages to direct people that got the wrong "Hobby Lobby" to the one they were looking for.

http://www.hobbyexpress.com/

I am wondering why someone would subscribe to a thread that has not had a post in 4 years. And if you want to subscribe you do not have to post to the thread, you can do it under the "Thread Tools" tab at the top of the page.
Because I am acquiring a model powered with these escs shortly. And having a post in the thread makes finding it slightly faster than purely subscribing in my experience.
Old Jan 31, 2016, 07:37 PM
Mike Dubovsky is online now
Find More Posts by Mike Dubovsky
I am a nice guy! Really!
[QUOTE=chuck75;33863932]
Quote:
Originally Posted by Mike Dubovsky View Post
Hobby Express was the "other" Hobby Lobby" up until about two years ago. The two used to have links on their home pages to direct people that got the wrong "Hobby Lobby" to the one they were looking for.

http://www.hobbyexpress.com/


ERCE085SB 85A SB 85A\100A 5-18Ni\2-6Li 63 5.0V,5.5V,6.0V adjustable /5A 34x46x13

My experience with one of these was sort of OK. I liked programming with the programmer. Initial ground tests went well. Unfortunately, an extended ground run up resulted in the ESC burning out. HE replaced it under warranty. In the interim, after repairing model damage due to the fire, I installed a CC 75A ESC.
Since that continues to work well, I haven't changed back.
The ERC ESC was really well done. It looked like the BEC chip cooked off first, followed by a general burnout. The 6S5000mah we were using survived, only because the battery wires melted off the ESC solder pads. Evidently the 6S lipo and servo count resulted in the failure. Post repair testing resulted in replacement of one servo that may have been failing before the burn out, or may have failed due to it. As the Lipo cell count increases, the safe BEC current drops. 5A at 4S is quite different than 5A at 6S.
Okay, I guess if that helps you go for it. Now another question: Why would someone quote my post and then say absolutely nothing in his/her portion of the post that has anything to do with my post? This site makes me smile at times in the wonderment.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Question Where are the NEW PLANES from Hobby Lobby? kydawg1 Hobby Express (Formerly Hobby Lobby) 7 Jun 13, 2011 11:45 AM
Sold 3s 1600 20c battery from Hobby Lobby EDF - brand new, $16 shipped Garret H Aircraft - Electric - Batteries & Chargers (FS/W) 2 May 04, 2011 09:32 AM
Discussion Anyone using E-RC motors from Hobby Lobby? hasselblad7 Power Systems 0 Aug 09, 2010 01:24 AM