Shop our Airplanes Products Drone Products Sales
Thread Tools
Aug 06, 2011, 05:03 PM
lazy 3D specialist
ronbo111's Avatar

GW Pitts Python 50cc V2

Have been looking at 50cc sized Pitts Pythons and narrowed it to 2 choices, Aeroworks and Goldwing.The Aeroworks looks great and looks to be better built with great hardware.The GW specs were a little lighter and offered a gold & black color which IMO looks best

So I called Jody at Milehigh RC and he hasnt built the Pitts but has seen it fly and all was good.

I ordered and received the Pitts in good order and ready to start the build.

Here is the specs;


Pitts Python 50CC V2 (Gold-Black)
WING SPAN:71"(1800mm)
WING AREA:1735sq in(112sq dm)
FLYING WEIGHT:16-17.4lbs(7200-7900g)
ENGINE:50-60cc gas

1- Latest structure design
2- Top quality
3- Easy assembly
4- Complete with accessories
5- Low wing loading makes it easy to fly
6- Light weight construction while keeping high structural strength
7- Excellent aerobatics and 3D performance
8- High performance hardware includes:
a) Heavy duty anodized aluminum horns
b) Adjustable pushrods for easy fine tuning
c) One piece 6061 T-6 anodized aluminum landing gear
d) Advanced rubber wheels
9- Two pieces removable wings and stabs (ELEVATOR NOT REMOVABLE)
10- Carbon fiber wing tube
11- Carbon fiber tail wheel assembly
12- Anodized long aluminum servo arms included
13- Servo extension safety connector clips also included
14- Carbon fiber rods, making the wings strong and light weight
15- Scale canopy
16- Fixed ring inside cowling for easy assembly
17- Pre-hinged control surfaces
18- Pre-mounted and plumbed gasoline tank
19- Pre-installed servo wire tube
20- Genuine Oracover film

Some of this hardware looks new to me,so I may need some help.

I will keep you posted on the build
Last edited by ronbo111; Sep 09, 2011 at 05:30 AM.
Sign up now
to remove ads between posts
Aug 06, 2011, 05:11 PM
Team Hillbilly 🐘💨
bullittjeff's Avatar
You have taken too long already. Let's get this babY flying!
Aug 06, 2011, 05:30 PM
lazy 3D specialist
ronbo111's Avatar
Originally Posted by bullittjeff
You have taken too long already. Let's get this babY flying!
Still trying to find the control horns and the removable stab
Aug 12, 2011, 08:07 PM
lazy 3D specialist
ronbo111's Avatar
Dam this Pitts is a beauty,still sorting things out but I did figure some weights and with a DA 50 about 17lbs and with the electric Rimfire 50cc about 18lbs.

Ok ,back to work
Aug 12, 2011, 08:12 PM
Barefoot Birkinsomething
rcbirk21's Avatar
Leccy all the way. Can't wait to see her fly ron!
Aug 12, 2011, 08:21 PM
lazy 3D specialist
ronbo111's Avatar
Originally Posted by rcbirk21
Leccy all the way. Can't wait to see her fly ron!
ya,let me know if ya hear any news on 55cc motor from Motrolfly,glad to hear your going to the huckfest,we will be up Thursday ,see ya then
Aug 12, 2011, 08:33 PM
Barefoot Birkinsomething
rcbirk21's Avatar
just heard from manta...still going to a while but he is getting a test motor relatively soon
Aug 23, 2011, 12:07 PM
Registered User
Dennis C's Avatar
Did you take a trip,or what? Been 10 days and no new information.

Being a biplane addict I want to see how this thing goes. And good luck

Aug 24, 2011, 01:01 PM
A tale of two slickies
0gravity's Avatar
are the elevators removable? I'm guessing not.
Aug 24, 2011, 06:03 PM
lazy 3D specialist
ronbo111's Avatar
Ok guys have made some progress ,all servos are mounted .Only thing yet to do is mount the power system .The elevators are not removable .
Ill post some picks later tonight.
Aug 24, 2011, 09:09 PM
lazy 3D specialist
ronbo111's Avatar
So far so good on the build,everything goes together well,only issue so far is the tail wheel ,I dont think its for this model, the tiller sets back to far and could cause some binding,will see.

I will be using Hitec 7955 with SWB 1.5" on elevator and 3" on pull pull rudder.On the ailerons Hitec 5685 with with stock double arms cut down.I will use 2s lipo for power.

Any questions or comments please jump in

Last edited by ronbo111; Aug 24, 2011 at 09:26 PM.
Sep 08, 2011, 08:37 PM
lazy 3D specialist
ronbo111's Avatar
Anyone wanting to see how great this bird flys,check out this video. .

Almost done just a few things to get done,hopefully maiden this weekend
Sep 08, 2011, 09:39 PM
Team Hillbilly 🐘💨
bullittjeff's Avatar
That's the worst video. I can't believe they put that on their website. What a joke.
Sep 11, 2011, 08:41 PM
lazy 3D specialist
ronbo111's Avatar
Ok ,I know everyone is waiting on a flight report ,I did get to fly the maiden but had 2 bolts on standoff loosen so those are tight and ready.Hope to try again Wedsday
Sep 27, 2011, 09:48 PM
lazy 3D specialist
ronbo111's Avatar
update: got 3 flights on the Python last weekend at the Newark Throwdown.
The plane presents itself well in the air .As for flight ,it will need some work ,needed like 7 clicks of right rudder to get to fly straight and on up line it falls to the left,so Ill get some right thrust in and see how that goes,Still need to move a battery back for cg as it is a little nose heavy ,no big deal there.As for KE it will need some mixing as most bipes do.

Overall ,Im happy with it so far.Iam going to order graphics as the supplied ones are some photos for anyone how doesnt follow the 3DHS addicts thread and again thank you Don,you take great photos,you should be selling these

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Found Cowl for ZeroGravity Pitts Python djmoose Aircraft - Electric - Airplanes (FS/W) 1 Jul 01, 2011 01:05 PM
Discussion Pitts Python rc flyer dude 3D Flying 2 Apr 04, 2011 10:37 PM
Discussion Who makes this Pitts Python model? racin06 Giant Electric Planes 4 Apr 02, 2011 04:53 AM
Discussion Pitts Python Crash : ( rc flyer dude 3D Flying 15 Apr 01, 2011 09:41 PM
Sold AeroWorks Pitts Python 50CC skypan12 Aircraft - Fuel - Airplanes (FS/W) 1 Sep 09, 2008 11:52 PM