Celectra 1S 3.7 Variable Rate DC Li-Po Charger on 120 &150mah batteries? - RC Groups
Thread Tools
Jul 29, 2011, 07:04 PM
Registered User
Discussion

Celectra 1S 3.7 Variable Rate DC Li-Po Charger on 120 &150mah batteries?


I just received the charger listed below and a 120v x 6v 1500 mah power source from ebay. The instructions only refer to charging a 500mah battery. It says to charge the 500hah at .7 but I plan to use it on 120 and 150mah batterys. It's variable in tenths from .1 thru .7ah. What setting would I use for these batteries? Eventually I hope to get a Parkzone Masquito which comes with a 250mah what would I use for that? Any help would be greatly apreciated.

http://www.e-fliterc.com/Products/De...rodID=EFLC1006

Celectra 1S 3.7 Variable Rate DC Li-Po Charger
Product Specifications
Type: 1 Cell Lithium Polymer DC Charger
Input: 6V DC
# Cells: 1
Charge Rate: Variable 0.1 to 0.7 in 0.1 increments
Output Connector: Ultra Micro
Battery Type: LiPo
Last edited by pcnewman; Jul 30, 2011 at 07:58 AM.
Sign up now
to remove ads between posts
Jul 30, 2011, 12:41 PM
Registered User
I spoke with support at Horizon Hobbies. They said 120 and 150mah should be charged at .3 amps and the 250 should be charged anywhere between .3 and .7 amps. Sound right to you folks?
Jul 30, 2011, 01:10 PM
Registered User
The safe suggestion, to reduce the risk of damaging the batteries, is to charge at 1C. A 1C charge rate is basically the capacity of the battery. A 100mAh (0.1Ah) battery is charged at 0.1A for 1C. A 300mAh (0.3Ah) battery is charged at 0.3A for 1C, etc.

If you want to play it extra-safe, charge the 120 and 150mAh batteries at 0.1A, and the 250mAh batteries at 0.2A. That will be under 1C. Or go to 0.2A for the 120 & 150mAh batteries, 0.3A on the 250mAh batteries, to go over 1C.

Your power source description kind of puzzles me. Do you mean 120V AC to 6V DC, and 1500mA (1.5A)? That's what my 1-port Celectra came with.
Jul 30, 2011, 01:26 PM
Registered User
That makes sense. Thanks for the info and yes I meant, 120V AC to 6V DC, and 1500mA (1.5A)?
I've charged two of my 120's at .3 and it took the same 25-30 minutes as the charger that came with my Champ. It must be charging at .3 also? The batteries have never even gotten warm to the touch when charging but if a lower rate will add life I'm all for it.
Thanks again.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Sold 4-Port 1S 3.7V 0.3A DC Li-Po Charger by E-flite AirRaider_2009 Aircraft - Electric - Batteries & Chargers (FS/W) 2 Jun 06, 2011 01:18 PM
Sold Celectra 1S 3.7 Variable Rate DC Li-Po Charger elgecko Aircraft - Electric - Batteries & Chargers (FS/W) 2 May 12, 2011 01:51 PM
For Sale mCPX Celectra 1S 3.7 Variable Rat DC LiPo Charger $25 shipped HeliStyle Aircraft - Electric - Helis (FS/W) 5 Apr 23, 2011 11:34 PM
For Sale MCPX Celectra 1S 3.7 Variable Rate DC Li-Po Charger by E-flite indoorheli Aircraft - Electric - Helis (FS/W) 3 Apr 17, 2011 11:20 AM
Sold Celectra 4-Port 1S 3.7V 0.3A DC Li-Po Charger pdansalvish Aircraft - Electric - Batteries & Chargers (FS/W) 1 Oct 11, 2009 10:45 PM