Shop our Airplanes Products Drone Products Sales
Thread Tools
Dec 23, 2011, 03:27 PM
Registered User
Michael Heer's Avatar
My Spitfire was on dawn patrol in freezing weather when I encountered a large squadron of Geese numbering in the hundreds. I picked up 20 plus wing men for one long pass and some started to turn with me when the rest broke off to go land in the Delta and the others followed them leaving me alone to fight off the sparrows and land. Plane looked so great with the geese I forgot I was freezing. Mike H
Sign up now
to remove ads between posts
May 13, 2012, 06:39 PM
Registered User
I have the 10-15 size main landing gear electric retracts (EFLG100), but do you guys think the Pre-bent landing gear struts for the retracts (PKZ5717) are mandatory for retractable gears? Would I be able to use the struts that came with the original gears out of the box?
May 13, 2012, 08:28 PM
Registered User
restlessswind's Avatar
Quote:
Originally Posted by Littlesopwith
I have the 10-15 size main landing gear electric retracts (EFLG100), but do you guys think the Pre-bent landing gear struts for the retracts (PKZ5717) are mandatory for retractable gears? Would I be able to use the struts that came with the original gears out of the box?
You could snip and bend them and grind some flats, but the pre-bents are only $3 and they include undercarriage concealment fairings that actually hide the retract motors and black plastic
May 13, 2012, 08:28 PM
Your Pilot Ryan
ryramZ's Avatar
Quote:
Originally Posted by Littlesopwith
I have the 10-15 size main landing gear electric retracts (EFLG100), but do you guys think the Pre-bent landing gear struts for the retracts (PKZ5717) are mandatory for retractable gears? Would I be able to use the struts that came with the original gears out of the box?
If I remember correctly mine caught up in the wheel wells when I did it while I was waiting for my prebent struts. In my opinion the pre bents are the way to go. With my pre bents I bent them a little also. The axle comes 90 degrees to the strut. The strut is at an angle this makes the wheels contact the ground at an angle. I bent mine to make the axles parallel to the ground which puts the wheels straight up and down which makes for better rolling. This was necessary for me since I fly off grass, off of pavement however I never had a problem.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Parkzone Spitfire Mk IX Thread bdshort Electric Warbirds 14073 Today 06:02 PM
Discussion Top-Flite 1/7 SPITFIRE Mk IX Tail Pics Jsutherland8 Your Plane Photos 0 Mar 26, 2011 01:53 PM
HL's new spitfire Mk-IX Ben74 Foamies (Kits) 1 Jul 01, 2003 05:07 PM