Smartmodel are doing their own scale pilot figure in some different size .The 1/6 have some different products in market ,so we do the first batch are 1/7 , 1/7 are easy to fit and match a lot markey fuselage size 600-700 size , so the first batch are 1/7 coming out after two week !the 1/8 are also doing in this moment . Both looking are same , because this look are ok for many many different type scale helicopter . so the design have no big different with this new 1/8 size . but 1/8 are very easy to fit the market 50 nitro/600 or some 500 size .i have make this list let you easy to know what size you can order in the future . The scale are not exactly fit but very close .

The 1/7 can fit to following list :
Funkey -- AS -350 /50 nitro ,Jetranger/50,Hughes/50(a little small ), longranger -60 .

RCAerodynes : Jetranger/700,AS-350 600/. Hughes-500/600 size ,EC/145-600 ,Alouette-600 ,Bell uh-1b-800,Blue thunder -700,BO-105-600 ,A119-600 .
Hirobo :EC-120 ,EC-145,Bell uh-1 (old gasoline ),
Smartmodel/TF model , EC-145 -600, Bell uh-1-800 ,jetranger -700,Alouette-3 -600 ,Blue thunder -700.

1/8 are possible fit : Funkey,Airwolf -60, Bell 222-60 ,longranger 50,A109-60,Jetranger -50 .
RCAerodynes :Hughed-500 500size ,BO-105-500 ,AS-350 500 ,EC-145 500,Seahawk/Blackhawk 600 ,Apache AH64 -600 .Mi-24 -600 .
Hirobo : LAMA-30 ,Bell uh-1 -30 .
Snartmodel/TF model : EC-145 500,Bell uh-1b -600 ,BO-105 -500 ,Cobra-600,Apache ah-64 600 .Mi-24-600 .
Still alot fuselage possible to fit in marlet . but no time to check ! i will post the size in this tpoic , the first batch will come out two week later !
thankyou guys !

The 1/6 size , i only do the helmet , because the 1/6 figure body have many in market , so the body i have no need to do . but they have no helmet ! so we do the helmet only in 1/6 .

Nice!

Looking forward to getting a set of these for the Cobra!

Hello all,

Those I like to have in my 600 size Apache (from Kin) when they come available
With a cockpit I still don't have found (Kin????)

Regards,

Jan,

The 1/7 figure production sample are come out tomorrow ! let me show you soon !the 1/8 will come out in end Sept!

The first batch 10 piece pototype (not yet painting version ) .it is 1/7 size .the product will post to website about 10 days . But you can pre-order it , it is soft plastic and easy painting , use the Tamiya paint (for r/c car body) .I think is PS paint . (For soft plastic ) . The pilot kit are included two head . civil with head set and no head set but next head are for helmet , and the helmet have a movable sun cover !, the hand are possible adjust the angle in the shoulder . head are rotate possible .

Looking real nice Kin,

Ha ! Ha! the photo that you can follow to paint it , very easy .

Looks very NICE!

What about the prices?

The first batch come out in next week ! the price about 58 usd roughly it is included two head . one is for civil (head set with sunglass ) and other one is no head set but come with the helmet ) the helmet sun cover are movable ! hand possible ajustable and the body are hollow and soft plastic so you can easy fit in your cockpit seat !.

Today let you see the products of the 1/7 pilot , you can order now ! the white colour is the 1/7 products , it is not yet paint , the first batch are white and let you paint your colour . the coming out will have orange /red /blue and special request ! the smaller size one is the master plug for the 1/8 size . so it can not sell you in this moment , it is for make the mold . but come out very soon i think next month ! . so this two size can cover 80% scale fuselage in the market , especial from 550 size to 700 size . The coming 1/10 size will cover all the 500 to 550 size . So i can let all the size models fuselage have their pilot .Possible come out the 450 size (1/12 ) in the end of the year ! But it now
http://www.smartmodel.com.hk/product...0&third_id=219

see the first pilot in my 700 jetranger !

Are these still available?