Thread Tools
May 08, 2012, 11:50 AM
Registered User
A different more powerful motor than the stock that can run all stock ?
A better prop other than the GWS ?
Sign up now
to remove ads between posts
May 11, 2012, 09:19 AM
Commander4

Stryker Heads Up!


I will try to remove the old fins and reuse them but it is hard to tell where the fin foam starts, and the fuse foam ends. The new fuse came with new bottom fins, but not upper ones. Still waiting for new fins from HH.
May 11, 2012, 09:26 AM
Commander4

Stryker Heads Up


Has anyone tried using the old electronics from a Stryker 27Q 180 and incorporate them into a different wing form such as a Zagi? Maybe a mini-Zagi. I would be interested in the results. My only beef so far with the little 27Q is the brittle foam. Maybe another wing form could be wrapped with string tape for strength. The way the top fins are on the 27Q it would be very difficult to wrap with tape, or a strengthening type of covering. I know the Zagi's are famous for their durability.
May 11, 2012, 09:44 AM
Just wanna fly!
grovey's Avatar
Quote:
Originally Posted by Commander4
I will try to remove the old fins and reuse them but it is hard to tell where the fin foam starts, and the fuse foam ends. The new fuse came with new bottom fins, but not upper ones. Still waiting for new fins from HH.
Is your fuselage destroyed? If so then use an exacto knife and cut the fuse away slowly around the fins until you can make heads or tails of where the vertical stabilizers are.
May 11, 2012, 10:04 AM
Registered User
joemi's Avatar
Quote:
Originally Posted by RCBABBEL
T,

The UMX Sbach and the UM Stryker both use the AR6400NBL reciever.

I've toasted two recievers on my (3S) powered Stryker.

I currently have 50 (3S) powered flights on my Sbach.
(Charged to 12.0V)

-------------------------------

3S on the Beast 3D is another story.
I'm at 95 flights right now.
The first 40 flights were on 3S packs charged to 12.0V
My last 40 flights have been on fully charged 3S Hyp 180s.

No reports of 3S problems on the B3D at this time.

I'm very hopeful for the same results on the CC & MiG.


rc
Thanks for testing! It's too bad they haven't been working out in the Stryker.

I'll have to get some 3S from you though if they are working in the other micros like the Beast.
May 11, 2012, 10:20 AM
Do you see what I see?
rcoconut's Avatar
[QUOTE=Commander4;21583413]I will try to remove the old fins and reuse them but it is hard to tell where the fin foam starts, and the fuse foam ends.[QUOTE]

Got my micro Stryker used & had to do the same thing, remove both fins. I used a #11 hobby knife to cut around the fin between the fuselage. One came out easy & the other needed a bit more "scrapping" but you will be able tell where the fin starts & ends. I needed to remove a little more excess fin foam from the one that needed more work to remove but eventually they both came out clean. I think if you give it a try you'll be able to see what grovey is talking about.
May 11, 2012, 11:14 AM
Registered User
Quote:
Originally Posted by FedericoA
A different more powerful motor than the stock that can run all stock ?
A better prop other than the GWS ?
So no one ?
May 11, 2012, 01:08 PM
Registered User
Quote:
Originally Posted by FedericoA
So no one ?
What's wrong with GWS? I use Babbelbatts and prop it up with a 4040. I have never looked into a more powerful motor because a 60mph 2.5oz piece of foam is crazy enough for me. And, with "the mix" it rolls like a drill and does 50g turns.

So, that's all I have to offer.
May 11, 2012, 02:51 PM
Shine On !
AtomHeartMother's Avatar
+1 Erkq

You want more speed and you'll also need to start looking at carbon tow/carbon rod reinforcement. It's just foam and with the gws 4x4/better battery combo, coupled with the super mix, I can see the wing flexing pretty good in hard turns.
I suppose if you really wanted to hot rod it and just go in straight lines to preserve the wing, more horsepower would work. You'd most likely have a heavier bird though. I really don't see a need to tinker with 3s either personally. It scoots pretty well with the above mentioned mods. To me, this is a great balance of speed, battery life and maneuverability. If I want to go faster I'll build a mini hotliner or something..
May 12, 2012, 08:00 AM
Registered User
Quote:
Originally Posted by AtomHeartMother
+1 Erkq

You want more speed and you'll also need to start looking at carbon tow/carbon rod reinforcement. It's just foam and with the gws 4x4/better battery combo, coupled with the super mix, I can see the wing flexing pretty good in hard turns.
I suppose if you really wanted to hot rod it and just go in straight lines to preserve the wing, more horsepower would work. You'd most likely have a heavier bird though. I really don't see a need to tinker with 3s either personally. It scoots pretty well with the above mentioned mods. To me, this is a great balance of speed, battery life and maneuverability. If I want to go faster I'll build a mini hotliner or something..
Ok i understand.....And agree...can you tell me what is the mix you mention ?
I have a DX6i for it, but have also a DX8.
Last edited by FedericoA; May 12, 2012 at 08:01 AM. Reason: mistake writing
May 12, 2012, 12:58 PM
Shine On !
AtomHeartMother's Avatar
Quote:
can you tell me what is the mix you mention ?
Super mix
May 12, 2012, 01:48 PM
Registered User
Quote:
Originally Posted by AtomHeartMother
Super mix
Be careful, though, as it tends to drive the servos over 100% at the corners. But I found the results were worth it. I think you can get the same effect with your DX8's mix capability without the overdrive. But I've not done it. I use my DX6 to fly the Stryker. I've never moved the Stryker into my DX8. Just lazy I guess.
May 15, 2012, 10:30 PM
Registered User
Hi, I just got one of these, and the elevator goes in the opposite direction that I want it to. Whenever I reverse the channel, elevator acts like aileron. I activated elevon on this.
May 15, 2012, 11:59 PM
Registered User
Quote:
Originally Posted by minimicrorc
Hi, I just got one of these, and the elevator goes in the opposite direction that I want it to. Whenever I reverse the channel, elevator acts like aileron. I activated elevon on this.
The destructions in the manual are wrong. There's an update somewhere early in this thread. Sorry to not be more helpful, but I'm supposed to be doing something for my wife right now. At least you know in which direction the solution lies.
May 16, 2012, 01:47 AM
Registered User
Quote:
Originally Posted by erkq
The destructions in the manual are wrong. There's an update somewhere early in this thread. Sorry to not be more helpful, but I'm supposed to be doing something for my wife right now. At least you know in which direction the solution lies.
k thanks


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
New Product Parkzone F 27Q stryker friz Electric Plane Talk 181 Nov 04, 2011 02:54 PM
Video Parkzone Stryker F-27Q updated 23/07/2011 Anda Inc. Electric Plane Talk 3 Jul 23, 2011 05:26 AM
For Sale Latest PNP F-27Q Stryker (NIB) Kansas City Area $180 rcwarrior Aircraft - Electric - Airplanes (FS/W) 0 Jun 22, 2011 11:02 AM