Originally Posted by kushal_22
You can set it
Turn on your tansmitter put throttle to full then plug in whatever UM you are flying that has BL motor listen for the tones then move throttle to mid point wait for tones move throttle back to full wait for the beeps 1st you get one beep wait and you will hear 2 beeps wait some more and 3 beeps wait some mre and 4 beeps once you hear the 4 beeps bring throttle to "Off" position wait for tones and unplug battery you will then be set for Strongest brake its a full 15 second wait to get to the 4 beeps. Remember you have to have the throttle at full wait for tones go to half throttle then back up to full and THEN wait through the three other settings it takes 15 seconds to get to the setting you want.
Mal, I finally got around to trying this and it worked great! The one difference is at the end of it when I went to full off it just kept cycling through the brake tones, it didn't hold the setting. I finally figured out I had to go to half throttle at the end rather than full off, then it emitted a different tone and I unplugged, plugged back in and it was done. Sooooo nice to have prop brake when the throttle is cut now, no more windmilling prop!