Official- Extreme Flight 60" Extra 300 EXP Build thread - Page 251 - RC Groups
Thread Tools
Jun 23, 2012, 08:45 AM
Some.. call him Tim...
Ducati Mechanic's Avatar
Quote:
Originally Posted by Buzzed
Just applied my B & E Graphix Air Release Vinyl stars. They went on fast, easy, and bubble free. Very cool indeed!

-Buzzed



http://www.bandegraphix.com/
looks great Buzzed! Those stars sure are fun to lineup. I also just got my stars from B&E. The white looks great, but I decided to go a different rout.


I started using a HPP-21 this week also, thanks to Doc's input. All six of my 5245mg's were set at 1(dead band), The 5685's in my 78" were also fine. I did enjoy resetting the center points, and end throw! What a treat! my 78" is setup perfect now, and I picked up 5deg on the elevator. Don't know how I lived without it? The HP22 interface is only $27.00!
Last edited by Ducati Mechanic; Jun 23, 2012 at 09:50 AM.
Sign up now
to remove ads between posts
Jun 23, 2012, 09:48 AM
Сделайте Америку Великой Снова
7oneWo1f's Avatar
...
Last edited by 7oneWo1f; Aug 05, 2012 at 01:44 PM.
Jun 23, 2012, 10:52 AM
3D Sunset Flier
Buzzed's Avatar
Quote:
Originally Posted by _OZ_
Vinyl graphics go on so nice.
Looks great Buzzed!
Yep! I'm gonna' tell all my buds about B&E.



Quote:
Originally Posted by cwojcik
Do all sets come with a laser-guided Corgi?
Bwahahahaaaaaa!

Yeah, that's Dash the Wonder Dog. He's 220-volts of trouble.

Jun 23, 2012, 10:54 AM
3D Sunset Flier
Buzzed's Avatar
Quote:
Originally Posted by Ducati Mechanic
looks great Buzzed! Those stars sure are fun to lineup. I also just got my stars from B&E. The white looks great, but I decided to go a different rout.


I started using a HPP-21 this week also, thanks to Doc's input. All six of my 5245mg's were set at 1(dead band), The 5685's in my 78" were also fine. I did enjoy resetting the center points, and end throw! What a treat! my 78" is setup perfect now, and I picked up 5deg on the elevator. Don't know how I lived without it? The HP22 interface is only $27.00!
Wow, yours look great. I slapped mine on fast last night. First timer and all...

Jun 23, 2012, 12:20 PM
Registered User
TG43's Avatar
I got a hfp-25 today. Can't wait to get done work and check my shiznit.
Last edited by TG43; Jun 23, 2012 at 12:26 PM.
Jun 23, 2012, 01:33 PM
aka ECAA3D
m0dest's Avatar
I have a question about mounting the servos.

In the manual it shows using the grommets and brass inserts for mounting the servos.
The aileron cutouts aren't big enough. Is everyone mounting these directly? It's the perfect size for the HITEC servos, but w/o grommets.

So...if mounting directly there is a small area where the mounting screws have no thread. It seems the mounting screws need to be replaced if going with this option.
Jun 23, 2012, 01:53 PM
Some.. call him Tim...
Ducati Mechanic's Avatar
Quote:
Originally Posted by Buzzed
Wow, yours look great. I slapped mine on fast last night. First timer and all...

Thanks buzzed!


Ecaa3d,

The rubber grommets, and sleeves will fit in the cut outs. You might need to shave 1/32", or so from the sheeting, but they fit fine.
Jun 23, 2012, 01:54 PM
Registered User
shadow102's Avatar
the aileron holes are perfect size for the servos with the grommets, i think when i tightened mine down they sat in the recess better
Jun 23, 2012, 02:29 PM
aka ECAA3D
m0dest's Avatar
Quote:
Originally Posted by shadow102
the aileron holes are perfect size for the servos with the grommets, i think when i tightened mine down they sat in the recess better
Mine isn't perfect....I took a good 1/32 off of each side of the cutout, still have to squeeze it in. No big deal.... just thought maybe they changed some things up recently. Watching the Lazer build video he isn't using them so I assumed as such. The mounting screws would have run out of thread in my case(did the measurement) so I'll shave a bit off the cutout.

Thanks for the help!!
Last edited by m0dest; Jun 23, 2012 at 02:33 PM. Reason: more info and thanks
Jun 23, 2012, 02:40 PM
Some.. call him Tim...
Ducati Mechanic's Avatar
No problam. The laser is differant due to the size of the servo's. Smaller HS65(size servo's) dont have brass and rubbers. The larger 5245 size servo rely on the rubbers for proper mounting.
Jun 23, 2012, 05:54 PM
Registered User
TG43's Avatar
My 7245's all show 2:16 for dead band width. What's that mean? I don't have time to research (cuz I got flying to do!). But really is 2 around center and 16 at the ends I dunno.
Jun 23, 2012, 06:26 PM
Registered User
I have the HV-5665MG's in my 73" Sbach and I'm not overly impressed with their centering. But, probably to be expected from $50 sport digitals.
Jun 23, 2012, 06:31 PM
Extremely Twisted
cwojcik's Avatar
2 is the current value, 16 is the highest it will go. Set it to 1.
Jun 23, 2012, 07:36 PM
Registered User
TG43's Avatar
Thanks cody
Jun 23, 2012, 10:42 PM
Сделайте Америку Великой Снова
7oneWo1f's Avatar
...
Last edited by 7oneWo1f; Aug 05, 2012 at 01:45 PM.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Build Log Extreme Flight 70" Extra 300 EXP - build/fly/video hercdriver7777 3D Flying 2650 Aug 11, 2017 03:46 PM
Build Log Extreme Flight 60" Edge 540T EXP - Build/Fly/Video FlopGun 3D Flying 249 Apr 16, 2012 11:46 AM
Help! D-60 build thread Chronic DS'er Dynamic Soaring 3 Jun 23, 2011 11:04 PM
Sold Extreme Flight 58" Extra Ready To Fly (GA) traderdave2 Aircraft - Electric - Airplanes (FS/W) 11 Apr 26, 2011 06:33 PM
Video EXTREME FLIGHT RC EXTRA 300EXP in Action! EXTREME FLIGHT Electric Plane Talk 1 Jun 10, 2009 09:45 PM